Ktajjen tax-xita Monarch 20042 Installazzjoni tal-katina tax-xita tal-adattatur tal-kanal miksija bit-trab iswed tal-aluminju, standard

Brand:Monarch Rain Chains

3.7/5

Adapter tal-kanal miksi bit-trab iswed ta 'Monarch għall-Kit ta' Installazzjoni tal-Katina tax-Xita, Daqs standard itejjeb il-fluss tal-ilma, inaqqas it-titjir, u jikkumplimenta l-katina tax-xita tiegħek. Taqbel mal-biċċa l-kbira tal-kanali u tiġi flimkien ma 'pjanċa tar-ram addizzjonali biex taqbel ma' kanali akbar. Installazzjoni faċli li ma teħtieġ l-ebda għodda.

Ebda unitajiet disponibbli
DIMENSJONIJIET ĠENERALI TAL-OĠĠETT: Ir-reducer tal-katina tax-xita jkejjel 5” (L) x 3.5” (W) x (3)” H. Ftuħ ta 'fuq 2 pulzieri, ftuħ ta' qiegħ 1.75 pulzier; Kun żgur li tnaddaf il-kanali tiegħek qabel ma tinstalla l-kit tal-adapter tal-katina tax-xita għall-katina tax-xita ta 'barra tiegħek. INSTALLAZZJONI FAĊLI: L-installatur tal-kanal jwaħħal faċilment direttament mal-parti ta 'fuq tal-ktajjen tal-kanal tax-xita. Il-bolt tar-ram fuq l-adapter tal-katina tax-xita żgħira għandha kanal ċentrali biex tistrieħ u tassigura l-ktajjen tax-xita għall-kanali. ŻIEDA L-APPELL TAL-KATNA: Installatur tal-katina tax-xita, flimkien ma 'downspouts tal-katina tax-xita għal kanali, joffri appell uniku tal-katina li jtejjeb id-dehra tad-dar tiegħek. Imla d-dehra billi żżid wieħed mill-baċiri tal-ankrar jew l-imqass tal-ankrar tagħna. KOSTRUZZJONI TA 'KWALITÀ PREMIUM: L-installatur tal-katina tax-xita huwa magħmul minn aluminju b'bolt tar-ram biex hang il-katina tax-xita tiegħek. Il-kit tal-katina tax-xita jipprovdi mod sikur mingħajr saldatura biex iddendel il-ktajjen tax-xita tiegħek mill-kanal. DISINN FUNZJONALI: L-adapter tal-katina tax-xita huwa ddisinjat biex joqgħod fil-kanal tax-xita fuq it-toqba tad-drenaġġ fejn hemm downspout. Id-detentur tal-katina tax-xita jaqbad l-ilma tax-xita u jonqos biex jidderieġi l-ilma mill-kanal għal ġol-downspouts tal-katina tax-xita.
Country of Origin India
Customer Reviews 4.6 4.6 out of 5 stars 1,067 ratings 4.6 out of 5 stars
Item model number 20042
Item Weight 4.6 ounces
Manufacturer Monarch Rain Chains
Product Dimensions 5 x 3.5 x 3 inches

3.7

13 Review
5 Star
78
4 Star
14
3 Star
5
2 Star
2
1 Star
2

Ikteb ir-reviżjoni tiegħek

L-email tiegħek mhux se tiġi ppubblikata. L-oqsma obbligatorji kollha huma mmarkati bi*

Scritto da: Juana
Useful
These adapters for use with rain chains were easy to install and use immediately. I had three installed, with the rain chains in about an hour. Waiting for rain so we can watch them in action.
Scritto da: Cary Alburn
A pain to install, but once installed, worked perfectly.
The media could not be loaded. This adapter might work well in a pre-existing downspout hole, but cutting a hole where there wasn’t one was a pain. It would have been helpful if the instructions stated what size hole saw might be appropriate, but it didn’t. I think a 2 1/4” would work, but I only had a 2” and 2 1/2” in my tool box, so I used the larger one—hole saws are expensive. And cutting into a thin aluminum gutter is difficult. The reinforcement plate provided is slightly too wide for a standard 5” K gutter—so I cut off about 1/4” with tin snips so that it would lay flat in the bottom of the gutter. That’s something that the manufacturer should change, to make it easier to install in a 5” gutter—it would still have to be shaved for a 4”, but very few gutter installers install 6” gutters. I then sealed both the adapter and the reinforcement plate with gutter sealant, gluing them in place. My timing was perfect, because the gutter sealant instructions said to wait 24 hours—a driving rain happened 26 hours later. End results: great!
Scritto da: Goldens
Was exactly what we needed
Great fit for our rain chain
Scritto da: Meche
Larger adapter plate very helpful!
This Monarch rain chain install kit was just what I needed for my older gutters. The adapter piece on its own was not big enough to cover the shape and size of my gutter outlet so I put the larger plate through the top hat and glued them together with roof cement then dropped it through the gutter outlet and sealed in place. Kudos to the Monarch manufacturer for furnishing different size plates. I also like that the material is powder coated aluminum because the copper type would cause a corrosive reaction. Photos attached
Scritto da: Amazon Customer
Seems sturdy
I think some water leaks around from the sides but I guess it doesn't make a difference. It seems sturdy enough and u hooked a rain chain that was kinda heavy. Worked well for me.
Scritto da: Robert D.
Necessary to attach chain to gutter.
There were no instructions. Basically you will need a 2" hole saw to punch a hole in the bottom of the gutter. The adapter will just fit through thru. There is no way to attach or seal it to the bottom of the gutter. I used some silicone caulk to seal it and then drilled holes at each end of the adapter and screwed it to the gutter. The installation took 10 minutes - that is after I located a 2" hole saw, caulk and screws.
Scritto da: R S Cobblestone
Works great!
Works great with a Monarch Rain Chain link in my downspout!
Scritto da: JMLMT
Perfect and easy to install
This was so easy to install; drop it into place, and you're done after attaching the rain chain. It took me more time to remove the old spout (merely for aesthetics) and attach chain. A DIY project for sure
Scritto da: Francisco Garcia
Muy resistente
Todavia no lo instalo, pero es muy resistente
Scritto da: Leslie K.
Bad fit
They didn’t fit in my eves troughs. Totally useless and too late to return
Scritto da: Shannell
Superfluous to need
As above
Scritto da: Tinus
Good
Good system for rain chains
Scritto da: Judith A
easy to install addition to the rain chain
essential addition to the rain chain

Prodotti relatati

Skopri n-netwerk internazzjonali tagħna

Nibgħatu lejn 28 pajjiż, aktar minn 200,000 prodott. Ibqa' aġġornat, abbona man-newsletter.

Array