Slide-Co N 163138 Bieb li jiżżerżaq tond Iġbed (2pk) – Azzar ittimbrat b'finitura tar-ram – Taqbel b'dijametru ta' 1-3/4” toqob tas-swaba tal-bibien tal-closet tal-closet – Disinn Universali – Faċli biex tinstalla, Ħardwer Inkluż

Brand:Slide-Co

3.6/5

DESKRIZZJONI TAL-PRODOTT Meta l-ġbid tas-saba 'fuq bieb tal-armarju jkunu neqsin jew bil-ħsara, mhux biss huwa diffiċli biex jinfetaħ, huwa unsightly ukoll. Bil-Round Finger Pull ta 'Prime-Line, tista' malajr u faċilment tinstalla waħda ġdida fjamanta! Il-ġibda tal-bieb hija mibnija minn azzar stampat durabbli b'finitura tar-ram. Użat minn ħafna manifatturi tal-bibien tal-closet fuq sistemi bi-pass tal-bibien, il-ġbid tas-swaba 'tqabbel il-ħardwer eżistenti fuq il-xawer madwar id-dar tiegħek. Il-ġibda tal-closet tal-azzar ittimbrat hija kompatibbli mal-bibien tal-wardrobe tal-bypass ¾ "sa 1-3/4" ħoxnin. L-installazzjoni hija ta 'malajr u faċli bil-hardware kollu inkluż. Il-ġibdiet tal-bieb joqogħdu 1-3/4” mortise fil-bieb tal-closet u jinżammu f'posthom b'żewġ imsiemer żgħar. Meta immuntat flush, huwa 2” fid-dijametru. Kull pakkett jinkludi żewġ pulls ta 'bibien li jiżżerżqu u erba' imsiemer. MILL-MANIFATTUR Dan il-manku tal-ġibda tal-bieb tal-gwardarobba huwa mibni mill-azzar u jiġi lest fir-ram. Hija karatteristiċi dijametru 1-3/4 pulzieri u huwa faċilment stabbilit fil-post b'2 imsiemer inklużi. Dan il-manku tal-istil huwa użat minn ħafna manifatturi tal-bibien tal-gwardarobba.

Għall-informazzjoni dimensjonali kollha jekk jogħġbok irreferi għall-arti tal-linja u qabbel mal-bżonnijiet tiegħek qabel tixtri. GĦAL BIBIEN TAL-GARDROBA BI-PASS - Il-ġibda tal-wardrobe tal-azzar ittimbrat hija kompatibbli mal-bibien tal-gwardarobbi bi-pass ¾ "sa 1-3/4" ħoxnin. INSTALLAZZJONI FAĊLI - L-installazzjoni hija ta 'malajr u faċli bil-hardware kollu inkluż. Il-ġibdiet tal-bieb joqogħdu 1-3/4” mortise fil-bieb tal-closet. Il-ġibda tinżamm f'postha minn żewġ imsiemer żgħar. Meta immuntat flush, huwa 2” fid-dijametru. DISINN UNIVERSALI - Użat minn ħafna manifatturi tal-bibien tal-closet fuq sistemi tal-bibien tal-bypass, il-ġibda tas-swaba 'tqabbel mal-ħardwer eżistenti fuq il-xawer madwar id-dar tiegħek. JINKLUDI - Kull pakkett jinkludi żewġ bibien li jiżżerżqu u erba 'imsiemer. Kull ġibda tinżamm f'postha b'żewġ imsiemer. IBID IL-GATTA TAL-BIEB TAL-CLOSET - Ibdel faċilment ġibda tal-bieb tal-closet bil-ħsara jew nieqsa bil-ġibda tas-swaba 'tonda ta' Prime-Line. Il-ġibda hija mibnija minn azzar ittimbrat b'finitura tar-ram.
Batteries Included? ‎No
Batteries Required? ‎No
Brand Slide-Co
Brand ‎Slide-Co
Color Brass
Color ‎Brass
Customer Reviews 4.5 4.5 out of 5 stars 593 ratings 4.5 out of 5 stars
Exterior Finish Brass
Exterior Finish ‎Brass
Finish ‎Brass
Finish Type ‎Brass
Handle Material ‎Alloy Steel, Brass
Handle Type ‎Pull Handle
Is Discontinued By Manufacturer ‎No
Item model number ‎163138
Item Package Quantity ‎1
Item Weight ‎0.8 ounces
Manufacturer ‎Slide-Co
Material Steel
Material ‎Steel
Metal Type ‎Brass
Number of Items ‎1
Part Number ‎163138
Product Dimensions 0.31"L x 1.75"W
Product Dimensions ‎0.31"L x 1.75"W
Product Dimensions ‎1.75 x 1.75 x 1.75 inches
Shape ‎Round
Size ‎1-3/4 in.
Warranty Description ‎Goods are warranted against manufacturing defects for 1 year. In no case is ime-Line responsible for user related damage or damage incurred during installation. Warranty is void if oducts are subjected to abnormal conditions, misapplication or abuse.

3.6

11 Review
5 Star
76
4 Star
12
3 Star
6
2 Star
3
1 Star
3

Ikteb ir-reviżjoni tiegħek

L-email tiegħek mhux se tiġi ppubblikata. L-oqsma obbligatorji kollha huma mmarkati bi*

Scritto da: Maria Keith
Perfect fit
Fits the opening perfectly, nice update from ugly brass ones
Scritto da: HELP ME, HELP YOU!
Perfect Size & Shape
It's not that easy to find something like so I must give this a five star. It even WORKS with magnets so that's just the icing on the cake! IF you're the creative type you'd know what I mean.
Scritto da: WW
Hard to find size in stores
I took on the unenviable task of refinishing, recycling some old oak wood closet doors for our house. I've been doing this type of work for around 15 years. I went to the local home improvement stores and found these round finger pulls to fit in the existing spaces (filled with rotted out plastic pulls). It was a mistake that's very uncommon for me. I didn't even realize these come in different sizes. The ones I bought were over 2" and wouldn't even try to fit in the existing spaces. Came here to Amazon and there they are, the 1 3/4" satin nickel pulls. Price was quite a bit higher than buying the standard (in 2016) size, but I wanted to keep the doors as authentic as possible. Turned out to be a great buy. The spaces measured 1 3/4", but with existing rotted plastic, I had to pry out the old pieces and even then, these 1 3/4" pulls were a very snug fit. If I could give you any installation advice it would be to try and get one piece into the space then start pushing. They popped in well and are very snug. I'm guessing someone 50 years now will be cursing me as they try to resurface, recycle the doors. We bought a total of 10 and all 10 worked very well, no inconsistencies between them.
Scritto da: GWM
Nice Door Pull, but product information is incorrect.
This is a nice quality steel door pull with a classy antique bronze finish. My wardrobe closet door now looks much nicer as I replaced two decades-old, cheap plastic door pulls with these and the difference in the look of the door is night and day. They really class up the look of my wardrobe closet door! However, I must point out that the product information in both the Amazon listing and the actual product packaging is incorrect. The product information states "Includes 2 Pull Handles and 4 Nails" and "Sets in place with 2 included nails". This is incorrect as no nails are included in the package nor are there nail holes in the door pulls to insert the nails through. This did not end up being an issue with me as the door pulls friction-fit tightly into the closet door holes and therefore nails were not needed. However, this may not be the case for others who purchase these so the product information should be corrected immediately.
Scritto da: Mrs.C.
Nice replacement
Looks way better than the tan plastic ones that were in the doors originally. Didn't have the strength to push them in so I had to use a wood block and hammer to pound them in (I don't own a rubber mallet). They should stay put and and function as intended.
Scritto da: Casey B
Easy to install - just pop them in place and you’re done!
Looks great and very easy to install. This was a simple repair/update that cost less than $6 and took about 5 minutes to do. The sliding closet doors in our guest room had cheap plastic door pulls that were covered in paint. I pried out the old door pulls with a screwdriver and removed the glue underneath. Then I just popped in the new door pulls. They don’t have nails to secure them; There are a few small raised indents around the edge to hold the pulls in place. They are fairly snug, but I’m going to add a little glue underneath to make sure they stay in place. I was so happy with these that I immediately ordered another set for my daughter’s closet.
Scritto da: TodPkg
I did my best to center them in the hole
These Finger Pulls were used to update sliding closet doors in a bathroom. They were the same size as the Finger Pulls that they replaced. I thought that I was going to have a problem installing them because they seemed quite tight. I did my best to center them in the hole, but they would barely seat down into it - maybe only 1/16". Another reviewer suggested using a dish towel and a rubber mallet. That did the trick, except 6 or 7 fibers from the dish towel became trapped under the rim which had been "sealed" against the closet door - I had to carefully cut them away so that they didn't show. For the last two handles to be installed I switched to a dry DISH CLOTH (not dish towel). No fibers were trapped under the rim this time, and the finish of the Finger Pull was not marred either.
Scritto da: Quintster
Nice choice for sure!
Perfect size and just the right color for the sliding doors we installed in our closets. Could not be more pleased with the quality either. You will need a hole saw bit for your drill to make the holes obviously so make sure you order one of those, too! We put them on both the inside and outside of the door. I was just going to do exterior since they are closet doors and not like a bathroom pocket door. My wife wanted both sides done and she was right, of course. Easy grip to close from inside.
Scritto da: Ken L.
Great product
This is a great product. Good quality and it was shipped and received very quickly.
Scritto da: T. Odishaw
Happy
Used for sliding closet doors. installed well and seem to be doing the job. I would order them again. No issues with product or delivery time.
Scritto da: Bonjour
Poignée portes coulissante
Ces poignées s’agence bien

Prodotti relatati

Skopri n-netwerk internazzjonali tagħna

Nibgħatu lejn 28 pajjiż, aktar minn 200,000 prodott. Ibqa' aġġornat, abbona man-newsletter.

Array