CURT 45018 Klassi 1 Karru Hitch Ball Mount, Taqbel 1-1/4-il pulzier Riċevitur, 2,000 lbs, 3/4-il pulzier Toqba, 1-1/4-in-waqgħa, 5/8-il pulzier Żieda, Gloss Iswed Trab Kisja

Name: CURT 45018 Klassi 1 Karru Hitch Ball Mount, Taqbel 1-1/4-il pulzier Riċevitur, 2,000 lbs, 3/4-il pulzier Toqba, 1-1/4-in-waqgħa, 5/8-il pulzier Żieda, Gloss Iswed Trab Kisja
Brand: CURT
SKU: 0612314002269
Availability: InStock

Brand:CURT

3.6/5

€

Il-muntaturi tal-ballun tal-klassi 1 CURT huma ddisinjati għal varjetà ta 'applikazzjonijiet ħfief tal-irmonk. Għal karrijiet bażiċi ta 'utilità, karrijiet bil-kenura u trejlers ħfief oħra, muntatura tal-ballun tal-klassi 1 tagħmel ix-xogħol. Il-muntaturi tal-ballun tal-klassi 1 CURT huma ddisinjati biex jikkumplimentaw l-irbit tal-karru tal-klassi 1 tagħna u jiġu f'diversi stili differenti, li joffru firxa ta 'tulijiet tax-xekkel u għażliet ta' waqgħa u żieda. Muntaġġ tal-ballun tal-klassi 1 huwa tipikament użat fuq karozzi kompatti, karozzi full-size, minivans u SUVs crossover, iżda jista 'jintuża prattikament fuq kwalunkwe hitch ta' karru b'tubu riċevitur 1-1/4 x 1-1/4 (NOTA: Qatt ma taqbeż il-kapaċità tal-piż l-aktar baxx ta 'kwalunkwe komponent tal-irmonk; jiġifieri l-vettura, l-irbit, il-karru, eċċ).Dan il-muntaġġ tal-ballun tal-klassi 1 għandu kapaċità ta' piż gross ta 'karru ta' 2,000 lbs. u kapaċità ta 'piż tal-ilsien ta' 200 lbs. Għandu tul ta '6-3/4, tnaqqis ta' 1-1/4 u żieda ta '5/8. Il-muntaturi tal-ballun CURT, bħall-irbit tal-karru tagħna, huma mibnija biex iservu. Huma magħmula minn azzar ta 'kwalità li huwa ffurmat b'CNC u wweldjat b'mod robotiku biex ikunu tajbin eżatt għall-irbit tar-riċevitur tiegħek. Biex nipproteġu l-muntaturi tal-ballun tal-klassi 1 tagħna mill-korrużjoni, ħsara mill-UV u grif, aħna niksi kull wieħed b'kisja ta 'trab ta' iswed tleqq għoli għal finitura li jaqtgħu.

Ammont

Żid mal-CART Ixtri issa

EAN: 0612314002269

Kategoriji Automotive, Aċċessorji ta 'barra, Prodotti tal-irmonk u Vinċijiet, Ball Mounts,

FAĊLI GĦALL-INSTALLAZZJONI. Biex tinstalla din il-muntatura tal-ballun tal-irbit tal-klassi 1 fuq il-vettura tiegħek, sempliċiment daħħal ix-xejk fir-riċevitur tal-irbit ta' 1-1/4 pulzier tal-vettura tiegħek. Il-qasba tond tagħmel l-installazzjoni faċli. Imbagħad, waħħal is-sank b'pin tal-hitch (mibjugħ separatament). REŻISTENTI GĦALL-KORRJONI. Għal użu fit-tul, dan l-irbit tal-ballun huwa protett b'finitura durabbli tal-kisja tat-trab iswed, li tirreżisti faċilment il-ħsara minn xita, ħmieġ, borra, melħ tat-triq u theddid korrużiv ieħor. LEST GĦALL-IRMONK. L-irbit tal-karru tiegħek huwa faċli b'dan il-muntaġġ tal-ballun 1-1/4. Hija karatteristika toqba ta '3/4-il pulzier biex taċċetta ballun ta' l-irbit tat-trejler b'qasba ta 'dijametru ta' 3/4-il pulzier (ballun tal-karru mibjugħ separatament). UŻU VERSATILI. Dan il-muntaġġ tal-ballun ta 'l-irbit tat-trejler jiġi b'xekkel ta' 1-1/4 pulzier x 1-1/4 pulzier biex jaqbel prattikament ma 'kwalunkwe riċevitur standard ta' 1-1/4 pulzier. Il-muntatura tal-ballun għandha wkoll qatra ta '1-1/4-il pulzier u żieda ta' 5/8-il pulzier biex tippromwovi l-irmonk tal-livell. QAWWA DIPENDABBLI. Dan l-irbit tal-ballun huwa mibni minn azzar b'saħħa għolja u huwa stmat li jirmonka sa 2,000 libbra piż gross tal-karru u 200 lira piż tal-ilsien (limitat għall-komponent tal-irmonk bl-inqas rata).

Brand	CURT
Brand	‎CURT
Country of Origin	‎USA
Customer Reviews	4.5 4.5 out of 5 stars 226 ratings 4.5 out of 5 stars
Finish Type	Gloss Black Powder Coat
Is Discontinued By Manufacturer	‎No
Item model number	‎45018
Item Weight	‎2.55 pounds
Manufacturer	‎Curt Manufacturing
Manufacturer Part Number	‎45018
Material	Carbon Steel
Model	‎45018
OEM Part Number	‎45018
Product Dimensions	‎10 x 2 x 2 inches
Vehicle Service Type	Car, Sport-Utility-Vehicles, Trailer

5 Star

4 Star

3 Star

2 Star

1 Star

Ikteb ir-reviżjoni tiegħek

L-email tiegħek mhux se tiġi ppubblikata. L-oqsma obbligatorji kollha huma mmarkati bi^*

Il-klassifikazzjoni tiegħek

Scritto da: Jacob Longworth

Paint makes it not fit in the receiver

As many others have said, the manufacturer did not use dimensionless paint on the finish, and the super thick paint it has makes the hitch not fit in a 1-1/4 receiver. you will need to do some sanding on the paint to get a good fit. i took off quite a bit of paint to get it to fit, and it still didn't expose any metal. there must be at least 1/8 inch of paint. its kind of crazy. the weld is a bit sloppy too, but it looks solid enough. lots of spatter and dingleberries (which is also coated in thick paint) so you may want to grind those off. the paint looks like pretty sturdy enamel paint. you get what you pay for though, its a cheap hitch with no frills. i will add that the metal coupon that has the ball hitch's hole is SUPER thick. i didn't notice it from the picture before i bought it, but its probably twice as thick as any other hitch i've ever seen. its so thick in fact, that i can't use it as a pin hitch receiver at all

Scritto da: B. C.

Very sturdy and works perfectly

I got this for my bike rack on the back of my travel trailer. It has the 1.25" receiver, and I just bolted the rack to the mount for easy on/off. For my purposes, it works great.

Scritto da: Ryan D

Ball Hitch

Great ball hitch for 4 wheeler

Scritto da: cBurgessc

Strong, well built but most of all, hollow which allows me to use the Curt Anti-Rattle kit for the bike rack!

I bought a CURT Class-II hitch for my wife's car as we needed something to haul our bikes. I had originally ordered a Curt Class-II mount for the this purpose. Big mistake. Well, maybe just an ordinary mistake. As far as I can tell, most Class-II mounts are solid and tend to fit loosely into the hitch. This causes the bikes on the rack to severely yaw back and forth like a pendulum. I would have sworn they were going to rip something off, safety strap be dammed. Easy fix? Yep! I picked up this Class-I mount (hollow) along with the Curt 2315 Anti-Rattle kit which comes with a nut on a sleeve that goes into the mount and then a threaded bold to tighten the mount to the hitch. Rock solid and zero yaw. It's now as solid as it was on my old Explorer's bumper mount. Would recommend, even for normal Class-I towing. ;-)

Scritto da: Jose Nova

needed persuasion

Item seems well built. Installed on 2004 Jeep Wrangler with Mopar class 1 receiver. The pin hole was not quite lining up. A 5 lb hammer was needed to get it back far enough to get the pin in. It does work.

Scritto da: Steve Danielson

Nice solid construction!

I should have gotten one with more drop but that' on me for not measuring better before I bought it. I bought a Curt 45027 (https://www.amazon.com/gp/product/B003AT8G3G/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1) to replace it. but the pin holes on that one were off center and could only be installed in the rise position, and I needed it for drop so I can't use it. Luckily I have this one, and since it is a small single axle trailer, the slight amount of extra tongue rise won't give me any trouble.

Scritto da: Tracy L

Nice hitch for gator

The paint was a little to thick to slide in. We just scraped off the paint and it was a perfect fit for the Gator front end. Just need to remember it's there so we don't keep walking into it. Nice and heavy should be able to get out of any situation we get ourselves into.

Scritto da: Brittany

Great Bang for your Buck

This hitch is definitely a great deal for your buck and pretty thick for the price too. I would definitely recommend it to others.

Scritto da: Charles Lesperance

Très solide

Je suis satisfait de cet achat

Scritto da: mustangdriver8555255

TOO BIG / WON'T FIT

It did not fit in my Reese hitch receiver. I had to grind it down and repaint it.