DMT (Diamond Machining Technology) Whetstone Extra Fine, Blu, aħdar, aħmar Kit - Oħxon/ Fine/ Extra-Fine

Name: DMT (Diamond Machining Technology) Whetstone Extra Fine, Blu, aħdar, aħmar Kit - Oħxon/ Fine/ Extra-Fine
Brand: DMT (Diamond Machining Technology)
SKU: 0017042007812
Availability: InStock

Brand:DMT (Diamond Machining Technology)

3.3/5

€

DESKRIZZJONI TAL-PRODOTT - MILL-MANIFATTUR Għal spazji skomdi u tajbin uża Kit ta '3 DMT's offset Dia-Sharp 2-1/2-Inch Diamond Mini-Hone Sharpener. Il-manku offset, iddisinjat ergonomikament jipprovdi sann, deburring u imsin komdu fi spazji stretti. Il-ponta ta 'aċċess faċli tkejjel .033-il pulzier ħoxna. Il-wiċċ tad-djamant ikejjel 2-1/2-Inch minn -3/4-Inch. Kit ta '3: Oħxon (45 mikron / 325 malji) biex terġa' lura malajr tarf traskurat; Fine (25 mikron / 600 malja) għal tarf li jaqtgħu leħja; u Extra-Fine (9 mikron / 1200 malji) biex jillustraw u jirfinaw tarf tal-leħja wara s-sann b'djamant aktar oħxon. Is-sann bid-djamanti huwa mgħaġġel u faċli. Ebda żjut messy meħtieġa - tiffoka niexfa jew bl-ilma. Kostruzzjoni dejjiema se tipprovdi snin ta 'prestazzjoni konsistenti u servizz affidabbli Għal manutenzjoni xierqa tal-għodda, ħaddiema tal-injam, koki u professjonisti oħra jiddependu fuq il-kwalità superjuri u l-versatilità tal-prodotti DMT. Magħmul fl-Istati Uniti.

Ammont

Żid mal-CART Ixtri issa

EAN: 0017042007812

Kategoriji Għodda u Titjib tad-Dar, Għodda tal-Enerġija u tal-Idejn, Għodod tal-idejn, Ġebel li jsann,

Kostruzzjoni dejjiema se tipprovdi snin ta 'prestazzjoni konsistenti u servizz affidabbli. L-ebda żejt mhu meħtieġ - tiffoka niexef jew bl-ilma. Ixxekkel skieken aktar malajr minn ġebel konvenzjonali bil-wiċċ tad-djamant monokristallin ta 'DMT. Kit ta '3 ġebel tad-djamanti f'djamant oħxon biex jittrasforma tarf matt, djamant fin għal tarf li jaqta' l-leħja u djamant extra-fin biex jillustra u jirfina xifer. Jipprovdi aċċess faċli għall-kura tat-tarf f'żoni skomdi u ristretti. Kit ta '3 ġebel tad-djamanti f'djamant oħxon biex jittrasforma tarf matt, djamant fin għal tarf li jaqta' l-leħja u djamant extra-fin biex jillustra u jirfina xifer. Jipprovdi aċċess faċli għall-kura tat-tarf f'żoni skomdi u ristretti. Magħmul fl-Istati Uniti. Mibnija għall-prestazzjoni u d-durabilità. Magħmul minn materjali tal-ogħla kwalità.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	DMT
Brand	DMT (Diamond Machining Technology)
Color	Blue,green,red
Color	‎Blue,green,red
Customer Reviews	4.3 4.3 out of 5 stars 94 ratings 4.3 out of 5 stars
Grit Description	‎Extra Fine,Coarse,Extra-fine,Fine
Grit Type	Extra Fine,Coarse,Extra-fine,Fine
Included Components	‎Dia-Sharp Off Set Kit
Is Discontinued By Manufacturer	‎No
Item model number	‎OD2K
Item Package Quantity	‎1
Item Weight	1.92 Ounces
Item Weight	‎1.92 ounces
Manufacturer	‎DMT
Material	Synthetic
Material	‎Synthetic
Measurement System	‎Metric
Part Number	‎OD2K
Power Source	‎Hand_powered
Product Dimensions	‎11 x 6 x 4.25 inches
Size	‎Kit - Coarse/ Fine/ Extra-Fine
Special Features	‎Manual
Style	‎Kit - Coarse/ Fine/ Extra-Fine
Warranty Description	‎Manufacturer Warranty

5 Star

4 Star

3 Star

2 Star

1 Star

Ikteb ir-reviżjoni tiegħek

L-email tiegħek mhux se tiġi ppubblikata. L-oqsma obbligatorji kollha huma mmarkati bi^*

Il-klassifikazzjoni tiegħek

Scritto da: ddangka

Very short time of product life

It is good at first, but after just 3 times usage, it is losing their sharpening power gradually. It seems the diamond particles feel offed from metal. I bought several diamond sharpening stone, rod, etc, and experienced same problem. I will not buy diamond sharpening tools any more.

Scritto da: GLB

Good useful sharpening tools for knifes

Over the 50+ years I have been sharpening tools, I have seen and used a wide variety of stones, carborundum (old time technology), Arkansas natural stone, steel hones, and no name stones. This mini-hone diamond dust set has become my favorite for knives including ceramic knifes. Use all three or at least the mid and fine grades and water for lubrication / wash. They work great. They are not the best for narrow places such as tool bits. I also have some small 1/4 wide diamond "files" that work better for small carbide tooling. I have not used them long enough to know how long till the diamond dust falls off. They don't need much force. I suspect if you use a lot of force you may damage the tool by flexing the sheet metal that the diamonds are embedded to. That is why I give them only 4 stars.

Scritto da: siam

Good for sharpening garden clippers.

While I have other knife sharpeners that run the blades through, they don't work with hand clippers and loppers. These, if I'm very careful to sharpen and not blunt the edges, work pretty well.

Scritto da: Elwood

Good, but don't last long

I like these little diamond stones a lot. Unfortunately, all of the diamonds wore off of the coarse stone within just a few weeks. The other two are holding up fine.

Scritto da: Osvaldo Cristo

It has an offset handle

I knew there are two versions for these files: one straight and another offset handle. Mine came with offset handle I prefer for odd angled sharpening. For beginners on that kind of product be aware these files will bear a break in process where the impression for a newcomer is they will lost their abrasive effectiveness. Do not be fouled by that "common sense" conclusion. It is normal after a short period the files looked dulled - but actually they aren't, that is their "normal" state. I recommend they for smaller sharpening needs as a small knife or tool.

Scritto da: Ladybug

Great for sharpening pruners and loppers.

I use these all the time for sharpening my gardening tools. There are three different "levels" of grit, from fine to coarse. I like that they're different colors. They are easy to hold and easy to move against the blade for sharpening. This is my second set, but my first set last a good long while--and I used them a lot.

Scritto da: Larry Jaques

A Second Set For Sis

Now I can finely hone all my sister's knives at her house. These things last forever and work extremely well. I prefer DMT over the other brands, as their grading is better and they change less from brand new to used.

Scritto da: LJP

I like DMT products

I like DMT products. Have three sets of these scattered about the house and shop. Hardest task for me is keeping each set together. Use a light touch, these are not carborundum tool stones.

Scritto da: Amazon Customer

Good touch-up sharpeners

See Paul Sellers U-tube on knife sharpening, items work as advertised.

Scritto da: R. Leonardo

Good!

Great for honing small tools such as snips and wire cutters.

Scritto da: Stenson L.

So far so good, I use frequently

So far so good, I use frequently. One of my coworkers uses the blue mini hone almost everyday, he has had this mini-hone for over 4 years! Buy this North American made product!!!!!! I use in a CNC machine shop, for Deburring parts and sharpening inserts for special applications.

Scritto da: AHC

Four Stars

Seem to work well on curved blades.