Klein Tools VDV001-081 Tornavit b'ħafna bit, tornavit Punchdown Għodda b'ħafna stil Bayonette b'Barrek tax-xafra heavy-duty għal għodda multipla għall-ħażna tal-bit b'punchdown mingħajr impatt

Name: Klein Tools VDV001-081 Tornavit b'ħafna bit, tornavit Punchdown Għodda b'ħafna stil Bayonette b'Barrek tax-xafra heavy-duty għal għodda multipla għall-ħażna tal-bit b'punchdown mingħajr impatt
Brand: Klein Tools
SKU: 0013044083960
Availability: InStock

Brand:Klein Tools

3.5/5

€

It-tornavit / is-sewwieq tal-ġewż multi-bit ta 'Klein Tools jagħtik il-konvenjenza li tippanċja manwalment il-ġakkijiet tal-ħajt u l-pannelli tal-garża. Bl-azzar tal-għodda bil-makna tiegħu għal saħħa akbar, dan il-prodott jiġi b'multi-bits biex jagħmel ix-xogħol tiegħek aktar faċli. Ix-xaft iżomm 4 ponot universali u jikkonverti għal 2 daqsijiet ta 'sewwieq tal-ġewż u sewwieq hex 1. Kbira għall-użu fuq 110 terminali/patch panel u 66 patch panels. Multi-Tool b'ponta unika għal ġakkijiet punchdown u patch panels. Slotted ponot 3/16 u 1/4-Inch; Suġġerimenti Phillips #1 u #2. Jikkonverti għal sewwieq tal-ġewż ta '1/4 u 3/8-Inch u sewwieq hex 3/8-Inch. Manku tal-kuxxin-Grip għal torque akbar u kumdità msaħħa. Tip-Ident għal identifikazzjoni rapida ta 'għodda. Żewġ ponot tat-tornavit Phillips: #1 u #2. Żewġ ponot tat-tornavit slotted: 3/16-inch (5 mm) u 1/4-inch (6 mm). Żewġ sewwieqa tal-ġewż: 1/4-Inch (6 mm) u 3/8-Inch (10 mm). Għal aktar minn 160 sena, Klein Tools immanifatturat għodod tal-idejn ta 'kwalità premium u ta' grad professjonali li jagħtu l-prestazzjoni, id-durabilità u l-preċiżjoni meħtieġa biex ix-xogħol isir sewwa. Il-familja tagħna ta 'inġiniera, ħaddiema u sengħa tkompli tpoġġi sitt ġenerazzjonijiet ta' għarfien espert f'kull għodda li noħolqu billi nużaw biss materjali tal-ogħla kwalità, abbilità superjuri, u nżommu l-manifattura qrib id-dar kemm nistgħu. Klein mhuwiex biss l-isem tal-kumpanija tagħna, huwa wkoll l-isem tal-familja tagħna. U peress li aħna kumpanija Amerikana li hija proprjetà tal-familja u mmexxija mill-familja, taf li tista’ toqgħod fuqna biex għada nkunu hawn. Klein Tools ma tagħmilx biss prodotti mill-aqwa, aħna nagħmlu prodotti mill-aqwa li jifilħu għat-talbiet tal-professjonisti li jużawhom kuljum... Mill-1857.

Ebda unitajiet disponibbli

EAN: 0013044083960

Kategoriji Għodda u Titjib tad-Dar, Elettriku, Għodda u Ħardwer, Għodod ta 'Inserzjoni u Estrazzjoni tal-Cable, Għodda Punchdown,

Tip-Ident għal identifikazzjoni rapida ta 'għodda. Manku tal-kuxxin-Grip għal torque akbar u kumdità msaħħa. Is-sokit tal-bajonetta (twist & lock) jaċċetta ħafna xfafar punchdown tal-manifatturi. Il-kanna tax-xafra heavy-duty tipprovdi ħażna għal bits. Bits ta 'l-azzar bil-magni għal saħħa superjuri. Terminazzjoni tal-wajer mingħajr impatt. Punchdown Screwdriver Multi-Tool itemm u jaqta 'wajer f'pass wieħed b'xafra punchdown tat-tip maqtugħa ta' 110/66 kombinazzjoni u t-tarf tat-tqattigħ art ta 'preċiżjoni tagħha.

Batteries Included?	‎No
Batteries Required?	‎No
Blade Length	‎3 Inches
Brand	Klein Tools
Brand	‎Klein Tools
Color	Multi
Color	‎Multi
Country of Origin	‎Taiwan
Customer Reviews	4.5 4.5 out of 5 stars 654 ratings 4.5 out of 5 stars
Head Style	Phillips
Head Style	‎Phillips
Included Components	‎VDV001-081
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	‎8 x 1.5 x 1.5 inches
Item model number	‎VDV001-081
Item Package Quantity	‎1
Item Weight	‎0.3 Pounds
Item Weight	‎4.8 ounces
Manufacturer	‎Klein Tools
Material	Blend
Material	‎Blend
Model Name	‎VDV001-081
Number of Handles	‎1
Number of Items	1
Number of Items	‎1
Number Of Pieces	‎1
Part Number	‎VDV001-081
Product Dimensions	‎8 x 1.5 x 1.5 inches
Size	‎One Size
Style	‎Multi-tool with Non-impact Punchdown

5 Star

4 Star

3 Star

2 Star

1 Star

Ikteb ir-reviżjoni tiegħek

L-email tiegħek mhux se tiġi ppubblikata. L-oqsma obbligatorji kollha huma mmarkati bi^*

Il-klassifikazzjoni tiegħek

Scritto da: Paul Sretavong

Got A Lot Of Use, But Broken Spring Like Others

Overall, this is a great punch down tool. But like other reviews, the spring in mine broke as well. I at least got about a years worth of daily usage before the spring gave out in the middle of a punch. For the price, you would expect it last longer.

Scritto da: John Miller

Punch down works

It doesn’t click like a normal punch down tool but great since I can’t find my other one and the cost is much less than a replacement ideal punch down. This might not be great for a big job but for one or two it’s awesome

Scritto da: Manuelita Irma Di Rocco

Neat tool

This was a recommendation by my son, who installs cable. I was intent of doing a job for myself without hiring someone to do it. This was a great handy tool to punch down the CAT wires into a wall ate which I had ran thru the attic from a router to an area I needed a hard wire outlet plate to be. Female determination.

Scritto da: Brandon barkley

Almost perfect

Would get a 5 out of 5 if the bits stayed in better..

Scritto da: James Greco

Best punch down tool I have used

Quality

Scritto da: Pattylew

The punch died.

After about 500 punches the spring died. Hopefully it's not just mine...

Scritto da: David M.

Well-made and mostly efficient tool

I bought this to install Cat6 and RJ11 Keystone jacks for our home network and a corded phone extension. It worked almost perfectly - just make sure that, when you're pushing down on the tool, you hold it at 90 degrees to the jack, otherwise it may either damage the small prongs in the jack or just not push the wire in properly. The integral wire cutter didn't always cut completely through the protruding wires, but they were easy to break off afterwards. It's a nicely-made tool (as usual for Klein), with a strong pouch to store it.

Scritto da: ARIZAI

Quality spring

Bought it a couple weeks ago . After a few days of work the spring gets jam every 2 to 3 punches down the line, very disappointed

Scritto da: GURUTECH

Perfect for what I need it for Quality is superb

Perfect for what I need it for Quality is superb

Scritto da: Dave P

nice looking punch down tool that does not cut it!

I run a data installation company with 4 skilled data engineers our existing krone tools are getting worn out with constant use around 1,000 per day we perchased 1 of these tools, to try out, as they have a good reviews in the states. the tool duly arrived i gave it to the engineers, try this and tell me what you think, well to say that they were NOT happy is an understatement, comments not fit to post here !!!! I have also tried punching with the klien tool i agree with my engineers the unit punches the cat7/cat6/cat5 really well BUT it does not cut the ears of the cables after punching into the krone point i did sent an email to the uk stockist but after a long wait still have not had a reply we have tested the punch tool with variouse units but it still does not pass the test fluke have a simular unit and it has the same issues not cutting i hope my review shakes some trees and a responce from klien toolsis forth coming

Scritto da: John S.

The tool is not as good as Klein make out.

The terminating tool for the Cat6 cable is useless.

Scritto da: Lyle

Will not last even 5000 punch downs.

I purchased this to replace my cheaper quality punch down tool. This lasted 1 year and a half, and the spring broke on the inside and won't punch down. I purchased thinking thr klein punch down was better, my so call cheaper quality had out lasted this klein tool. What a huge disappointment, will buy a different more quality brand. Do not purchase.

Scritto da: Don Thomson

Compression punch broke after only 8 months of use.

I'm in the cabling business - myself and my business partner both had this same tool and both failed almost at the same time due to the compression part of the tool breaking. The tool is only 8 months old. If it didn't break I would have likely given it 5 stars as it worked good up until now. I expected better from Klein Tools. Also the fact that another user and also my business partner had the same exact failure shows this is NOT a one-off defect, but an inherint defect with this punch tool. I have a back up that is not so nice on ergonomics, but it is over 10 years old and still working.