CURT 45007 Kmiem tal-Ilsien tal-Mounta tal-Boċċa tal-Karru Hitch, Taqbel ma' Wisa' ta' Ilsien ta' 2-1/2-il pulzier, Toqba ta' 1-il pulzier

Name: CURT 45007 Kmiem tal-Ilsien tal-Mounta tal-Boċċa tal-Karru Hitch, Taqbel ma' Wisa' ta' Ilsien ta' 2-1/2-il pulzier, Toqba ta' 1-il pulzier
Brand: CURT
SKU: 0612314450077
Availability: InStock

Brand:CURT

3.3/5

€

CURT joffri diversi tipi differenti ta 'muntaturi tal-ballun, mid-disinn standard għal heavy-duty għal muntaturi tal-ballun speċjali tagħna. Għal kull tip, noffru għażliet għad-daqs tal-qasba, it-tul, il-waqgħa, iż-żieda u aktar. Imma ma nieqfux hemm. Il-linja ta 'aċċessorji tal-muntaġġ tal-ballun CURT hija ġabra bir-reqqa ta' prodotti speċjali li huma ddisinjati biex jikkumplimentaw u jtejbu l-funzjoni tal-muntaġġ tal-ballun tiegħek. L-installazzjoni u t-torque ta 'ballun ta' karru fuq il-muntaġġ tal-ballun tiegħek jista 'jkun inkonvenjent kbir meta tkun qed tfittex li tibda l-vjaġġ tiegħek. Minflok ma tipprova timmaniġġja żewġ wrenches kull darba u żżomm il-ballun tal-karru fil-post waqt li ġġibu ssikkat, il-kmiem tal-ilsien tal-muntaġġ tal-ballun CURT jagħmel l-affarijiet aktar faċli. Il-kmiem tal-ilsien tal-muntaġġ tal-ballun jippermetti l-issikkar u t-torqueing b'ċavetta waħda ta 'ballun tal-karru. Dan l-aċċessorju tal-installazzjoni tal-muntaġġ tal-ballun sempliċiment joqgħod fuq il-pjattaforma tal-immuntar tal-muntaġġ tal-ballun tiegħek u jaċċetta ballun tal-karru, jżommu f'postu u jżommha milli ddawwar hekk kif tissikka l-iskorfina. Sempliċement ħalli l-muntatura tal-ballun tagħmel ix-xogħol! Il-kmiem tal-ilsien tal-muntaġġ tal-ballun CURT huwa ddisinjat għal 2 ball mounts b'2-1/2 ball mount ilsna u joqgħod għal blalen tal-karru wrench-flat biss.

Ammont

Żid mal-CART Ixtri issa

EAN: 0612314450077

Kategoriji Automotive, Aċċessorji ta 'barra, Prodotti tal-irmonk u Vinċijiet, Ball Mounts,

FAĊLI GĦALL-INSTALLAZZJONI. Biex tinstalla ballun tal-karru b'din il-kmiem tal-muntatura tal-ballun, sempliċement poġġiha fuq l-ilsien tal-muntatura tal-ballun. Imbagħad, daħħal il-ballun tal-karru fit-toqba tal-ballun ta '1 pulzier. REŻISTENTI GĦALL-KORRJONI. Għal protezzjoni fit-tul kontra l-elementi, dan l-aċċessorju tal-hitch ball jiġi b'finitura durabbli ta 'kisja tat-trab iswed. FIT STANDARD. Dan il-kmiem tal-ilsien tal-muntaġġ tal-ballun jista 'jwaħħal prattikament kull muntaġġ tal-ballun tal-irbit tal-karru b'ilsien wiesa' ta '2-1/2 pulzieri. VERSATILI. Din l-għodda ta 'installazzjoni tal-immuntar tal-ballun taqbel mal-biċċa l-kbira tal-blalen tal-karru CURT, kif ukoll ma' blalen tal-irmonk wrench-flat oħra. ISSIKAR ONE-WRENCH. Dan l-aċċessorju għall-installazzjoni tal-ballun tal-karru jippermettilek li tinstalla u ttorque ballun tal-karru fuq muntatura tal-ballun billi tuża wrench wieħed biss - mhux aktar fumbling b'żewġ wrenches!.

Brand	CURT
Brand	‎CURT
Country of Origin	‎USA
Customer Reviews	4.2 4.2 out of 5 stars 62 ratings 4.2 out of 5 stars
Exterior	‎Painted
Finish Type	GLOSS BLACK POWDER COAT
Is Discontinued By Manufacturer	‎No
Item model number	‎45007
Item Weight	0.58 Pounds
Item Weight	‎9.3 ounces
Manufacturer	‎Curt Manufacturing
Manufacturer Part Number	‎45007
Model	‎Ball Mount Sleeve
OEM Part Number	‎BKDK45007
Product Dimensions	‎8 x 7 x 5 inches
Vehicle Service Type	Trailer

5 Star

4 Star

3 Star

2 Star

1 Star

Ikteb ir-reviżjoni tiegħek

L-email tiegħek mhux se tiġi ppubblikata. L-oqsma obbligatorji kollha huma mmarkati bi^*

Il-klassifikazzjoni tiegħek

Scritto da: .

Not compatible with Curt Switch Ball Set (42225) shank

I purchased this for use with the Curt Switch Ball Set (42225) so that I could torque the shank without counterholding it with a wrench. Unfortunately, it doesn't fit, as it's meant for smaller wrench flats, seemingly 1-5/8". This information about the product should be included. It does appear to fit the tongue of a Curt 2" drawbar (45030) well, and is also said to be compatible with those having a locating pin.

Scritto da: Leonard

Looks like a good idea

Didn't fit because my drawbar was too wide. That's my fault for not checking.

Scritto da: Gus

Good fit on hitch

Sold with trailer build materials before I had a chance to use it.

Scritto da: Christopher T Barbour

Wish I had bought this sooner

I purchased this with the Curt 24178 1" shank switch ball set and Curt 45901 channel style adjustable ball mount. I had been having a problem with the ball shank spinning while trying to tighten the nut. This tongue sleeve solved the problem perfectly. This sleeve eliminates the need to carry two wrenches to flip the ball around on the mount. It's also cheaper than buying a 2nd wrench. I had no issues using this sleeve with those parts, unlike what other reviews suggested. Installing the sleeve spaces the ball up slightly, but the shank of my ball still had enough room to install a cotter pin for a bit of extra security. Minor complaints: The grove is wider than the base of my ball. Doesn't affect the functionality any, but it might provide a spot for grime to pool.

Scritto da: NJ.W

Well.....

I purchased and returned this item for two reasons. 1. This item will not allow the Curt Switch Ball with 1" shank to fit in its grove to be tightened. 2. I have always been impressed with look of Curt products....However, When I received this item, they were many manufacturing blemishies in the metal. (small nicks, cuts,) I know this was a manufacturing issue b/c the nicks and cuts were still painted in there groves. I could overlook the nicks and cuts, but they need to update the description about what actually fits as far as the ball itself.

Scritto da: Papa RC

It does not look nice but odds

I got this for a new CURT 45000 Class 2 Ball Mount. I contacted Curt directly if this would fit since it stated was for larger mounts. It did fit but was really little too big in my option but was able to make it work. It does not look nice but odds. See pictures .

Scritto da: cowboy7381

Great option to make taking the ball hitch on and off very easy.

Makes putting the ball on and off much easier. Now I can do it when it's on the vehicle instead of taking it off and putting it in a vice or trying to find the right tools for both sides.

Scritto da: waltbobjr

Now You Only Need One Wrench When Installing the Ball

Bought to use with CURT 45090 Hitch and Curt 40002 and 40004 Balls. Worked perfectly. The flats keep the ball from rotating as the hitch does not have any recess/tab to keep ball captive. Without the 45007 you will need two wrenches. Used on the 45090 in the "rise" position. Picked up the Curt 20001 ball wrench to make the tightening job straightforward and simple.

Scritto da: dido

dididodido

It is much needed as most hitches are pre-installed as a drop. But I needed a rise and they are not commonly found. This in combination with the Curt ball mount will allow for quick and secure installation of the hitch ball. Put your full body into tightening and that will be enough for it to be torque to the right amount.

Scritto da: Frederic Bergeron

Five Stars

Great.