Norton Stripping Grinder Wheel, Stripper taż-Żebgħa għal Metall, Strixxa Rapida, Dijametru ta '4-1/2 pulzier Rota ta' Pulzier Oħxon Extra adattabbli bi Grinder tal-Angolu Rett, Pakkett ta 'Diska 1

Name: Norton Stripping Grinder Wheel, Stripper taż-Żebgħa għal Metall, Strixxa Rapida, Dijametru ta '4-1/2 pulzier Rota ta' Pulzier Oħxon Extra adattabbli bi Grinder tal-Angolu Rett, Pakkett ta 'Diska 1
Brand: Norton
SKU: 0076607040152
Availability: InStock

Brand:Norton

2.7/5

€

Ix-xkupilja tar-rota tal-wajer b'ċentru depressi Norton Non-Woven Rapid Strip jeħel mal-orbita każwali u xkatlar rotanti biex tneħħi żebgħa, sadid, kisjiet, burrs tat-tarf ħfief, linji tal-firda, u jteptep. Id-disinn tal-web miftuħ semi-flessibbli jirreżisti t-tagħbija u jippermetti li r-rota tikkonforma mat-truf, il-kontorni, u l-uċuħ irregolari mingħajr ma tinqala '. L-abrażiv oħxon huwa mqassam b'mod uniformi u magħqud madwar ir-rota biex jipprovdi prestazzjoni konsistenti. L-azzjoni aggressiva tat-tqattigħ ħieles tgħin biex tevita t-tixbiħ fuq il-biċċa tax-xogħol. Ir-rota timmonta bl-użu tal-buttun tal-arbor bil-kamin 5/8-11 b'ċentru depress. Ir-roti li joborxu b'azzjoni rotanti u xkupilji tal-wajer iwaħħlu jipprovdu azzjoni aggressiva ta 'qtugħ ħieles għat-tqaxxir, tindif u tneħħija ta' burr ħafif fuq injam, plastik, ġebel, fibra tal-ħġieġ u metall. It-tip ta 'rbit standard huwa toqba tal-arbor fiċ-ċentru tal-pinzell jew rota. Norton Abrasives timmanifattura abrasivi għall-ixkatlar, għat-tħin u għall-illustrar. Il-kumpanija, imwaqqfa fl-1885, tissodisfa l-istandards 9000 u 14001 tal-Organizzazzjoni Internazzjonali għall-Istandardizzazzjoni (ISO) għall-ġestjoni tal-kwalità u l-ambjent.

Ammont

Żid mal-CART Ixtri issa

EAN: 0076607040152

Kategoriji Għodda u Titjib tad-Dar, Industrijali u Xjentifiċi, Żebgħa, Trattamenti tal-Ħitan u Provvisti, Provvisti u Għodda tal-Pittura, Żebgħa li tqaxxir u li jneħħu,

It-Tip tar-rota huwa 27 b'dijametru ta '4 1/2 pulzier. Dimensjonijiet: 4-1/2 x 5/8 - 11-il pulzier. Din ir-rota hija ddisinjata b'rabta avvanzata tar-reżina li tipprevjeni t-twaqqigħ, it-tqabbid, il-gogging u l-ħidma mill-ġdid. Dan id-disinn jaħdem tajjeb ma 'varjetà ta' magni, horsepower u operazzjonijiet sa 12000 RPM. Magħmula minn ossidu tal-aluminju biex tiżgura l-lonġevità, din id-diska għandha kostruzzjoni tal-web miftuħa li tnaqqas it-tagħbija, alternattiva kbira għax-xkupilji tal-wajer. Din id-diska taċ-ċentru magħfus mhux minsuġa bi żrar oħxon hija xierqa għall-użu fuq azzar tal-karbonju artab, ħadid fondut, konkrit, aluminju u uċuħ artab oħra. Din id-diska tat-tqaxxir kompatibbli tal-grinder tal-angolu rett hija għażla ideali għal varjetà ta 'użi inklużi tqaxxir tal-kisi u t-tneħħija tas-sadid u l-linji tal-firda.

Brand	Norton
Compatible Devices	Angle Grinder
Country of Origin	China
Domestic Shipping	Item can be shipped within U.S.
Grit Material	Aluminum Oxide
International Shipping	This item can be shipped to select countries outside of the U.S.
Is Discontinued By Manufacturer	No
Item Diameter	4-1/2 Inches
Item Dimensions LxWxH	4.5 x 3 x 4.5 inches
Item model number	07660704015
Manufacturer	St. Gobain Abrasives
Product Dimensions	4.5 x 3 x 4.5 inches; 5.6 Ounces

5 Star

4 Star

3 Star

2 Star

1 Star

Ikteb ir-reviżjoni tiegħek

L-email tiegħek mhux se tiġi ppubblikata. L-oqsma obbligatorji kollha huma mmarkati bi^*

Il-klassifikazzjoni tiegħek

Scritto da: tjl

only one

only one came, description says pack of 5

Scritto da: J

Better than what Home Depot sells

I used to be able buy this item at Home Depot, not anymore. HD tries to force you to buy exactly what they want you to by only selling one of a particular item. They used to sell this one by Norton but now they only sell one by another brand that is significantly inferior to this one. Boycott home depot.

Scritto da: m. reuling

Little expensive for the life

these things are pretty damn good. They don't have the life that i was expecting. I bought 1 to remove the paint from 3 old aluminum stadium seats i have in my backyard. And 1 lasted just enough to do one seat. They work very quickly but you really should wear long sleeves and pants becuase chunk of the disc will fly off at a high rate of speed and they can sting pretty good. And of course wear eye protection, maybe even a full face shield. When i would try to sand the rivets on the seats a piece or 2 would always fly off, and i was wearing shorts and it gave me a couple little welts. All in all it worked great, but i need to buy at least 2 more for the other 2 seats.

Scritto da: Pam Lindberg

Disc's are good........but they list as a quantity of 5.....you only receive 1

improper quantity listing........

Scritto da: Thomas Howard

Overpriced, don't hold up very well, wears out quick

Have been using these type of discs from other manufacturers to grind stuff for years; the last time I bought some of these type of discs in bulk was a few years ago at Harbor Freight (I think they were like Pittsburgh brand). For some reason they stopped carrying them though, albeit they lasted for quite a while. So now I ordered a couple of these instead and let me tell you, I don't know if they're running out of whatever these things are made of or maybe this manufacturer adds some plutonium or what to them, but they've gotten expensive as heck and don't last a fraction of what the cheap brand did. Part of the rating scale asked me to rate this thing's sheerness - not sure what they meant by that but it sure feels like they're sheering your money right out of your wallet.

Scritto da: 2manyfenders

Works Better Than Others, But There Are Better Options

Of the paint stripping wheels I've used, this version from Norton is the best, by far. This does the job and outlasts the others brands I've tried. That said, it's a costly way to do business. What I've discovered is it works much better to get a Diablo backing pad and use 24 grit Diablo grinding discs to get the job done. The Diablo griding discs cost a fraction of what these paint stripper discs cost and far outlast the stripper discs by a long, long, long time. (you can use either 4 1/2" or 5" pads and discs on your 4 1/2" grinder). It's a dusty endeavor, so keep that in mind. Also, care must be used if using a grinding disc (more care than is needed if using stripping discs), as you can gouge woodwork easily if not careful, if you are exhausted, etc.

Scritto da: Nelson

My favorite disk

I repainted a 25 year old snow thrower with the help of these. Everyone seems to recommend flap disks, but they don't move paint and rust anywhere near as fast as these Norton disks. They are also really good at putting an edge on an old tool. They grind off metal fast but not so fast that you end up with a ragged, rolled over edge. Finally the life seems really good. I stripped the entire front end of the snow thrower and about 8 yard tools on a single disk, and that one disk still has 75% of its grit left. I'm ordering more now, just so I have it ready for later.

Scritto da: jagpilot

Effective and fast. Didn't exactly work for my job.

Works great but Wish it lasted longer. I would have needed three or four to really do my job right stripping old wrought iron. Would have got too expensive. Burned one up and gave up. Too bad. I just ended up stripping the worst areas that were actively flaking. Job was half assed, but the best I could do based on the time and pay involved. Review would be 5 star if it lasted longer or was a few bucks cheaper.