Speakman S-1559 Alexandria Bathtub Spout mingħajr Diverter għal dekorazzjoni tal-kamra tal-banju stylish, Chrome illustrat

Name: Speakman S-1559 Alexandria Bathtub Spout mingħajr Diverter għal dekorazzjoni tal-kamra tal-banju stylish, Chrome illustrat
Brand: Speakman
SKU: 0671252090295
Availability: InStock

Brand:Speakman

3.4/5

€

DESKRIZZJONI TAL-PRODOTT Il-Speakman's Alexandria Tub Spout jippreżenta twist eclectic għal stil eleganti fil-kamra tal-banju. Il-kurvaturi graceful tal-ħardwer jirrappreżentaw disinn dettaljat li jirrifletti tħossok luxurious. Il-klassifikazzjoni ta' disinn tradizzjonali liberali; il-kollezzjoni tal-kamra tal-banju ta 'Lixandra tgħaqqad mal-Shoerheads ta' Alexandria u aċċessorji oħra tal-kamra tal-banju biex tiddistingwi eleganti fil-kamra tal-banju. MILL-MANIFATTUR Alexandria Tub Spout ta' Speakman jippreżenta twist eclectic għal stil eleganti fil-kamra tal-banju. Il-kurvaturi graceful tal-ħardwer jirrappreżentaw disinn dettaljat li jirrifletti tħossok luxurious. Il-klassifikazzjoni ta' disinn tradizzjonali liberali; il-kollezzjoni tal-kamra tal-banju ta 'Lixandra tgħaqqad mal-Shoerheads ta' Alexandria u aċċessorji oħra tal-kamra tal-banju biex tiddistingwi eleganti fil-kamra tal-banju.

Ammont

Żid mal-CART Ixtri issa

EAN: 0671252090295

Kategoriji Għodda u Titjib tad-Dar, Plumbing mhux maħdum, Partijiet tal-faucet, Sink & Bathtub Spouts,

SPEAKMAN PLUMBING: Mill-provvisti tal-plamers kummerċjali għal aċċessorji tal-kamra tal-banju biex tħobbhom, Speakman jagħti kwalità, innovazzjoni u prestazzjoni ma 'kull prodott. STYLE: L-ebda diverter għal disinn sleek żejjed. KONNESSJONIJIET: 1/2-il pulzier tar-ram slip-fit. KOSTRUZZJONI DURABBLI: Magħmula b'metall durabbli u finitura tal-kromju illustrat reżistenti għall-korrużjoni. DISINN ALEXANDRIA: Żid twist eclectic ma 'stil eleganti fil-kamra tal-banju bil-kurvaturi grazzjużi ta' disinn dettaljat li jirrifletti eleganti luxurious f'dan il-bejn tal-banju.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Speakman
Brand	‎Speakman
Color	Polished Chrome
Color	‎Polished Chrome
Customer Reviews	4.4 4.4 out of 5 stars 132 ratings 4.4 out of 5 stars
Finish	‎Polished
Finish Type	Polished
Finish Type	‎Polished
Handle Material	‎Copper
Handle Type	Lever
Handle Type	‎Lever
Included Components	Bathtub
Included Components	‎Bathtub
Installation Method	‎Widespread
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	‎6.09 x 3.13 x 3.13 inches
Item model number	‎S-1559
Item Package Quantity	‎1
Item Weight	‎1.1 Pounds
Item Weight	‎1.11 pounds
Manufacturer	‎Speakman Company
Material	Metal
Material	‎Metal
Mounting Type	Deck Mount
Mounting Type	‎Deck Mount
Number of Handles	1
Number of Handles	‎1
Number Of Holes	1
Number Of Holes	‎1
Part Number	‎S-1559
Product Dimensions	‎6.09 x 3.13 x 3.13 inches
Style	Traditional
Style	‎Traditional

5 Star

4 Star

3 Star

2 Star

1 Star

Ikteb ir-reviżjoni tiegħek

L-email tiegħek mhux se tiġi ppubblikata. L-oqsma obbligatorji kollha huma mmarkati bi^*

Il-klassifikazzjoni tiegħek

Scritto da: Subman

Beautiful quality and finish

This is a beautiful spout. Very heavy and set up to take a straight piece of 1/2" copper tubing between 1 1/2 and 3" long out of the wall. It secures with a screw on the bottom. There's a small o-ring in the spout that, hopefully, seals so water doesn't come back and drain out the screw hole on the bottom. Make sure the pipe is nice and clean and smooth. Use some Scotch Brite pads and grease the o-ring.

Scritto da: ChrisM

Pretty good overall, but don't expect a flawless finish

First off, this thing is big. If you don't have an application that requires a big, long spout, this is probably not a good choice for you. I did need one because I have a large soaker tub with a wide rim and a wall mounted faucet. It was really tough to find a long wall mounted spout that wasn't really expensive. I also wanted one without a diverter, but that just wasn't going to happen, so I settled on this one and just removed the diverter. The spout itself is pretty solid and installation was easy. You can install it in three ways: 1) with a short MPT stub, 2) with a long MTP stub, or 3) with a o-ring-sealed slip fit. My only complaint is that the quality of the finish is not great. There are visible cross-hatch marks in the finish. It's not scratched (if it was I would have returned it for a replacement). It appears to be just the way these are made - the metal is not getting polished to a sufficient degree. Unless you're a perfectionist like me, this probably won't bother you, but I wanted to mention it.

Scritto da: mike

Not as easy to slide on as one would think.

This is a really attractive spout that replaced our 40 year old spout. I didn't realize how easy it is to upgrade bath fixtures. Until I tried to slide it onto the copper pipe. The pipe is 1/2", which shouldn't be a problem. But, after loosening the interior screw, I had to sand the pipe and really coax the spout on. In putting it on and off, the interior pieces all fell out, which took a while for me to figure out how to put them back together in the right order. Because it was so tight, it was hard to get the spout flush against the tile. I am fine with small gap b/c the spout is so pretty.

Scritto da: Wilber

Moen makes the best one for most of their tub spouts that clamps ...

The only issue I have with this spout is the set screw that secures it to the copper. It's the same system that 90% of the slip-fit tub spouts use. It has an allen set screw that seats against the copper. If someone gets it too tight then it will cause a leak, sometimes not right away, but eventually. I've fixed many copper stub-outs in my time as a plumber. Moen makes the best one for most of their tub spouts that clamps around the pipe rather a set screw. I wish others would do this, too. So be warned that if you over-tighten this spout it will damage the copper and cause a leak. Be careful! Never try and spin the spout with the set screw tightened down, always line the spout where you want it and then snug the set screw to the copper.

Scritto da: Kindle Customer

Looks just like photo. Works great with older plumbing, easily installed with no sharp corners

I purchased this for our bathroom because we wanted something less square without hard edges that might rust. Our previous one was more than 30 years old and looked it. Our plumber put this one it in in a few minutes. There was nothing extra needed. In fact, he liked it so much, he took down the information to recommend it to others. We have had it a few weeks now and it looks great. We have had a lot of compliments on it. It looks like a million bucks and there are no sharp edges to cause a cut if a child falls or pulls up under it. It fit our very old house plumbing and holes with no issues and matches our sink’s round spout perfectly.

Scritto da: Joann

Nice but

Really nice looking & heavy spout. Unfortunately it wouldn't work for me so I had to sadly return.

Scritto da: RSV

Its Slip on.. not Screw on

Pretty easy to install. My old set up was Screw on so I used my tube cutter to cut pipe down to 2 3/4 inches from the wall ( instructions say no more than 3 inches long) used some steel wool to clean the crud off the pipe. All went well from there, when the rubber grommet seal gets to the pipe it gets somewhat tighter (as it should). Then line it up and then tighten the set screw. Do not over tighten and do not try to twist when tight, this may cause the pipe to leak later.

Scritto da: Kelly

Surprisingly high quality

Surprisingly high quality materials. Definitely recommend. Very impressed

Scritto da: Avid Reader

Looks Great

The faucet is solid and looks exactly as planned. Installation took 15 minutes.