SharkBite U860R50 PEX Pajp 1/2 Pulzier, Aħmar, Tubi Flessibbli tal-Pajpijiet tal-Ilma, Ilma tax-Xorb, Fittings tal-Plaming li Push-to-Connect, Kolja ta' 50 pied tal-pajpijiet Aħmar 1/2 Pulzier Kolja ta' 50 pied

Name: SharkBite U860R50 PEX Pajp 1/2 Pulzier, Aħmar, Tubi Flessibbli tal-Pajpijiet tal-Ilma, Ilma tax-Xorb, Fittings tal-Plaming li Push-to-Connect, Kolja ta' 50 pied tal-pajpijiet Aħmar 1/2 Pulzier Kolja ta' 50 pied
Brand: SharkBite
SKU: 0697285240186
Availability: InStock

Brand:SharkBite

3.8/5

€

SharkBite PEX Tubing huwa prodott ta 'tubi ta' pajpijiet ta 'l-ilma flessibbli eċċellenti għal sistemi ta' plumbing u idroniċi bi fluss superjuri. It-tubi PEX huma flessibbli, faċli biex jiġu installati, u jimminimizzaw il-ħoss ikkawżat minn martell tal-ilma. Iddisinjati għall-użu fuq linji ta 'ilma tax-xorb sħun u kiesaħ, tubi Red PEX huwa komunement użat għal linji ta' ilma sħun għal skopijiet ta 'identifikazzjoni. QATGĦA. IMBOTTA. MAGĦMUL. Is-Sistema ta 'Konnessjoni SharkBite tagħmel kwalunkwe proġett ta' plaming veloċi u faċli grazzi għal teknoloġija pushfit unika ta' konnessjoni rapida. Meta daħħal pajp f'fitting ta' konnessjoni mgħaġġla SharkBite, is-snien tal-istainless steel tal-fitting jigdmu u jaqbdu l-pajp, filwaqt li l-O-ring speċjali tiegħu jikkompressa biex joħloq siġill li ma jgħaddix ilma minnu.

Ammont

Żid mal-CART Ixtri issa

EAN: 0697285240186

Kategoriji Għodda u Titjib tad-Dar, Plumbing mhux maħdum, Pajpijiet, Fittings tal-pajpijiet u Aċċessorji, Fittings tal-pajpijiet,

MAGĦMULA FL-Istati Uniti: Il-konnetturi, l-adapters u l-pajpijiet kollha SharkBite huma manifatturati u ttestjati fl-Istati Uniti. IPPREFERUT MILL-PRO: It-tubi kollha ta 'SharkBite PEX jissodisfaw l-istess standards għal applikazzjonijiet ta' plumbing kummerċjali u residenzjali; Il-pajp PEX huwa kbir għat-tiswijiet, u faċli biex tinqata 'b'sharkBite shears. PUSH-TO-CONNECT: Uża ma 'fittings ta' plumbing push-to-connect SharkBite jew fittings tal-barb tar-ram bl-użu ta 'għodda ta' crimp PEX jew konnessjonijiet tal-morsa. PIPE PEX FLESSIBBLI: Il-linja tespandi u tikkuntratta b'bidliet fit-temperatura u hija reżistenti għall-iffriżar. PEX TUBING: Tubi tal-pajpijiet tal-ilma flessibbli għal sistemi ta 'distribuzzjoni tal-ilma tax-xorb; reżistenti għall-klorin u UV; temperatura minima tax-xogħol 33 grad Fahrenheit f'160 PSI u temperatura massima tax-xogħol 200 grad Fahrenheit f'80 PSI.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	SharkBite
Brand	‎SharkBite
Certification	‎CSA, NSF, ASTM F877, ASTM F876, ASTM
Color	Red
Color	‎Red
Country of Origin	‎China
Customer Reviews	4.7 4.7 out of 5 stars 5,663 ratings 4.7 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Included Components	‎PEX coil tubing
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Item Dimensions LxWxH	23.5 x 23.5 x 2.5 inches
Item Dimensions LxWxH	‎23.5 x 23.5 x 2.5 inches
Item model number	‎PEX Tubing
Item Package Quantity	‎1
Item Weight	2.73 Pounds
Item Weight	‎2.73 Pounds
Manufacturer	‎Cash Acme
Material	Plastic
Material	‎Plastic
Maximum Pressure	160 Pound per Square Inch
Maximum Pressure	‎160 Pound per Square Inch
Measurement System	‎Inch
Nominal Wall Thickness	0.5 inch
Nominal Wall Thickness	‎0.5 inch
Part Number	‎U860R50
Pattern	‎Pipe
Product Dimensions	‎23.5 x 23.5 x 2.5 inches
Size	‎1/2 Inch
Style	‎50 Foot Coil

5 Star

4 Star

3 Star

2 Star

1 Star

Ikteb ir-reviżjoni tiegħek

L-email tiegħek mhux se tiġi ppubblikata. L-oqsma obbligatorji kollha huma mmarkati bi^*

Il-klassifikazzjoni tiegħek

Scritto da: Amazon Customer

Frozen Copper Elbow

I never repaired copper pipes before. I discovered a small crack located in a copper elbow fitting in the crawl space. Pipe was frozen. I turned off water at the well, pushed the black button on the Big Blue filter to let out air and water and opened up all the faucets to drain them. I read everything I could quickly. The shark bite 1/2 inch pex tubing came very fast, thank God! I didn't have water... Amazon saved me again. So, I ordered a cool Loreso mini copper pipe tubing cutter for about 10.00 another absolute must have and it cut this blue sharkbite pex perfectly half inch. It also cuts copper great. I ordered 2 of the 1/2 inch Eifield elbow copper connectors (8.00 approx) and ruined both by getting too pipe cutting happy by trying to recycle another pipe from an old water heater for the repair. Short story and lesson learned, this shark bite 1/2 inch pex tubing curved in a sort of square U nicely I joined the ends to the existing 2 copper pipes with another set of Eifield 1/2 inch elbows that I had to order but this time I ordered 6 at about 25.00 to have on hand. I would have ordered the shark bite elbows but they were not going to be delivered next day. I was pleasantly surprised all around. There is teethe inside the shark bite and Eifield copper elbow connectors that grip on pex or copper tubing so when you use the copper connectors to connect this blue pex push hard in then pull out to make sure the teeth gripped on to this blue pex and or copper tubing. There is no need to ever solder copper again or worry about firing up a torch in close proximity to flammables. Blue pex tubing does not freeze apparently. Buying this may save you later. I used about 8 inches of this total and hope to change out more copper to this blue 1/2 in sharkbite pex in time.

Scritto da: Tirra

Very poor item description.

The outside and inside diameter measurements for this tubing needs to be made MUCH clearer in the product listing. I first bought the 1/2" tubing because one of the photos for it indicated that it was the OD that was 1/2". Not true. The OD was about 11/16. It was the ID that was 1/2". Had to go to the trouble of returning that order and ordering the 3/8" tubing, which is 1/2" OD and 3/8 ID. So, just some helpful advice to the seller: Do you enjoy having a lot of these tubing orders returned to you? If not, then you really should make the ID and OD measurements for each size tubing MUCH for clear. Yes, I realize now that it is stated in small print, WAY down in the lising description, but there would be almost no confusion at all if you made it an obvious part of the products advertisement header.

Scritto da: Tim L

Worked as should

Price was great, and worked as it should, but if i had to do over again, i would not have ordered rolls, i had a lot of short pieces and being rolled up made it a little difficult to work with, but it is in no way a defect, its just the nature of it being rolled up, just had to straighten each piece before install, over all i was happy with this product,

Scritto da: Carl Deal

Great value!

I ran this Pex from my home to my shop as conduit for my fiber optic cable. Worked fantastic!

Scritto da: DrB

PEX fitings and valves are a great solution for plumbing in many instances.

PEX fitings and valves are a great solution for plumbing in many instances. There are many sizes and types of PEX fittings, and fixtures available.

Scritto da: Bookman

Better than cpvc or pvc

This stuff is great. Much easier to conform to the area you are working on. I've had to replace 80% of our under-cabin plumbing due to raccoons. I use PUSHFIT connectors and T's to really speed up the process. No waiting for glue to dry. This took me five days a few years ago when we had a raccoon problem. With this I got it done in one day. Forget PVC and CPVC. This is cheaper and way easier to use. Highly recommend. Not paid or working for them, just a consumer.

Scritto da: milo hetzel

cheap and easy fix

easy to install. not super strong and can be easily damaged. meets local codes. has some flexibility to avoid 90 degree joiners in some non-tight situations. works well with push in fittings to avoid $100+hr. plumbing charges. watch some youtube videos if you haven't used it before.

Scritto da: Joe G

Good

Works surprisingly well.

Scritto da: Niatros

works

works

Scritto da: Tony Roussy

Simplement parfait

Utilisation dans un chalet en remplacement du cuivre. Très maléable, facile à plier et à couper Aucune fuite et s’adapte parfaitement aux différents raccords. Je recommande

Scritto da: Amazon Customer

Timely arrival

In floor heating.....timely arrival....

Scritto da: Karl Barrett

Was available

Product was cheaper and available

Scritto da: Nick

Excellent product

Product is exactly are described and has good quality to it. Had to use a heat gun to straighten out the tubes due to the nature of shipping them curled. Took minimal effort and the product holds the new shape once cooled.