SharkBite 1/2 Pulzier Crimp Tee, Pakkett ta' 10, Fitting tal-Plaming tar-ram, Pajp PEX, PE-RT, UC362LFA10

Name: SharkBite 1/2 Pulzier Crimp Tee, Pakkett ta' 10, Fitting tal-Plaming tar-ram, Pajp PEX, PE-RT, UC362LFA10
Brand: SharkBite
SKU: 0697285030138
Availability: InStock

Brand:SharkBite

3.8/5

€

SPEĊJIET: Fittings tar-ram SharkBite għandhom temperatura minima tax-xogħol ta '33 grad F f'160 PSI u temperatura massima tax-xogħol ta' 200 grad F fi 80 PSI. PREFERITI MILL-PRO: Għodod u fittings SharkBite jissodisfaw l-istess standards għoljin għal applikazzjonijiet ta 'plaming kummerċjali u residenzjali, li jgħaqqdu durabilità u faċilità ta' użu; iċċertifikat għall-użu fl-ilma tax-xorb u l-applikazzjonijiet tas-sistema tat-tisħin idronika. KWALITÀ DEJAN U GĦOLJA: Dawn il-konnetturi tat-tee crimp huma magħmula minn ram DZR mingħajr ċomb għal affidabilità fit-tul; ħielsa mill-korrużjoni u mingħajr akkumulazzjoni ta 'skala. KOMPATIBILTÀ: Tees crimp tar-ram jaħdmu tajjeb mal-pajpijiet PEX u PE-RT. SHARKBITE BRASS CRIMP TEE: Dan l-akkoppjar tat-tee crimp tar-ram SharkBite huwa twaħħil ta 'fluss sħiħ li jintuża biex jagħmel konnessjoni bejn żewġ pajpijiet PEX tal-istess daqsijiet bl-użu ta' ċrieki crimp tar-ram jew klampi tal-istainless steel.

Ammont

Żid mal-CART Ixtri issa

EAN: 0697285030138

Kategoriji Għodda u Titjib tad-Dar, Plumbing mhux maħdum, Pajpijiet, Fittings tal-pajpijiet u Aċċessorji, Fittings tal-pajpijiet,

Brand	SharkBite
Color	Brass
Connector Type	Tee
Exterior Finish	Brass
Item Dimensions LxWxH	0.56 x 4.88 x 8 inches
Item Weight	0.05 Pounds
Material	Made from premium lead-free DZR EcoBrass.
Number Of Pieces	10
Size	1
Thread Type	DZR

5 Star

4 Star

3 Star

2 Star

1 Star

Ikteb ir-reviżjoni tiegħek

L-email tiegħek mhux se tiġi ppubblikata. L-oqsma obbligatorji kollha huma mmarkati bi^*

Il-klassifikazzjoni tiegħek

Scritto da: Copper

It's definetly a half inch pex tee

It is what it says it is, a brass half inch tee fitting. holds well and doesn't leak. I'm not sure what else you want to know about when reading a review on a plumbing connector. I used it to add hot and cold water lines for a bidet, so far it's worked fine without any problems.

Scritto da: Gail Holleron

Seals tight

Worked perfect. Tubing slid on with ease and sealed tight.

Scritto da: Ray White

Know what you are doing! Not like me!

I guess you better know what you are doing with this tee. Mine leaked. So I guess I didn't know what I was doing. The attached pic shows my application. I still don't know why it leaked. Everything looked good to me. I used a good SharkBite clamp, and the proper tool. The plastic pipe clamped down real nice on the tee barbs. It was very tight. It looked perfect to me. It still does. But... it leaked. So, I switched to SharkBite U362LFA tee connector instead. That worked fine. No leaks.

Scritto da: gweedo

works great

if you got a big job best go with the pack of ten used the tee and elbows no issues

Scritto da: Glocktard

shark bite quality.

brand name and at a great price compared to the big box store. i tested one of these and a shark bite ring clamp using a Iwiss clamp tool and it passed the no go test. the wife even crimped it and said that was easy! i wanted to have this as an emergency parts kit in case i get a water leak because our house is completely Pex.

Scritto da: ray phillips

if your are mechanical inclined these are easy to use

good product for diy projects but are a little to expensive

Scritto da: Ra

This worked fine but I went with the Sharkbite fitting for my 3rd faucet.

This tee worked fine. I used the clamp system, as opposed to the crimp system. I did not buy the special tool, I made it work with standard tools. I decided to add a 3rd hose bib and I decided to try the same Sharkbite fitting that all my faucets have. No clamps needed. Just insert the pipe very firmly. https://amzn.to/2BRdQkL . The end of the pipe must be cut precisely flush for this to work properly. I like it.

Scritto da: Amazon Customer

works fine easy install

works well

Scritto da: Sam

Too small without clamps

I was upset to realize these are not meant to be tight with just the barbs. Luckily a tight wrapping of electrical-tape widened it enough to use as I intended.

Scritto da: Amazon Customer

Did the job

Did the job

Scritto da: Gerard F. Pilon

good price from the outlet store

Scritto da: isaak bergen

I love it

Good stuff

Scritto da: Amazon Customer

Works good

Works good