Protoco 1010 Standard 12-il Biċċa Wrench Rack, Organizzatur tal-Għodda għall-Kaxxa tal-Għodda, Karrettun tal-Għodda jew Immontat fuq Ħajt, Iswed 12-il Biċċa Iswed

Name: Protoco 1010 Standard 12-il Biċċa Wrench Rack, Organizzatur tal-Għodda għall-Kaxxa tal-Għodda, Karrettun tal-Għodda jew Immontat fuq Ħajt, Iswed 12-il Biċċa Iswed
Brand: Protoco
SKU: 0720012010100
Availability: InStock

Brand:Protoco

3.6/5

€

Għodod ta' kwalità għolja bi prezz ta' valur - imexxi s-suq billi jiġi żgurat li l-prodotti jkunu robusti, affidabbli u bi prezz raġonevoli.

Ammont

Żid mal-CART Ixtri issa

EAN: 0720012010100

Kategoriji Għodda u Titjib tad-Dar, Għodda tal-Enerġija u tal-Idejn, Organizzaturi tal-Għodda, Kaxxi tal-Għodda,

Dwar Protoco: Protoco timmanifattura kisi protettivi, prodotti iffurmati bl-injezzjoni tal-plastik, prodotti miksija bit-trab fluwidizzat, kisjiet, prodotti tal-baħar, u ippakkjar apposta, kollha kburi Magħmulin fl-Istati Uniti mill-1977. Versatili: Taqbel kemm SAE u wrenches metriċi, u żżomm wrenches minn 1 /4 sa 1 u 6 mm sa 24 mm; Perfetta għas-sett tal-wrench attwali tiegħek u għat-twaqqif ta 'wieħed ġdid ukoll! Hija wkoll iddisinjata biex taqbel mal-wrenches kollha tiegħek f'kexxun għoli ta' 1” fil-kaxxa tal-għodda jew il-karrettun tiegħek. Durabbli ħafna: Magħmul minn materjal tal-plastik ta 'densità għolja, li jipprovdi durabilità, reżistenza għall-impatt, u lonġevità; Organizzatur tal-għodda li se jkun parti mis-setup tiegħek għas-snin li ġejjin, appoġġjat minn kwalità Protoco u Made in the USA!. Immuntat faċilment: Dan Wrench Rack jista 'wkoll jiġi installat faċilment, u jiddendlu l-għodda tiegħek mal-ħajt iżommhom fil-linja tal-vista tiegħek, li jippermettilek tidentifika l-wrench korrett għax-xogħol f'daqqa t'għajn; Iffranka l-ħin li jkun moħli fil-kaċċa għall-għodda t-tajba, u agħmel il-proġetti tiegħek aktar malajr!. Organizzazzjoni Superjuri: Żomm il-kaxxa tal-għodda tiegħek organizzata u tieqaf taħli l-ħin tfittex il-wrench li għandek bżonn; Id-detentur tal-wrench ta’ 12 jew 15-il biċċa tagħna jżommhom kollha organizzati u b’mod ċar fil-vista minflok ma jżommu f’wiċċ l-ilma f’kexxun, lesti biex jintużaw meta jkollok bżonnhom.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Protoco
Brand	‎Protoco
Color	Black
Color	‎Black
Country of Origin	‎USA
Customer Reviews	4.6 4.6 out of 5 stars 123 ratings 4.6 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Finish	‎Powder Coated
Finish Type	‎Powder Coated
Head Style	‎Box End
Included Components	‎Wrench Rack
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Item Dimensions LxWxH	9 x 6.13 x 1 inches
Item Dimensions LxWxH	‎9 x 6.13 x 1 inches
Item model number	‎1010
Item Package Quantity	1
Item Package Quantity	‎1
Item Weight	‎4.9 ounces
Manufacturer	‎Protoco
Material	Plastic
Material	‎Plastic
Operation Mode	‎Mechanical
Part Number	‎1010_45
Product Dimensions	‎9 x 6.13 x 1 inches
Size	‎12-Piece
Style	‎12-Piece Standard
Warranty Description	‎Parts

5 Star

4 Star

3 Star

2 Star

1 Star

Ikteb ir-reviżjoni tiegħek

L-email tiegħek mhux se tiġi ppubblikata. L-oqsma obbligatorji kollha huma mmarkati bi^*

Il-klassifikazzjoni tiegħek

Scritto da: Shopping Guy

Best rack if you don't need to captivate your wrenches to carry them around

This wrench rack is perfect for organizing your tools in your tool box drawer when you don't need to carry all your wrenches around. This rack is the easiest to get wrenches in and out and they sit nicely in the grooves nestled into the two foam strips on the inside of each rail that keeps them in place unless you slam the drawer pretty hard. Compared to the type of rack that captivate the wrenches this also takes up a little less height and area in your drawer. If you want a rack that captivates to tools you can check out a couple of the other reviews I submitted, but for drawer organization and pure good looks - if you typically do your work near your box these are the best.

Scritto da: ED

Good rack, nice quality

These fit my snap-on wrenches well. Sizes 10-24mm. Im not sure how well they would work with the craftsman wrenches that most guys have for home since those are a little bulkier. These hold up well for everyday use in the shop though. I tend to like the gripper style better myself. The wrenches wiggle around in these some. Not a big deal I just like how the gripper style racks hold them tight and allow you to grab the entire rack and carry it around if needed. The quality of these are very good though. And a lot cheaper on amazon than off the matco truck. I give 4.5 stars.

Scritto da: Warren and Christine

Standard

Pretty much the standard in wrench racks. My others I've had for forever now. The foam on this initially had the wrenches sitting high up in the grooves but over time they settle in. I just wish they still had the clip that went over the rack that held them in place in case you needed to take them somewhere. I'm not a fan of the clip in style racks because I don't want to fumble getting a wrench. Time is money and I don't need frustration.

Scritto da: RB211

Perfect For Drawer Use

Perfect if you keep your wrenches in a tool box drawer. The addition of the raised, foam down each side is a nice feature, however I'm sure it will compress over time and not be as effective at keeping each wrench placed.

Scritto da: Wesley Schaefer

Cheap 3d printed

They hold wrenches. But don't breathe on them wrong or else they fall out of their slot. So it if they or in a tool box drawer like mine they will all fall out all over every time you open or close your drawer. Make your own or buy better ones.

Scritto da: JerseyBoy0034

Yes please

These are the best for containing large four way angle wrenches up to 1 1/4” and still having them fit in a drawer. Also work great for double box end offset wrenches.

Scritto da: Chris A.

... this is the only one that is worth a crap. I wish they made version with one straight ...

I've tried several wrench organizers and this is the only one that is worth a crap. I wish they made version with one straight side for a slightly more efficient use of drawer space.

Scritto da: Gary Barrentine

Does a good job.

Fits in tool cart drawer. Keeps ratcheting wrench in place and organized. Does not slip when drawer is closed.

Scritto da: Tim

excellent

Solid low profile wrench rack will let you put a complete set of 15 wrenches into a low profile drawer. These have thick teeth and solid construction so they hold up well. The 15 wrench versions can be hard to find sometimes, so very happy to be able to buy them again. Use along with the reverse style to load up your drawer with little wasted space.

Scritto da: Mark T

The best wrench racks!

Although a bit on the pricey side, they are well worth the money! They fit an entire normal set of wrenches and the foam keeps the wrenches from sliding around. I have 7 of these (a combination of the normal ones and reversed ones) in my tool box at work and I love them.

Scritto da: Mark T

Best wrench racks!!

Scritto da: Amazon Customer

Not sure why one picture says magnetic, because it is not.

Looks good, better suited for in a toolbox than hanging on the wall. Not sure why one picture states it is magnetic because it definitely is not. I bought this under the impression that it was magnetic.

Scritto da: Uncle Evil

Original Wrench Racks for a good price. Wish I could buy the reverse version ...

Original Wrench Racks for a good price . Wish I could buy the reverse version as well for the same price .