POWERTEC 71136-P2 Heavy Duty Leg Leveler Kit

Name: POWERTEC 71136-P2 Heavy Duty Leg Leveler Kit
Brand: POWERTEC
SKU: 0843441119074
Availability: InStock

Brand:POWERTEC

3.8/5

€

L-introduzzjoni tal-Heavy Duty Leg Leveler KitbyPOWERTEC.Dawn il-levelers tar-riġlejn ta 'kwalità għolja kienu ddisinjati biex jerfgħu, filwaqt li jipprovdu appoġġ u stabbiltà akbar għall-installazzjonijiet tal-għamara tiegħek. Kemm jekk f'ambjent professjonali, f'garaxx jew fid-dar, huma ser jagħtuk is-soluzzjoni perfetta għall-livellar ta 'biċċiet multipli ta' tagħmir. Kull riġel huwa mibni minn azzar miksi biż-żingu bil-makna ta 'preċiżjoni, li jipprovdi disinn ottimali, robustezza u durabilità. Id-disinn uniku tagħhom lipped f'forma ta' L għandu erf integrat li jappoġġja l-piż tat-tagħmir tiegħek, u pads tas-saqajn tan-najlon biex jiżguraw stabbiltà solida reżistenti għall-mar. fuq l-uċuħ tal-art. Biex turi versatilità sħiħa, tista 'tehmeż dawn l-apparati konvenjenti fuq ġewwa tat-tagħmir tiegħek, biex iżżommhom moħbija mill-vista. L-installazzjoni hija pjuttost sempliċi. Biss ganċhom mal-kabinett tiegħek (jew għamara) u waħħal kull riġel bil-viti pprovduti. Aħna nipprovdulek ukoll sett handy ta 'lock nuts biex jipprevjenu wobble u vibrazzjoni mhux mixtieqa, sabiex tkun tista' tikseb il-proġetti tax-xogħol tal-injam tiegħek isiru għall-perfezzjoni. * Workbenches * u Aktar! POWERTEC huwa manifattur ewlieni ta 'aċċessorji tax-xogħol ta' l-injam ta 'kwalità għolja, levelers tar-riġlejn b'saqajn ta' livellar aġġustabbli, u assortiment ta 'partijiet ta' sostituzzjoni OEM. Aħna impenjati li jaqbżu l-aspettattivi, filwaqt li nġibu l-aħħar innovazzjonijiet, teknoloġija u żvilupp tal-prodott lill-industrija.

Ammont

Żid mal-CART Ixtri issa

EAN: 0843441119074

Kategoriji Għodda u Titjib tad-Dar, Ħardwer, Ħardwer tal-għamara, Saqajn tal-għamara,

LOCK NUTS: Imperattiv għal kwalunkwe proġett ta 'workshop, garaxx jew xogħol ta' l-injam li jeħtieġ esperjenza ta 'utent kontra l-wobble u l-vibrazzjoni. DISINN SUPERJORJU: Karatteristiċi ta 'reġistru integrat li jiżgura li t-tagħbija tal-piż tinġarr mill-levelers (mhux il-viti tal-installazzjoni), flimkien ma' pads tas-saqajn tan-najlon li mhux se jħammġu l-art jew il-kabinett tiegħek. KWALITÀ PREMIUM: Magħmula minn azzar imħatteb miksi biż-żingu maħdum bi preċiżjoni għall-appoġġ tal-piż u stabbiltà akbar għal installazzjonijiet u tagħmir ta 'għamara itqal. FUNZJONI: Perfetta għal applikazzjonijiet ta 'livellar, bilanċ - aġġustamenti għal kabinetti, unitajiet ta' xkaffar, imwejjed u bankijiet tax-xogħol. It-tagħbija massima hija ta 'madwar 600 lbs. JINKLUDI: (8) Saqajn Leveler, (8) skorfini, (32) viti #10 x 5/8, u (2) wrench hex 5mm.

Batteries Required?	‎No
Brand	POWERTEC
Color	Silver
Color	‎Silver
Country of Origin	‎Taiwan
Customer Reviews	4.7 4.7 out of 5 stars 533 ratings 4.7 out of 5 stars
Included Components	‎INCLUDES:
Item Dimensions LxWxH	5.75 x 5.5 x 3 inches
Item model number	‎71136-P2
Item Package Quantity	‎1
Item Weight	‎2.82 pounds
Manufacturer	‎POWERTEC
Material	Zinc-Plated Steel
Material	‎Zinc-Plated Steel
Part Number	‎71136-P2
Product Dimensions	‎5.75 x 5.5 x 3 inches
Style	‎8pk
Unit Count	1.0 Count

5 Star

4 Star

3 Star

2 Star

1 Star

Ikteb ir-reviżjoni tiegħek

L-email tiegħek mhux se tiġi ppubblikata. L-oqsma obbligatorji kollha huma mmarkati bi^*

Il-klassifikazzjoni tiegħek

Scritto da: Tony Blevins

they are nice

I built a drill press stand and I used these to level the front of the stand

Scritto da: Eric John Schultz

Great little leveling legs

Used these to level a large storage shelf that I built. They are easy to install and adjust and are quite sturdy. The sheet metel lip makes mouning a snap and provide additional strength. I drilled clearance holes in the floor to allow easy accuss to the 5mm hex adjustment in the threaded legs (not shown). I used blue thead locker when installing the threaded legs. This provides some anti-vibration mitigation after leveling.

Scritto da: Woodworker

Great to level a CNC

I used these to level my CNC router table. They worked great. I wish they were a little heavier duty though. They work great though.

Scritto da: lesley

Ideal for the job

Worked really well and solved the problem I encountered

Scritto da: J Cassidy

Solid, Well-Built, Perfect

We were installing bookshelves where the floor was uneven in 2 directions. By using these solid legs, we were able to use a level to get the bookshelves level – both front-to-back and side-to-side – using an allen wrench to adjust the height. It's also nice the the feet tilt 360 degrees, so that the sit flatly on the unlevel floor. Awesome product!

Scritto da: Bob

Perfect

I built an 8x8 frame to but a roughneck shed on. Getting the ground perfectly level would have been a huge pain in the butt. These little legs worked perfectly. I am very pleased with how easy they made my project.

Scritto da: Christian

Highly Recommend

These are great leg levelers for pretty much anything. I have 8 of these on a big, heavy workbench (4 would have been plenty but I needed the extra adjustability). They hold weight no problem and are easy to install and adjust. A slightly cheaper alternative to the Rockler ones and you get the same value

Scritto da: Andrew G.

Excellent quality and construction

I started off buying a set of these for leveling a large table saw outfeed table I built. They worked beautifully for helping to get it level and set to the same height as my table saw. When I built my miter saw station I again bought these to help level the two sides and get everything level with the miter saw bed. Again, they worked beautifully. I am now ordering a 3rd set to use for leveling my router table with my table saw. These have been a great addition to my shop especially when working on a concrete floor that's 40+ years old and isn't exactly level throughout.

Scritto da: Tony

Workable Solution, Hope They Hold Up

I have installed these with a lifting castor set on my movable work Table/Cabinet. My shop floor is not perfectly level, so I installed them so I can adjust them to around 3/4" bellow the wood corners, and adjust the feet to level with my table saw. I wish the plastic pads would look a bit more robust, but time will tell. So far the pads are taking the weight without breaking.

Scritto da: Typical Customer

Great set

Does what is needed. Allen key isn’t the best, I ended up just using my own set.

Scritto da: Amazon Customer

Happy with my purchase

Nice heavy gauge metal, clean threads and they're all consistently bent. Box says "made in Taiwan" and I believe it. Same quality as my German made ones from Lee Valley. Good purchase!

Scritto da: Tony cummins

Good service arrived on time

Easy to adjust and easy to install

Scritto da: Phil H.

Easy to install and adjust height

Easy to install and adjust, not as heavy duty as described, the bottom pad is plastic not rubber as described,