Char-Broil Universal Fit Heat Tent Grill Parti

Name: Char-Broil Universal Fit Heat Tent Grill Parti
Brand: Char-Broil
SKU: 0047362972651
Availability: InStock

Brand:Char-Broil

3/5

€

Tenda tas-Sħana Fit Universali ddisinjata biex tipproteġi l-berners tal-grill tal-gass. Kompatibbli ma 'varjetà ta' gradi u mudelli li għandhom allinjament tal-berner minn quddiem għal wara jew allinjament tal-berner minn naħa għal oħra. Fih tinda waħda tas-sħana aġġustabbli bi 3 biċċiet, li tkopri grill burner wieħed. Char-Broil Universal Fit Heat Tent hija ddisinjata biex taqbel ma' bosta marki ta' grills tal-gass u tawwal il-ħajja tal-berners tal-grill tiegħek sabiex il-grill tiegħek idum l-istaġun kollu.

Ebda unitajiet disponibbli

EAN: 0047362972651

Kategoriji Patio, Lawn u Ġnien, Gradilji u Tisjir ta' Barra, Partijiet ta 'sostituzzjoni tat-tisjir ta' barra, Pjanċi tas-Sħana Grill,

Tinda waħda tas-sħana li tkopri grill burner wieħed. Ixtri 2 unitajiet għal grills 2-burner, jixtru 3 unitajiet għal 3-burner grills, jixtru 4 unitajiet għal 4-burner grills. Fih tinda tas-sħana waħda, li għandha disinn teleskopiku bi 3 biċċiet. Jipproteġi l-berners u jgħin biex iqassam is-sħana b'mod uniformi fi ħdan il-grill. Disinn durabbli, teleskopiku ta 'l-istainless steel se jaġġusta minn 12-il pulzier fit-tul għal 24-il pulzier fit-tul. Tinda tas-sħana universali adattata għall-użu ma 'grills tal-gass li għandhom berners ta' tubu jew bar-style.

Assembly Required	No
Brand	Char-Broil
Color	Stainless steel
Country of Origin	China
Customer Reviews	4.0 4.0 out of 5 stars 538 ratings 4.0 out of 5 stars
Frame Material	Stainless Steel
Fuel Type	Gas
Included Components	Universal Fit Heat Tent
Item Dimensions LxWxH	16.2 x 5.4 x 2 inches
Item model number	4797265R06
Item Weight	1.32 pounds
Manufacturer	Char-Broil
Material	Stainless Steel
Model Name	XL Stainless Steel
Product Dimensions	16.2 x 5.4 x 2 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Ikteb ir-reviżjoni tiegħek

L-email tiegħek mhux se tiġi ppubblikata. L-oqsma obbligatorji kollha huma mmarkati bi^*

Il-klassifikazzjoni tiegħek

Scritto da: R.Shaw

Great Product

For a 24" wide grill, you will need to crimp the edges for it to hold. I will spot weld it to firm it up.

Scritto da: Gussuk

Requires some work to fit properly

My application is about 23 inches. At that length it sags a lot in the middle. The folded crimps on the outer pieces are loose but crimping them tight with pliers it was still too loose and the sag in the center remained. I held it up flat and marked it with a pen. I had some stainless steel pop rivets left from another project so i drilled it and pop riveted it in place. This fixed the sag. Make sure it isn't too tight as it grows when heated and will buckle in the middle if it doesn't have room to expand.

Scritto da: Kakstis 1

Was a little short, but i made it work!

It was a little short on my grill but I pinched the crimps that hold it together and bent it a little bit to get it to stay

Scritto da: SLE

Worked for me

Slide it together for the right length. I used my old (rusted out) one as a guide. I had just a little trouble getting it back in my Char-Broil grill but not much. It just sits in place. I'll get a few more years out of my grill now.

Scritto da: George Sudduth

Had to adjust to fit

The problem is that the slide of the metal pieces when opened to a maximum fit fall apart easily

Scritto da: Rich

Hard to find 24" heat tent for old Char-Broil grill

Works as expected. Have used this item in the past. I have an old Char-Broil grill with a 23.5" heat tent holder. This tent can reach 24" as advertised but it will sag in the middle and almost touch the bar burner. As suggested in other reviews, tried to crimp the sliding groves to keep it level but this does not work. Could have used a couple of sheet metal screws (way to much bother) but found that a clay brickette used for even heating placed in the middle of the burner will raise the heat tent upward to make a level surface and still allow even heating by the burner. At 24" it's the only game in town for us old grillers!

Scritto da: ChrisMarg

Worked perfectly.

We thought it was a risk to purchase this part at the inexpensive price. We now get more even flame.

Scritto da: Marg Coulter

Disappointed and aggravated.

Was not compatible with my bbq even though it said it was. The grill kept knocking it off. The one I ordered said 12-28 inches but the box said 12-24” max. I needed 23 1/2” and it definitely did not fit - just kept falling apart. I will have to have one custom made I guess which will be costly. Would love feedback.

Scritto da: Mr Kieran Hayde

Not a great fit for the Char Broil 463720114

Can't comment on how it fits other models, but it's not right for the Char Broil 463720114 which is quite wide. It will just about fit, teetering on the edge, but it usually drops off during cooking or collapses in the middle. I can imagine it working better if it's not overstretched as it is for this model.

Scritto da: Marie Rutledge

Only one received not 4

In the write up it said 4 flavour bars and only one came. The write up was under the product. Where's the rest of them????

Scritto da: Amazon Customer

That you can't go wrong with it...

Like it can a just to the BBQ ...