Prime-Line N 6599 Assemblaġġ tar-romblu tal-bieb tal-mera, 1-1/2 pulzier, rota tal-plastik, ball bearings, konkavi, mitħna

Brand:PRIME-LINE

3.4/5

€

DESKRIZZJONI TAL-PRODOTT Dan l-assemblaġġ tar-romblu tal-bieb tal-mera huwa mibni minn akkomodazzjoni tal-aluminju estruż, u jiġi f'finitura tal-aluminju mitħun. L-akkomodazzjoni miżuri 1-3/4 pulzieri wiesgħa, hija 1/2 pulzieri ħoxna u 3 pulzieri tall. Din il-parentesi tad-djar għandha wkoll boxxla tonda estruża, u tintuża minn Monarch Door Company fuq il-bibien tagħhom f'qafas tal-aluminju tas-serje "500". Ir-rota hija mibnija minn plastik durabbli li jipprovdi għal roll lixx, fit-tul u kwiet u fiha ball bearings tal-azzar u tarf konkavi (grooved). Dan l-assemblaġġ tar-romblu tal-bieb tal-mera jintrama fuq il-qiegħ tal-bibien tal-closet bil-mera li jiżżerżqu, huwa aġġustabbli ladarba jiġi installat, u jintuża minn ħafna manifatturi tal-bibien tal-closet. MILL-MANIFATTUR Dan ir-romblu tal-bieb tal-mera huwa mibni minn najlon u jiġi mwaħħla ma 'akkomodazzjoni tal-aluminju. Għandu disinn ta 'muntaġġ tal-qiegħ aġġustabbli b'boxxla tonda estruża. Dan ir-romblu tal-istil joqgħod fuq il-bibien tal-gwardarobba tal-qafas tal-aluminju Monarch Door Co. 500 Series.

Ammont

Żid mal-CART Ixtri issa

EAN: 0049793065995

Kategoriji Għodda u Titjib tad-Dar, Ħardwer, Ħardwer tal-Bibien u Serraturi, Ħardwer tal-bibien li jiżżerżqu,

Faċli biex tinstalla f'inqas minn 30 minuta bi ftit għodod sempliċi. Slajds fil-kanal estruż fuq il-bieb. Mibnija minn rota tal-plastik bil-ball bearings tal-azzar, immuntata f'kaxxa tal-aluminju estruż. 1-1/2 pulzieri dijametru konkavi ball bearing romblu. 1-3/4 pulzieri x 1/2 pulzieri x 3 pulzieri tad-djar tal-assemblaġġ. Użat minn Monarch Door Company fuq 500 serje ta 'bibien tal-closet tal-mera li jiżżerżqu b'qafas tal-aluminju.

Assembly Required	Yes
Batteries Included?	‎No
Batteries Required?	‎No
Brand	PRIME-LINE
Color	Mill
Color	‎Mill
Country of Origin	‎USA
Customer Reviews	4.4 4.4 out of 5 stars 172 ratings 4.4 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Finish	‎Mill
Included Components	‎Hardware;Door, Gate & Window Hardware;bi-fold-door-hardware
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item model number	‎N 6599
Item Package Quantity	‎1
Item Weight	0.11 Pounds
Item Weight	‎1.76 ounces
Manufacturer	‎Prime-Line Products
Material	Plastic
Material	‎Plastic
Part Number	‎N 6599
Product Dimensions	‎1.75 x 3.81 x 0.5 inches
Size	‎1-1/2 in.
Warranty Description	‎Goods are warranted against manufacturing defects for 1 year. In no case is Prime-Line responsible for user related damage or damage incurred during installation. Warranty is void if products are subjected to abnormal conditions, misapplication or abuse.

5 Star

4 Star

3 Star

2 Star

1 Star

Ikteb ir-reviżjoni tiegħek

L-email tiegħek mhux se tiġi ppubblikata. L-oqsma obbligatorji kollha huma mmarkati bi^*

Il-klassifikazzjoni tiegħek

Scritto da: Robert

ALMOST fit the door. With a little sanding the closet door with new wheels roll smooth as silk.

30 year old bracket on the door would not accept the new wheel. I suspect the milling is more accurate on the new wheel which is smooth vs the door bracket which has casting ridges. 300 grit silicon carbide sand paper onto the top of the slot of the door bracket solved the problem. Faster if a rasp file is used prior to the sandpaper. Took about 5 minutes of rasping/ sanding (after about 3 hours of experimentation). Closet door with new wheels smooth as silk.

Scritto da: Stephen tibbs

great replacement for old worn out sliders on closet doors

super well sliding door gliders replacements for closet doors. fit well but had to shave small amount off with file to fit.

Scritto da: G. Kan

Better than I thought it would be

Old closet doors were a pain to move. The wheels were damaged and were hard to move. They were simple to replace with a second person helping. Needed someone to help lift the door off the track. Wheels aren’t locked in so make sure to hold on to them to clear tracks. Once off of track the wheels can drop straight down. Slide new ones in and place back onto the tracks. Please NOTE that these are round fittings where it slides into the mount. There is a similar looking one that has a square fitting. Make sure you are getting the right ones. There is a screw on top of the mount attached to the door that will adjust the height of each wheel to ensure the doors can close flushed to the wall.

Scritto da: Rob B.

They Do Not Fit a Monarch Sliding Mirror Door WITHOUT MODIFICATIONS

These looked absolutely identical to the old/original ones I pulled out of my door. The problem is they do not slide onto the door. The casting is off just enough to cause interference between the two. I had to tap out the piece it slides into on the door, place it in a vise and grind down about 1/16" for it to now slide within the mounting piece. Having said all that, what should have been a 5 minute installation took about an hour between taking the doors completely out, laying them on their sides to get the frame track out to grind it down, had they fit correctly, the whole job would have taken 5 minutes... Now, considering they might be scarce elsewhere, once they were installed with the modifications, they work just like new. So, unless you have the tools and time, I would hire someone to install them for you.

Scritto da: P.H.Various

Really tight fit

The wheel spins beautifully. The assembly however is very difficult to install. The size is exactly the same as the receiver. So you have to tap this thing in with a hammer. I can’t speak for anyone but myself, but I really don’t like having to hammer my mirror doors. Just saying it’s a bit nerve-racking. Either way it’s in and they roll really nice.

Scritto da: Dee

Just what I needed....

I was so happy when I found these as my sliding closet doors are a discontinued model. This part fit perfectly. Sliding the doors runs smoothly on the track. This saved me replacement costs of over 700 USD.

Scritto da: edward Biedrzycki

It works

That it worked

Scritto da: GCC

Just What I Needed

My mirrored sliding doors were installed in 1985. I'm so thankful that I checked Amazon and found the exact part needed to replace the original door roller assembly. These worked great and were easy to change out and properly adjust. Now my sliding doors work like a charm!