Kap Barbell Dumbbell u Kettlebell Storage Rack

Name: Kap Barbell Dumbbell u Kettlebell Storage Rack
Brand: CAP Barbell
SKU: 0702556219423
Availability: InStock

Brand:CAP Barbell

3.4/5

€

Il-3M DBI-SALA ExoFit X300 huwa ddisinjat għal dawk li jirrifjutaw li jikkompromettu. Iċ-ċineg X300 huma mgħammra b'komponenti ta 'kwalità għolja li ġew żviluppati biex itejbu s-sigurtà, il-konvenjenza u l-prestazzjoni għax-xogħol fl-għoli fuq is-sit tax-xogħol tiegħek. Ix-xedd ta 'kumdità X300 huwa mibni b'istrixxi tal-poliester ta' 6,000 lb, ikkuttunar robust ta 'kumdità ibrida tan-najlon/poliester b'pannelli 3M Scotchlite li jirriflettu, u ħardwer tal-aluminju ħafif. Teknoloġija ġdida fiż-żona tad-D-ring Dorsali tgħin lill-ħaddiema jagħmlu konnessjonijiet effiċjenti u jżommu l-arness bla periklu. L-aġġustament tat-torso li jissakkar u l-għażliet tal-bokkla li jaqbdu malajr huma disponibbli biex jottimizzaw l-esperjenza tal-adattament u tal-ħaddiem. Konfigurazzjonijiet magħżula huma wkoll disponibbli b'sistema esklussiva ta 'distribuzzjoni tal-piż biex tgħin tnaqqas it-tensjoni u l-għeja tal-ispalla. Il-firxa 3M DBI-SALA ExoFit ta 'arnessi tal-ġisem sħiħ hija mfassla biex tgħin biex tikseb l-aħjar aġġustament, funzjoni u effiċjenza filwaqt li tissodisfa r-rekwiżiti ta' sikurezza u prestazzjoni għax-xogħol li tagħmel kuljum. Hekk kif tkompli tgħolli l-aspettattivi u tilħaq għoli ġodda, l-ExoFit ġie elevat biex jgħin biex jitla’ miegħek. Ix-xedd ExoFit ikomplu jevolvu permezz ta 'riċerka ta' inġinerija u post tax-xogħol, ikkumplimentati minn avvanzi f'materjali u teknoloġiji ġodda. Qed nespandu l-għażliet tiegħek, u b'aktar minn 400 għażla ġdida ta' xedd minn fejn tagħżel, 3M DBI-SALA għandu dahrek u jista' jgħin lit-tim tiegħek jilħaq għoli akbar. Għolli l-arness tas-sigurtà tiegħek għall-ġenerazzjoni li jmiss ta '3M DBI-SALA ExoFit X100, X200, u X300 biex iżżomm il-forza tax-xogħol tiegħek komda f'postijiet skomdi.

Ammont

Żid mal-CART Ixtri issa

EAN: 0702556219423

Kategoriji Sports u Barra, Eżerċizzju u Fitness, Tagħmir għat-Taħriġ ta' Qawwa, Xtillieri tal-piż, Xtillieri Dumbbells,

TRUST - Esperjenza ta' fiduċja. Il-CAP ilha pijunier fl-industrija tal-fitness għal aktar minn 30 sena b’postijiet madwar id-dinja. Ċans, jekk qatt ħdimt qabel ma użajt prodott tal-PAK. FUNZJONALI – Iżomm sa ERBA’ pari dumbbells; L-ixtilliera tinkludi żewġ trejs għal ħażna addizzjonali ta 'tagħmir ta' fitness. VERSATILI - Dan ix-xtilliera jżomm il-biċċa l-kbira tad-dumbbells li jvarjaw minn 3-35 lbs. Uża t-trejs biex taħżen tagħmir tal-fitness bħal kettlebells, jaqbżu ħbula, jew ingwanti. DURABILTI - Il-bennieni tad-dumbbell mirqum bil-grommet tal-gomma u t-truf ta 'fuq u ta' isfel mirqum bil-gomma jipproteġu t-tagħmir u l-art mill-ħsara u jipprevjenu l-grif. KOSTRUZZJONI - Magħmula bl-Azzar Solidu. Id-dimensjonijiet immuntati huma 20. 5 L x 10 W x 24 H. Kapaċità ta 'piż ta' 300-libbra.

Brand	CAP Barbell
Brand Name	‎CAP Barbell
Customer Reviews	4.4 4.4 out of 5 stars 1,400 ratings 4.4 out of 5 stars
Included Components	‎Dumbbell and Kettlebell Storage Rack
Item Package Dimensions L x W x H	‎24.84 x 10.12 x 6.18 inches
Manufacturer	‎CAP Barbell
Material	Alloy Steel
Material	‎Alloy Steel
Model Name	‎RK-CB16H
Number of Racks	8
Package Weight	‎9.24 Kilograms
Part Number	‎RK-CB16H
Product Dimensions	10"D x 20.5"W x 25"H
Suggested Users	‎Unisex-adult
Warranty Description	‎30-day manufacturer's warranty
Weight Limit	300 Pounds

5 Star

4 Star

3 Star

2 Star

1 Star

Ikteb ir-reviżjoni tiegħek

L-email tiegħek mhux se tiġi ppubblikata. L-oqsma obbligatorji kollha huma mmarkati bi^*

Il-klassifikazzjoni tiegħek

Scritto da: Rachel C.

Looks great

Works great for keeping my weights and other equipment neatly stored. Not hard to assemble, just used a wrench to make sure everything was tightened properly.

Scritto da: Anthony

Solid. Meets expectations.

This rack is sturdy and meets expectations. No frills but does exactly what it says. As long as all of the bolts are tightened evenly, it is quite sturdy and stable. Assembly isn’t difficult but it does require a pair of pliers in addition to the included Allen wrench in order to fully tighten the bolts. I’m not particularly dexterous or handy and it took me just over an hour to assemble - not difficult but a bit tedious. Listen to a podcast or a favorite album while you do it and you’ll be fine. If you’re handy it’ll probably take you 20 minutes. I’m happy with the functionality and it’s pretty good looking also. Since I keep my weights in my living room, I much prefer this neat, compact, handsome look to a more traditional horizontal rack or leaving my weights on the floor (which is what I did before). The rubber edge covers for the exposed metal edges are a nice touch. It’s not perfect but I recommend it.

Scritto da: Pete W

It's really a 3.5 Star product. Would be better with moderate design changes.

I'm not unhappy with the product, just disappointed that it's not better designed to handle a wider variety of dumbbell types. If you have weights that fit, it's near perfect. If you don't, it might be a tough choice to decide to keep or return. The good: Nice looking, easy to assemble stand. It doesn't take up a lot of space and will allow you to store more than just dumbbells. I have a kettle bell and some bands and ab wheel on the shelves. This is a big improvement in keeping things that used to be lined up on a wall better organized. This stand give more flexibility than the A-frame dumbbell stand I was going to get. Probably best for dumbbells 30# or less. The bad: Can't fit my 40# & 30# kettlebells on the bottom shelf, it's just a little to small, but this is not a deal breaker. I don't feel safe with the 30# on the top because mine is on some more plush carpet and it just feels too wobbly, even with almost 80# total at the base. If it was a hard surface, I'd probably feel better. Most disappointing is that the dumbbell holders are really designed for dumbbells without coating (foam, silicone, et.). over the bar The holders are really best for Hex style or non-coated dumbbells. CAP seems to have designed this assuming you are only going to buy their dumbbells. Seems that with small modifications to the design they could have a more flexible stand. The product is good, almost great, and not amazing. The 4 star rating is me being a little bit generous. I also see some bubbling in the shelf pieces coating as others have mentioned, looks like a quality control issue, but I'm not too worried about. My recommendation is that if you have bare or rubber-coated end hex weights plus some other gear, this would be a great option. If you want to used fully coated weights, double check to see if they will fit the holders. Look at some of the photos posted here where people have had success and failure. My lighter weights, that have full coating, can be jammed in enough I'll live with it. With heavier weights (more than 10#) I would't risk it. I can live with the flaws in the design and might just buy some new weights over time. I prefer hex anyway.

Scritto da: Jenn

No issues with assembly.

I was nervous about assembly after reading reviews, but it is SO easy. One bolt and washer one one side, one nut and washer on the other side. Assembly will go MUCH faster if you have a ratchet and 1/2” bit. The hex key that comes with it is nice and heavy. Took about 30 minutes. We moved and my temporary gym is in our office for now. My big weight rack doesn’t fit in the office, so I just keep my most used ones on this new rack. I’m trading my 15lb neoprene dumbbells in for rubber capped ones because as most people stated, neoprene weights to not fit well. All in all pleased with the stand as a solution to keep the dumbbells off the floor while we plan out our new garage gym and I can have all my weights in one place again! One the side of the rack I have 25s, 20s, 15s, 12s. On the bottom shelf 5s and 10s. No wobble, very sturdy little holder. Will use the top to hold my water.

Scritto da: SMS9106

Good Product but installation needs attention.

I was hoping this would go on sale during Prime Days but alas it did not as there were several cheaper model product available. I opted for this one as it looked as built better and it is. Made with good solid parts, not terribly hard to install. My complaint is that the rubber trim strips do not stay on the bottom or top well and needed adhesive (3M Black Weather Strip Adhesive). Also as a tip: do not tighten down all the way until completely assembled as you will have an unlevel rack. Put weights on bottom to stabilize then use a level and tighten incrementally. Otherwise worth the price over the cheap models available. It could use a mobile base but a pretty nice product overall.

Scritto da: Noodle

Perfect for my space & Peloton Dumbbells!!

This weight rack was EXACTLY what I was looking for! It’s compact enough for the space I’m using, and super sturdy. It’s also perfect for Peloton dumbells! I read a lot of reviews about people’s concern with the instructions. It’s actually not that difficult to follow. ASSEMBLY PRO TIP: I highly recommend using a ratchet wrench with a 1/2” bit to tighten the nuts. Use the Allen wrench to hold the bolt will ratcheting the nut into place. It took me a total of 35 minutes to assemble the whole thing. So happy with this purchase!

Scritto da: Kristen Potvin

Excellent product

It takes a bit of time to put together but it is very sturdy. Fits dumbbells well and shelf at top and bottom is very sturdy, great for kettlebells. Great product, highly recommend!

Scritto da: Kristin

Great for hex dumbbells up to about 25lbs.

Fits my 10-25lb dumbbells perfectly. I’d guess anything bigger than 25lb likely wouldn’t fit correctly due to the way they sit in the grooves… but for what I needed it’s a great product. Holds all my equipment and is quite sturdy. Took me about 30min to put together, and you’ll need a wrench (or I used a screw driver with a socket application) to tighten the bolts, but the Allan key was included. All in all, I’m happy with the purchase and would recommend.

Scritto da: Heidi Arnkens

Good value

Pretty easy to assemble but a ratchet tool is a definite plus. It fits my vinyl cover dumbbells okay, although the holders are a little snug. But a great value for the money and I’m quite pleased with it.

Scritto da: Katrina

Great for price

Great addition to a home gym. Took about 40 mins to assemble and was a bit tricky, but I don't normally do this kind of work.

Scritto da: charlie29

Sturdy, but not universal fit

The quality is ok, it's sturdy enough, but not excellent. Neoprene hex weights don't fit (even small 8lbs) snug into the slots. Overall, it's basic, but not for a quality home gym. Love the shelf on the top and bottom, holds kettleball and ankle weights!