MAGID TRX746 Windstorm Series Impatt Ingwanti

Name: MAGID TRX746 Windstorm Series Impatt Ingwanti
Brand: MAGID
Availability: InStock

Brand:MAGID

3.1/5

€

Jekk il-post tax-xogħol tiegħek jinkludi ħidmiet li jeħtieġu protezzjoni tal-idejn, flessibilità u reżistenza għas-sħana, ma tfittexx aktar minn dawn l-Ingwanti tal-Impatt MAGID T-REX TRX746 Windstorm Series Cut-Resistant Impact. Is-Sistema ta 'Difiża M-Flex tinkludi d-disinn TPR ultra-flex b'130 punt ta' flex integrati għal immaniġġjar faċli ta 'oġġett ta' kull daqs. Il-palm tal-qabda RepTek„¢ iżid ir-reżistenza għas-sħana u jipprovdi qabda niexfa superjuri. L-ingwanti tas-sigurtà jinkludu wkoll sarġ tal-kbir imsaħħaħ u lqugħ addizzjonali tat-TPR bejn is-saba 'l-kbir u l-indiċi biex jiżguraw dawn il-punti komuni ta' niskata u qabda. Għall-kumdità, dawn l-ingwanti reżistenti għall-qtugħ tal-livell A6 għandhom sistema ta 'kuxxin tal-palm li tgħin biex itaffu l-impatti, u s-Sistema ta' Venting CoolMesh biex ittejjeb il-fluss tal-arja u żżid id-dissipazzjoni tas-sħana. Dan it-titjib fil-kumdità jżomm lill-impjegati tiegħek fuq il-kompitu u jgħin biex jinkoraġġixxi l-konformità tal-ħaddiema għal sit tax-xogħol aktar sigur. Livell ta' Qtugħ ANSI 2011: 4 ANSI 2016 Livell ta' Qtugħ: A6 ANSI Livell ta' Brix: 4 ANSI Livell ta' Impatt: 1 Kisi: L-ebda Kisi Materjal tal-kisi: Ġilda sintetika Disinn tal-kisi: Kuluri tal-kisja tal-palm: Griż Tip ta' ingwanti: Saba' Sħiħ ID Pull Tab: Ebda Impatt Protezzjoni: TPR Protezzjoni tal-Impatt: Iva Materjal: Materjal tal-Ġilda: Piż tal-Materjal tal-malji: Piż Medju / Palm Standard: Kuttunar tal-palm mhux ikkuttunat: Crotch imsaħħaħ mhux ikkuttunat: Iva Kulur tal-qoxra: Iswed Daqs: Kbir Stil: Mechanics Thumb Crotch: Iva Tip: Idejn Għeluq Speċifiku tal-Polz: Hook and loop

Ebda unitajiet disponibbli

EAN:

Kategoriji Għodda u Titjib tad-Dar, Sigurtà u Sigurtà, Tagħmir Protettiv Personali, Protezzjoni tal-Idejn u tad-Driegħ, Ingwanti tal-Lab, Sigurtà u Xogħol, Ingwanti tax-Xogħol tas-Sigurtà,

ANSI Livell A6 Reżistenza għall-Qtugħ fil-Palm, ANSI Livell 4 Reżistenza għall-brix, u ANSI Livell 4 Reżistenza għat-titqib. Il-palm RepTek Grip iżid ir-reżistenza għas-sħana u jagħti qabda niexfa superjuri. Cool Mesh Venting System ittejjeb il-fluss ta 'l-arja sa 60%, li tirriżulta f'dissipazzjoni tas-sħana aktar mgħaġġla minn drappijiet tradizzjonali li komunement jinstabu fuq ingwanti ta' impatt ta 'stil simili. Gwardja TPR addizzjonali bejn is-saba 'l-kbir u l-indiċi tassigura punti ta' niskata komuni. Is-sistema tad-difiża m-flexes ġdida u mtejba tad-dahar ta 'l-idejn tutilizza disinn tpr ultra-flex b'130 punt ta' flex integrat, protezzjoni tas-swaba 'pinch-point, u ventilazzjoni għal nifs.

Brand	MAGID
Color	A6 Reptek Palm
Department	Unisex-adult
Item model number	TRX746L
Manufacturer	MAGID
Material	Leather
Product Dimensions	10 x 5 x 0.6 inches; 7.76 Ounces
Size	9/L
Special Feature	Cut Resistant

5 Star

4 Star

3 Star

2 Star

1 Star

Ikteb ir-reviżjoni tiegħek

L-email tiegħek mhux se tiġi ppubblikata. L-oqsma obbligatorji kollha huma mmarkati bi^*

Il-klassifikazzjoni tiegħek

Scritto da: D. Licious

Loose fit, numb feel. Decent quality on first impression

Without being able to test these rigorously, my first impression is that the fit isn't great. I am kind of a gear addict. I try a lot of different types of gloves. I bought these to replace a pair of non-cut-resistant gloves to use on vehicle extrication scenes. I had a piece of laminated glass slice through a pair of goat leather work gloves and didn't want a repeat. The palm feel is rubbery and somewhat loose, which is perhaps somewhat to be expected for this type of glove. Another pair of cut resistant glove I used has a similar floaty feel due to the cut-resistant layer (I think that's what it is) but fit much better. It feels loose on my fingers, it is even looser around the wrist. I have smaller hands, so that might contribute. I usually don't have an issue finding gloves that fit well, though.

Scritto da: Erik Ray

The Velcro is Barely On There

The Velcro is barely On There it Wont Last a Month, And I Will Have To Tape Them On Or Something. I Like The Grip These Have it is Nice, Outside of The Velcro is Cheaply On There I Would Have Given 5 Stars, Butt That Is A BIG ISSUE

Scritto da: Scooter

Great glove.

Great gloves. The company I work for require cut level 5 impact resistant gloves. We have tried a bunch of them but these I bought for myself are the best there is. Guys who hate wearing them don’t mind wearing these. 5 stars for sure. The rubber on the inside don’t hold up that well but that’s not a big deal.

Scritto da: Amazon Customer

the grip I get with this product is most important

I carry glass and never worry about my hands sliding or getting cut you can feel the tight grip. Your hands do get a little warm but the safety I feel with these gloves is a good trade off

Scritto da: Robert K.

Not as tough as they'd have you believe

The puncture resistance is not as high as they claim ,a simple splinter won't get through but a sharp piece of metal with light pressure will.The cut resistant and puncture resistant material is only on the palm and under hand part of the glove ,it gives better control of movement and is great for hot humid weather but give no protection from the sides or top.The impact material is glued and not stitched on like with other Magid gloves ,meaning it is more likely to tear off.Unlike most cut resistant gloves these are not knit ,mean less protection but more flexibility.The stitching around the wrist is weak and fraying .Also the wrist is too far down the arm ,so the while the fingers and thumb are a good fit they tend to slide up and the finger tips become loose ,advise for a second strap on the wrist

Scritto da: Jarl olson

Good

Well the are comfortable but they run big it took about a month to destroy them but at my work most gloves only last 2 weeks to destroy so getting a month out of them is pretty good

Scritto da: Jeffrey Holt

Just what I needed

These are my first pair of impact resistant gloves and I love them. Fingers are free to do any task I need to do with no bulky feeling. GREAT GLOVES!

Scritto da: bboyer8690

Horribly inconsistent.

I have bought 4 pairs of these gloves. I work for a junk removal company, and deal with a variety of different environments that are especially punishing on my hands. The first pair fit perfectly, they were the green/yellow with white palm version. Durability was pretty good, the grip honestly was very lacking, they were so smooth they were slick. They lasted a while before they were split open at work from some nails. The 2nd pair, fit even better somehow, they were the black and yellow version. A little bit better on the grip, not much. These lasted a bit until I got a 3rd pair due to having to throw them out from doing a disgusting job. The 3rd pair was a bit loose. At the time of writing [11.21.19] I still have them. They're starting to wear down and come apart at the seems. 4th pair, with images attached to this review look so poorly made and fit so horribly I exchanged them for completely different gloves.