Moen 3853ORB Sostituzzjoni 7-Inch Tub Diverter Spout 1/2-Inch Slip Fit Konnessjoni, Żejt Rubbed Bronż

Name: Moen 3853ORB Sostituzzjoni 7-Inch Tub Diverter Spout 1/2-Inch Slip Fit Konnessjoni, Żejt Rubbed Bronż
Brand: Moen
SKU: 0026508164525
Availability: InStock

Brand:Moen

3.6/5

€

DESKRIZZJONI TAL-PRODOTT Hand Shower 69-il pulzier Double Lock Hose, Satine MILL-MANIFATTUR Minn finituri li huma ggarantiti li jdumu tul il-ħajja, għal faucets li jibbilanċjaw perfettament il-pressjoni tal-ilma tiegħek, Moen jistabbilixxi l-istandard għal sbuħija eċċezzjonali u disinn affidabbli u innovattiv. Disinji prontezza, stili b'differenza għal kull ħaġa oħra, faucets u attrezzaturi li huma livable u dejjiema, dawn huma biss uħud mir-raġunijiet li Moen hija l-marka numru wieħed ta 'faucet fl-Amerika ta' Fuq. Iżda, Moen jagħmel aktar milli jagħmel faucets. Huwa wkoll fornitur ewlieni ta 'sinkijiet tal-kċina stylish u aċċessorji tal-banju innovattivi. Fiż-żmien li Moen ilha parti mill-familja Fortune Brands, introduċiet firxa wiesgħa ta 'prodotti stylish preferuti mill-konsumatur - pożizzjona lil Moen bħala l-marka tal-plaming numru wieħed, kemm fis-sehem tas-suq kif ukoll fl-imħuħ tal-konsumaturi. Kemm jekk qed tippjana remodel tal-kċina fuq skala sħiħa b'attrezzaturi u faucets tal-kċina premium, jew jekk qed tfittex aġġornamenti sempliċi għall-viti tal-banju tiegħek u tikkoordina tagħmir tal-plaming u tal-banju - Moen iġorr għażla kbira ta 'prodotti biex jgħinuk toħloq il-kċina jew banju ta' ħolm tiegħek. Jekk l-istil tad-dekorazzjoni tiegħek huwa tradizzjonali, modern jew xi mkien bejniethom, Moen joffri l-istili, il-finituri u l-faucets, attrezzaturi u aċċessorji ta’ kwalità għall-kċina u l-banju li qed tfittex. Il-faucets Moen kollha jiġu b'Garanzija għal Ħajja kontra tnixxijiet, taqtir u difetti tal-finitura. Ma' Moen, dejjem issib il-bilanċ perfett bejn stili li tħobb u innovazzjoni li tista' tgħix magħhom. Ixtrih għall-dehra. Ixtrih għall-ħajja.

Ammont

Żid mal-CART Ixtri issa

EAN: 0026508164525

Kategoriji Għodda u Titjib tad-Dar, Plumbing mhux maħdum, Partijiet tal-faucet, Sink & Bathtub Spouts,

Kit ta 'immuntar p/n 86029 mibjugħ separatament. Jiżen biss 7 lbs. Muntaturi flush fuq il-qafas tat-trakk tal-idejn. Il-profil għax-xejn u t-tarf ewlieni joffri faċilità ta 'użu. 6000 Series Aluminum Alloy tipprovdi proporzjon massimu ta 'saħħa għall-piż.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Moen
Brand	‎Moen
Color	Oil Rubbed Bronze
Color	‎Oil Rubbed Bronze
Country of Origin	‎China
Customer Reviews	4.5 4.5 out of 5 stars 458 ratings 4.5 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Finish	‎Oil Rubbed
Finish Type	Oil Rubbed
Finish Type	‎Oil Rubbed
Handle Type	Lever
Handle Type	‎Lever
Included Components	Tub Spout
Included Components	‎Tub Spout
Installation Method	‎Wall Mounted
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎Yes
Item Dimensions LxWxH	‎10.25 x 2.75 x 3.75 inches
Item model number	‎3853ORB
Item Package Quantity	‎1
Item Weight	‎1.05 pounds
Manufacturer	‎Moen Incorporated
Model Name	‎Moen Collection
Mounting Type	Deck Mount
Mounting Type	‎Deck Mount
Number of Handles	2
Number of Handles	‎2
Part Number	‎3853ORB
Product Dimensions	‎10.25 x 2.75 x 3.75 inches
Recommended Uses For Product	Bathroom
Recommended Uses For Product	‎Bathroom
Size	‎0.5 Inch
Special Feature	Durable
Special Feature	‎Durable
Special Features	‎Durable
Spout Reach	‎7 Inches
Style	Transitional
Style	‎Transitional
Warranty Description	‎Limited Lifetime Warranty

5 Star

4 Star

3 Star

2 Star

1 Star

Ikteb ir-reviżjoni tiegħek

L-email tiegħek mhux se tiġi ppubblikata. L-oqsma obbligatorji kollha huma mmarkati bi^*

Il-klassifikazzjoni tiegħek

Scritto da: Logan

Great replacement slip-on tub spout.

This is a nice brushed nickel moen tub spout. It’s a slip on so you don’t need to have a soldered male threaded fitting, this just slips over 1/2 inch copper and you use an Allen wrench to tighten it from the bottom. It says the minimum length is 3 1/4” but the copper valve coming from my customers wall was only 2.5” and it still worked great. Took about 30 seconds to install. Highly recommend.

Scritto da: Gfro

Perfect replacement so far

The diverter broke on my old one. I called a plumber out and they couldn’t get or wouldn’t get the correct replacement and couldn’t get it working without it leaking. They were already out two times and I was getting upset that they had to come out a third time. I ordered this and replaced it in under 10 minutes. No leaks and looks correct for my shower/tub

Scritto da: Amazon Customer

Direct fit, but still leaked

Bought to replace a leaking diverter valve that i couldn't get to stop dripping. This was an exact replacement. Diverter valve leak saw significant improvement, but still was present, even after removing restrictor from shower head

Scritto da: WeaveBonita

Easy install!

Easily attaches to open copper pipe. Seems water tight. Hopefully it holds up for years to come.

Scritto da: PTF

Nice Spout: description / instructions a mystery

I used this to replace an expensive Kohler Alteo diverter that I could never get to divert without leaking or humming. This one works great. Barely a few drops of water come out the tub spout when the diverter is engaged. it is nice looking also - the color matched my chrome Kohler mixer handle. The measurements on the Amazon description are wrong ("3.75 x 4 x 4 inches"). The spout is 7 inches long and the water outlet falls about 6.5" from the tub wall. This is nice because it throws the water a little farther away from the drain control knob on the tub - which will never seal perfectly. The installation instructions from the company, and from a tiny piece of paper in the box, are just bizarre. It says that the 1/2" diameter pipe stub coming out of the wall should be 3 1/4" to 4 1/4" long. Good luck with that. I initially cut mine to 4" - with the spout fully seated you miss the tub wall by at least an inch. After four pipe cuts, I got it to fit properly with a pipe stub length of 3". The spout is slip fit - there are no pipe threads - it seals with a set screw. If your existing pipe stub is not the perfect length, don't install this with a hack saw. A small $15 copper pipe cutter gadget and deburring tool are worth every penny. You will need your own Allen wrench, a marker, a measuring tool, and some caulk / silicone. Installation was not that complicated once I got done scratching my head and staring at it.

Scritto da: Prairie

Tub spout

Diverter valve in existing Moen tub spout went bad. Moen does not have a replacement part for just this and since I’m not the original owner of this house I had to pay an outrageous price to get a new tub spout. Tried after market diverter part, Lowe’s, Home Depot but did not work. The new spout did go on easily and diverts water to shower but don’t know how long this tub spout will work

Scritto da: Amazon Customer

Installation instructions wrong

Seems expensive for what it is. Biggest problem is installation instructions are wrong. Pipe cannot be longer than 3 inches. Instructions say 3 3/4- 4 1/4.

Scritto da: King

Saved me from hiring a plumber!

I put off fixing my tub diverter because I thought I would have to pay a plumber to do it. Then I saw a video on Youtube of how easy it was to install a replacement. This one matches my other Moen pieces and it was very easy to install. You don't even need to turn off the water. No more squealing noises when I pull up to divert water to the shower head and the water flow to the shower head is much better.

Scritto da: Amazon Customer

fit great!

fit great and easy to fit

Scritto da: Kick it

Did the trick.

Replaced my existing corroded unit with this exact replacement. Came complete with diverter gate. Loosened and slipped the old one off, cleaned the copper pipe and slipped this new one on. Worked great. Note: the diverter gate can be replaced in your old unit, it's Moen #101237.

Scritto da: g

Bought in August; stopped diverting by January - ONLY LASTED 5 MONTHS!

Update Jan 17, 2020 : Bought in August; stopped diverting by January - ONLY LASTED 5 MONTHS! Previous review: Solid. Well made. Diverts 99% of water. Only leaks a few drops. Body is metal. Slip on type. 7” length extends past tub ledge so no water splashing backwards.

Scritto da: E. Poole

Better but still leaks water

Our old Moen Tub Diverter leaked lots of water due to the sediment in the water supply corroding the Tub Diverter. This one leaks less but still leaks. I would have preferred a Tub Diverter that does not leak when used in shower mode.

Scritto da: Richard

Accessoire de douche

Qualité supérieure et facile d'installation. Mais dispendieux.