Eagle Tool US EM50036 Installer Drill Bit, Carbide Tip għal Applikazzjonijiet tal-Ġebla, 1/2-Inch minn 36-Inch, Magħmula fl-Istati Uniti, Iswed 1/2 in. 36 in.

Name: Eagle Tool US EM50036 Installer Drill Bit, Carbide Tip għal Applikazzjonijiet tal-Ġebla, 1/2-Inch minn 36-Inch, Magħmula fl-Istati Uniti, Iswed 1/2 in. 36 in.
Brand: Eagle Tool US
SKU: 0850078004666
Availability: InStock

Brand:Eagle Tool US

3.2/5

€

Bit tal-ġebel tal-ponta tal-karbur ta 'kwalità għolja ta' Eagle Tool. Huwa l-aħjar għal sitwazzjonijiet diffiċli. Dan il-bit jiġi standard bi tliet qabda ċatta li ma jiżloqx, toqob ta 'akkomodazzjoni tal-ħut fit-drill u x-xekk ta' l-azzar tar-rebbiegħa Flessibbli. Taħdem tajjeb fil-blokka tal-konkrit, madum, briks u l-biċċa l-kbira tal-prodotti tal-ġebel l-oħra. Dijametru tar-ras ta '1/2 pulzier, dijametru tax-xewk ta' 1/4 pulzier, u t-tul ġenerali huwa ta '36 pulzier.

Ammont

Żid mal-CART Ixtri issa

EAN: 0850078004666

Kategoriji Għodda u Titjib tad-Dar, Għodda tal-Enerġija u tal-Idejn, Power Tool Partijiet u Aċċessorji, Power Drill Partijiet u Aċċessorji, Drill Bits, Installatur Drill Bits,

Magħmul fl-Istati Uniti. Żid Quick Switch Hex biex tadatta għal Quick Change chuck numru tal-parti ETHXKIT250. Tliet qabda ċatta li ma jiżloqx fuq it-tarf taċ-ċokk. Xank flessibbli ta 'l-azzar tar-rebbiegħa b'toqob ta' akkomodazzjoni tas-sajd tal-wajer fir-ras u x-xikel. Bit tal-installatur tal-ponta tal-karbur.

Brand	Eagle Tool US
Country of Origin	USA
Cutting Diameter	0.5 Inches
Domestic Shipping	Item can be shipped within U.S.
International Shipping	This item can be shipped to select countries outside of the U.S.
Item Dimensions LxWxH	36 x 0.5 x 0.5 inches
Item model number	EM50036
Manufacturer	Eagle Tool US
Material	Carbide, steel, spring steel
Product Dimensions	36 x 0.5 x 0.5 inches; 9.6 Ounces
Shank Type	Triangle

5 Star

4 Star

3 Star

2 Star

1 Star

Ikteb ir-reviżjoni tiegħek

L-email tiegħek mhux se tiġi ppubblikata. L-oqsma obbligatorji kollha huma mmarkati bi^*

Il-klassifikazzjoni tiegħek

Scritto da: Travis Milner

Important for remodeling.

This bit is one of those tool's you rarely need, and when you do, you need it now! I had to run new electrical wire in a cinder block wall from the attic, was a struggle. I tried various ways unsuccessfully I mite add. Before I found this bit. Was stiff enough to apply pressure yet flexible enough that I could get it where I needed in my short attic. Made short work of something that I fought for a week. Glad I have, price was great. Prompt delivery.

Scritto da: Jonny84

Great bit very handy

I needed to run a new receptacle over an existing fireplace which required drilling horizontally over the fireplace. This bit went through cinder block with ease. Also went through brick with a little more effort. I got the 1/4” shank which is great and does have a little flex but obviously not as much as a smaller shank. I have a wood drill bit with a 3/16” shank and that thing can make a 90degree bend and still drill a hole. You might be able to get a 45 degree angle with this 1/4” shank, maybe! But since I was drilling through brick I was glad I got the larger shank as it required a lot more forward pressure and a small shank would have been bending and flexing too much during drilling.

Scritto da: James Bushey

PAY ATTENTION: THIS IS A MASONRY BIT

As of this review, the title and specs do not indicate that it is a masonry bit. You can not interchange a masonry or a wood bit, period. Also, this is a good bit more rigid than it is flexible. A very good buy if you are needing to drill through masonry. They do mention the word masonry within the description and I do take responsibility for not checking closer.

Scritto da: D P

worked perfectly

as you would expect, this drills a hole thru a 2x4 and into a large gap area and in my case an open attic space to locate a hole. very useful

Scritto da: AT

Did the job for me

Was drilling all day. It did the job for me.

Scritto da: Rideonbikesand R.

Is it the bit or me?

I needed to drill a hole for an outdoor light fixture. The hole was to be frilled in a brick and mortar lamp standard about 4 foot tall. The bit worked good at first, then began to bog down. I was using a 1/2 hp hammer drill, which seemed to turn it ok but not great. The bit finally became stuck in the boring hole and was not removable. It broke in the hole leaving me without a bit and about a foot short of my goal. I don't know if it was the bit or my use of it because I have never attempted anything like this before.

Scritto da: Amazon Customer

Junk, Not sharp and quickly broke

Unlike most reviews I bought this to use for masonry holes. Unfortunately it was complete junk. I got one hole drilled and part way into the second hole it snapped clean off and was stuck in the cinder block. The bit does have a lot of flex so I kept the speed a little lower and a normal bit but it did a horrible job cutting into the block and then failed. Ended up being a waste of money for me and I can't even say I got good use out of it because I only had 4 holes to drill and it couldn't even complete the job. Wish I could return it and get my money back.

Scritto da: David

Works well for wire fishing seeker bit

Purchased to use for drilling into floor to fish wire up through crawl space. Plenty long enough to penetrate several layers of headers/subfloor, etc to find a route to fish wire.

Scritto da: Amazon Customer

Don't buy this item

Probably the lowest quality drill bit you could possibly find. Total garbage. Save your money.

Scritto da: Red Masters

Waste of my time

Your insistence upon a review

Scritto da: Roy Walters

Four Stars

looks like it well do the job for me