SharkBite 1/2 Pulzier MNPT Adapter, Imbotta biex Tqabbad Brass Plumbing Fitting, Pajp PEX, Ram, CPVC, PE-RT, HDPE, U120LFA 1/2 pulzieri.

Name: SharkBite 1/2 Pulzier MNPT Adapter, Imbotta biex Tqabbad Brass Plumbing Fitting, Pajp PEX, Ram, CPVC, PE-RT, HDPE, U120LFA 1/2 pulzieri.
Brand: SharkBite
SKU: 0697285465763
Availability: InStock

Brand:SharkBite

3.7/5

€

DESKRIZZJONI TAL-PRODOTT Issimplifika l-bżonnijiet tal-plaming tiegħek bis-SharkBite Push to Connect MNPT Male Adapter. Magħmul minn ram durabbli mingħajr ċomb u li fih disinn ta 'fluss sħiħ għal produzzjoni massima ta' ilma, it-tagħmir SharkBite jista 'jintuża ma' kwalunkwe kombinazzjoni ta 'pajpijiet tar-ram, PEX, CPVC, jew PE-RT, u għandhom disinn faċli biex jgħaqqad biex jippermetti għal installazzjoni ta 'malajr. L-ebda crimping, kolla, issaldjar jew għodda mhuma meħtieġa, sempliċement daħħal il-pajp u s-snien tal-istainless steel gidma 'l isfel u qabda sewwa, filwaqt li O-ring ifformulat apposta jikkompressa biex joħloq siġill perfett. L-adapter MNPT jista 'jiġi żarmat faċilment bl-użu ta' għodda ta 'skonnettjar sabiex it-tagħmir u l-valvi jkunu jistgħu jinbidlu u jerġgħu jintużaw faċilment (għodda Skonnettja mhux inkluża). It-twaħħil MNPT jista 'saħansitra jiġi mdawwar wara l-assemblaġġ biex jippermetti installazzjoni aktar faċli fi spazji stretti. Dan it-twaħħil tal-plaming MNPT huwa ġonta manifatturata ċċertifikata li tista 'tiġi installata f'linji mxarrba, u kemm għal applikazzjonijiet taħt l-art kif ukoll wara l-ħajt. L-adapter MNPT push to connect huwa stmat għal 200 psi u 200 grad F, u jiġi b'garanzija ta '25 sena. MILL-MANIFATTUR SharkBite hija s-sistema ta' konnessjoni push-fit li verament qed tieħu. Huwa l-eħfef mod biex tgħaqqad pajp tar-ram, CPVC jew PEX fi kwalunkwe kombinazzjoni - mingħajr l-ebda issaldjar, klampi, unions jew kolla. Daħħal biss il-pajp u s-snien tal-istainless steel bite down u qabda ssikkata, filwaqt li O-ring ifformulat apposta jikkompressa biex joħloq siġill perfett. Iż-żarmar huwa daqstant mgħaġġel billi tuża l-għodda sempliċi ta 'skonnettjar. Allura fittings u valvi jistgħu jinbidlu u jerġgħu jintużaw faċilment. Jistgħu anke jiġu mdawra wara l-assemblaġġ għal installazzjoni aktar faċli fi spazji stretti. Ikseb SharkBite, u aqbad il-proġett tal-plaming li jmiss tiegħek. Dawn il-fittings huma mingħajr ċomb u jissodisfaw ir-rekwiżiti kollha għall-plaming f'Kalifornja u Vermont.

Ammont

Żid mal-CART Ixtri issa

EAN: 0697285465763

Kategoriji Għodda u Titjib tad-Dar, Plumbing mhux maħdum, Pajpijiet, Fittings tal-pajpijiet u Aċċessorji, Fittings tal-pajpijiet,

ĊERTIFIKAT: It-twaħħil MNPT huwa ċċertifikat bħala ġonta manifatturat, u jista 'jintuża għal applikazzjonijiet taħt l-art u wara l-ħajt mingħajr pannelli ta' aċċess; ratata għal 200 psi u 200 grad F. DURABLE: It-twaħħil huwa mingħajr ċomb u reżistenti għall-korrużjoni għal durabilità u affidabilità fit-tul. KOMPATIBBLI MA SPAZZJIET IŻSIQ: It-twaħħil tar-ram jista 'jidawwar faċilment fuq il-pajp wara l-installazzjoni għall-użu fi spazji stretti. FAĊLI GĦALL-UŻU: Konnettur dritta għandu disinn innovattiv push-to-connect jippermetti installazzjoni malajr u faċli; ebda għodda, issaldjar, crimping jew kolla meħtieġa. TWAĦĦIL MALE BRASS: It-twaħħil maskili jista 'jintuża biex jgħaqqad ma' kwalunkwe kombinazzjoni ta 'pajpijiet tar-ram, PEX, CPVC, jew PE-RT; jista 'jintuża għal linji mxarrba.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	SharkBite
Brand	‎SharkBite
Color	Brass
Color	‎Brass
Connector Type	Adapter
Connector Type	‎Adapter
Country of Origin	‎China
Customer Reviews	4.7 4.7 out of 5 stars 2,944 ratings 4.7 out of 5 stars
Exterior Finish	Brass
Exterior Finish	‎Brass
Finish	‎Brass
Included Components	‎Fitting
Installation Method	‎SharkBite Push-To-Connect
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	10.75 x 4 x 6.25 inches
Item Dimensions LxWxH	‎10.75 x 4 x 6.25 inches
Item model number	‎U120LFA
Item Package Quantity	‎1
Item Weight	0.1 Pounds
Item Weight	‎0.1 Pounds
Item Weight	‎1.6 ounces
Manufacturer	‎Cash Acme
Material	Brass
Material	‎Brass
Measurement System	‎Inch
Number Of Pieces	2
Number Of Pieces	‎2
Part Number	‎U120LFA
Product Dimensions	‎10.75 x 4 x 6.25 inches
Size	1/2 in.
Size	‎1/2 in.
Style	‎Brass Push Male Adapter
Thread Type	NPT
Thread Type	‎NPT
Warranty Description	‎Lifetime

5 Star

4 Star

3 Star

2 Star

1 Star

Ikteb ir-reviżjoni tiegħek

L-email tiegħek mhux se tiġi ppubblikata. L-oqsma obbligatorji kollha huma mmarkati bi^*

Il-klassifikazzjoni tiegħek

Scritto da: AmazoCedric

The Amazing Sharkbite 1-1/4 connector fitting

This fitting is the answer to replacing the unreliable ugly boot coupling for smooth copper pipes coming out the wall. This is the the answer for older homes with copper pipes. Tight fit over the copper pipe with no leaks. Sharkbite a friend for life.

Scritto da: Wendy Chan

It works!

Easy to install and very solid connection. It serve the purpose.

Scritto da: John

Quality

Excellent product

Scritto da: Veetuch

Easy to use

Love using Shark Bite connectors, especially when I have to do connections inside the rafters. No soldering with a torch and these are simple push onto your pipe and they stay in place. Good quality material and no leaking. Recommended them for your project.

Scritto da: Anonimo

Initially concerned....

Not gonna lie. When I first got these I was concerned about leaks and waking up to my basement flooding as I had never used them. I'm used to either brazing copper pipes or priming and gluing pvc tubing. I'm a bit of a control guy and when I moved into my house years ago had ripped out the horror that was the tubing entering my basement from the well pump.. put in a whole house filter, pressure tank, other, removable filters and carbon filters, water softener etc. After years of use the softener had given up and the mechanisms sprung leaks all over. I wanted to take that out and instead put in an iron removing filter as our sinks and toilets need constant scrubbing with some of our lighter clothes becoming "work on the car" items due to staining. I read a lot of reviews here and elsewhere about the sharkbite connectors and wound up ordering them.. heck, they were returning so why not? I cut cpvc to length and put connected everything with sharkbite elbows, reducers, and a valves. Once I slipped everything together, crossed my fingers and opened up the water. Hmm,.. so far so good but lets wait and see.. turned on the water throughout the house and watched everything pop and shake as air bled out of the system and pressurized to 70psi. Okay.. so far so good. Cleaned up and went upstairs to eat.. came back down checking for leaks... went to watch tv (The Boys-started slow but ROCKS)... wife and I took turns checking for leaks. Went to bed... got up a few times... and now it's been a few weeks. Not a drop of water and none of the pipes has tried to slip out as we have them all marked for this purpose. These things rock! One of the things I like best is that you can rotate the fittings (ie; the pipes can still move, rotate etc) without leaks which means it's all super forgiving if you get your lengths slightly off and stuff is not 100% straight and true.. it adjusts.. something PVC and Copper do NOT do... and I can also move stuff around a few inches if needed without cutting/de-brazing pipes etc. I'm a convert!

Scritto da: Reality Check

This fitting really saved the day

I had to change out a tub valve through a tiny 7 inch round opening . This fitting had 4 pipes: A hot and cold PEX, a PEX running to the shower, and a hard copper line running to the tub spout. All fittings were iron pipe thread into the valve. The PEX fittings will slip and rotate (with some difficulty) so I was able to unscrew them, and I was barely able to fit a mini tubing cutter around the copper to cut it. That's where this SharkBite fitting came in. With a bit of delicate attention to the end of the copper to make sure that it wasn't sharp, this fitting slid right over the copper and allowed me to tighten it into the valve body. Everything lined up like before and nothing leaked. This took all day, but that was due to the tiny opening that i had to work through. This SharkBite was the easiest to install (30 seconds) and everything is just as rigid as before. Well worth the money. My only concern was that there was a bit of solder on the pipe that I delicately filed off. After that I polished it off with 600 grit sandpaper to eliminate any possible remaining file marks. If there had been a solder bump or file groove, it is quite possible that would have resulted in a leak, since the sealing location point is to the outside of the pipe. In the end all worked out well, and I am satisfied.

Scritto da: Tom Holland PA

Easy

If you're as old as me and handy, you've experienced sweating copper pipe with lead solder then the newer lead-free, making sure there isn't a drop of water in the line and hoping, compression fittings with the slip on brass ring that may work. SharkBite fittings replace all other methods when working with copper and they work even when there is water in the line. Simply cut the pipe and push on the connector. Great in older homes and hard to reach places.

Scritto da: T Nielson

false advertising

It said it was a pack of 6, I only got 1

Scritto da: Synonymous

Working great so far

Used these on a hot water tank and they've been tight and dry for more than a year. Make sure you have no tension on the joint and the connection is straight. Recommended.

Scritto da: Mountain man.

Slips on easily and no leaks

Had to reduce 1 1/4” pex to 1”. Used the 11/4” shark bite with a reducer adapter on the end.

Scritto da: Super Dave

Works great, very long delivery time

First time using shark bite and I am thoroughly impressed. Easy fast and leak free. I’m selling my propane torch

Scritto da: Debashis Dey

New age fittings

Check Sharkbite fitting on the net and you would know how they can make your life easier for plumbing. This are all push type fittings and we use it extensively all across with CPVC pipes.

Scritto da: claude

exellent

who ever invented these should be made king