SharkBite 1/2 Imbotta biex tikkonnettja x 1/4 pulzier (3/8 pulzier OD) Imbotta biex tikkonnettja Valv ta' waqfien dritta, Quarter Turn, Pajp PEX, Ram, CPVC, PE-RT, HDPE, 23337-0000LF

Name: SharkBite 1/2 Imbotta biex tikkonnettja x 1/4 pulzier (3/8 pulzier OD) Imbotta biex tikkonnettja Valv ta' waqfien dritta, Quarter Turn, Pajp PEX, Ram, CPVC, PE-RT, HDPE, 23337-0000LF
Brand: SharkBite
SKU: 0767654950746
Availability: InStock

Brand:SharkBite

3.7/5

€

DESKRIZZJONI TAL-PRODOTT Issimplifika l-proġetti tal-plaming tiegħek bil-valv ta 'waqfien dritta tal-kompressjoni tal-imbottatura tar-ram SharkBite. Il-mekkaniżmu push-to-connect ta 'dan il-valv ta' waqfien jippermettilek tikkontrolla u tagħlaq il-fluss tal-ilma għal attrezzaturi jew apparat għall-manutenzjoni u t-tiswija. Dan it-twaħħil tal-plaming tar-ram huwa ideali biex jaħdem fi spazji stretti u jista 'jiġi installat f'linji mxarrba. Dawn il-valvi ta 'waqfien dritti push-to-connect huma faċli biex jiġu installati, kompatibbli ma' PEX, CPVC, PE-RT, SDR-9 HDPE, u pajp tar-ram, u ma jeħtieġu l-ebda għodda speċjali, kolla, crimping, jew issaldjar għall-installazzjoni. Dawn il-valvi tal-kompressjoni push-fit għandhom dehra attraenti tal-kromju sleek u huma adattati għal tiswijiet kummerċjali jew proġetti ta 'titjib tad-dar. Il-valvi, il-klipps, il-ġonot u l-adapters kollha ta’ SharkBite huma manifatturati u ttestjati fl-Istati Uniti. MILL-MANIFATTUR Il-fittings push-fit Shark Bite huma l-aktar mod mgħaġġel u eħfef biex jingħaqdu ram, CPVC u PEX fi kwalunkwe kombinazzjoni-imxarrab jew niexef-mingħajr issaldjar, klampi, unjonijiet jew kolla. Daħħal biss il-pajp u s-snien tal-istainless steel bite down u qabda ssikkata, filwaqt li O-ring ifformulat apposta jikkompressa biex joħloq siġill perfett. Iż-żarmar huwa daqstant mgħaġġel billi tuża l-għodda sempliċi ta 'skonnettjar. Allura fittings u valvi jistgħu jinbidlu u jerġgħu jintużaw faċilment. Jistgħu anke jiġu mdawra wara l-assemblaġġ għal installazzjoni aktar faċli fi spazji stretti. Fittings iċċertifikati għal 200 PSI u 200-DegreeF (93-DegreeC). Disinn iċċertifikat għall-istandard tal-prodott ANSI/NSF-61 u ASSE 1061 għall-użu fl-ilma tax-xorb u d-distribuzzjoni tal-ilma tat-tisħin idronic. Approvat biex jintuża taħt l-art u wara l-ħitan mingħajr pannelli ta’ aċċess

Ebda unitajiet disponibbli

EAN: 0767654950746

Kategoriji Għodda u Titjib tad-Dar, Plumbing mhux maħdum, Partijiet tal-faucet, Valvoli tal-faucet,

MAGĦMULA FL-Istati Uniti: Il-valvoli, il-klipps, il-ġonot u l-adapters kollha ta’ SharkBite huma manifatturati u ttestjati fl-Istati Uniti. PREFERITI MILL-PRO: Għodod u fittings SharkBite jissodisfaw l-istess standards għoljin għal applikazzjonijiet ta 'plaming kummerċjali u residenzjali, li jgħaqqdu durabilità u faċilità ta' użu; karatteristika finitura chrome sleek għal dehra attraenti. FAĊLI GĦALL-INSTALLAZZJONI: Dan il-valv ta 'waqfien innovattiv għandu daħla push-to-connect ta' 1/2 pulzier u valv tal-ballun tar-ram b'port sħiħ ta 'kwart-dawra għal tħaddim malajr u faċli; l-ebda għodda speċjali, crimping, kolla, jew issaldjar meħtieġa; jistgħu jiġu installati fil-linji mxarrba. VERSATILI: Fittings ta 'waqfien dritti tal-imbottatura tar-ram jaħdmu tajjeb ma' PEX, CPVC, PE-RT, SDR-9 HDPE, u pajpijiet tar-ram. SHARKBITE BRASS PUSH STRAIGHT STOP: Il-valvi ta 'waqfien dritti tal-imbottatura tar-ram huma użati biex jikkontrollaw u jagħlqu l-fluss tal-ilma għal attrezzaturi jew apparat għall-manutenzjoni u t-tiswija; ideali għax-xogħol fi spazji stretti; neħħi billi tuża clip skonnettja jew skonnettja tongs.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	SharkBite
Brand	‎SharkBite
Certification	‎Nsf
Color	Straight
Color	‎Straight
Country of Origin	‎China
Customer Reviews	4.6 4.6 out of 5 stars 133 ratings 4.6 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Exterior Finish	Copper
Exterior Finish	‎Copper
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	2.25 x 1.35 x 4.5 inches
Item Dimensions LxWxH	‎2.25 x 1.35 x 4.5 inches
Item model number	‎23337-0000LF
Item Package Quantity	‎1
Item Weight	0.01 Pounds
Item Weight	‎0.01 Pounds
Item Weight	‎0.16 ounces
Manufacturer	‎Cash Acme
Material	Brass
Material	‎Brass
Measurement System	‎Inch
Number Of Pieces	1
Number Of Pieces	‎1
Part Number	‎23337-0000LF
Pattern	‎Valve
Product Dimensions	‎2.25 x 1.35 x 4.5 inches
Size	1/2 in. x 1/4 in.
Size	‎1/2 in. x 1/4 in.
Style	‎Straight
Voltage	‎120 Volts
Warranty Description	‎For warranty information on this product, please call our Internet Customer Service Center at 1-877-700-4242.

5 Star

4 Star

3 Star

2 Star

1 Star

Ikteb ir-reviżjoni tiegħek

L-email tiegħek mhux se tiġi ppubblikata. L-oqsma obbligatorji kollha huma mmarkati bi^*

Il-klassifikazzjoni tiegħek

Scritto da: T. J. Craig Jr.

What an easy installation...

We put our old refrigerator in the basement and wanted to be able to make extra ice when needed. I had a 1/2" water line right above that was capped and was able to cut the end and pop on the sharkbite fitting. NO problems, but I was careful... A straight cut, not angled... no burrs on the end of the pipe, I smoothed them off... and made sure the fitting had fully bottomed out. Definitely recommend but proper installation is critical.

Scritto da: Phillip Johnson

Don't call a plumber do it yourself

Don't have solder, flux and a mini torch? Not a plumber or trust your skills when soldering? OK, buy this instead. Reem the copper end with a knife so that there's no burr and slap this puppy on and turn your water on. Just make sure you push this on completely, that's all. As easy as it gets and holds city water pressure no problem. Worth the price so if you need this then just buy it already.

Scritto da: Dustin Pearson

Worked perfect for installing new humidifier on my furnace!

Ran the pex line over there, threw this on the end. hooked up a 1/4' stainless braided hose ('ice maker hose') and it worked perfect. I like having the shut off right there by the humidifier cause it makes maintenance just a little faster. SharkBite fittings work excellent and I have yet to see one fail.

Scritto da: Karen Kent

Very easy to turn and the quick connect hardware was included

Very easy to turn and the quick connect hardware was included. It only took a few spanner turns to seal it. While my application didn't call for such lush looks (these are meant for toilets) the chromed brass is pretty. The clip intended to hide the disassembly ring doubles as a removal tool if you turn it upside down ;3 For anyone worried about it, I removed this from the same pipe twice and it still seals just fine. This particular design should be able to be removed and reinserted a handful of times with no problems.

Scritto da: Eizu

Has Anyone Else Had One Of These Leak?

Sharkbite is a premium brand when it comes to push-on fittings, so I was surprised when I pushed this guy onto some PEX tubing and it leaked. I haven't had that problem with the other Sharkbite brand valves and pressure regulator that I bought. I monitored it for a few days, and it seemed to eventually stop leaking after I fiddled with it a few times. I don't know if it is my paranoia, but it still feels damp at that connection when I touch it. Needless to say, I am replacing this fitting with a crimp on PEX tee fitting, and a compression fitting ice maker shutoff valve. The peace of mind of knowing that our plumbing will not leak was worth the extra expense.

Scritto da: Austin Walker

or pex so they are great to have on hand

Local supply house did not carry these. I was adding a whole home humidifier to my house and the HVAC installer wanted to use a saddle valve. I purchase a sharbite T and one of these valves instead. These can be used for copper, pvc, or pex so they are great to have on hand. Have used several sharbite problems over many years and have never had one leak or any problems.

Scritto da: Machaon

Fast and easy solution for inserting a stop valve into a water line.

Sharkbite is so easy and fast to use. This stop valve makes installation easy. Just cut the pipes/tubing and insert. Really good quality and very functional. We've replaced quite a bit of our 50 year old plumbing with Sharkbite. Nice to be able to repair plumbing without welding or having to use a bunch of tools.

Scritto da: Michael

Wonderful

Great

Scritto da: Juan

Easy way to do it

Wrong size ,send back