Il-grupp Hillman 2511 1/4-20 x 5/16 x 3/4 pulzier Brad Hole Tee Nut, 13-Pakkett

Name: Il-grupp Hillman 2511 1/4-20 x 5/16 x 3/4 pulzier Brad Hole Tee Nut, 13-Pakkett
Brand: ‎Hillman
SKU: 0008236020175
Availability: InStock

Brand:‎Hillman

3.3/5

€

DESKRIZZJONI TAL-PRODOTT Assortiment ta 'varjanti ta' prong, brad hole, u rettangolu tee nut minn The Hillman Group. Il-ġewż tat-tee jipprovdu mod faċli biex jitqiegħdu ħjut tal-azzar fl-injam u jipprovdu l-akbar ammont ta 'reżistenza għall-ġbid tat-tipi kollha ta' inserzjoni bil-kamin. Varjanti inklużi f'dan l-assortiment ivarjaw minn #6-32 sa 3/8-16 f'daqsijiet ta 'ħajt fin u oħxon u minn 9/16 sa 1 fl-għoli. Assortiment sħiħ fih erbatax-il (14) mili magħmulin minn numri tal-oġġetti Hillman #2501 - #2514. MILL-MANIFATTUR Brad Hole Tee Nuts daħħal ħjut tal-azzar fuq l-injam. Fihom toqob brad u għandhom jitwaħħlu bl-użu ta 'imsiemer brad żgħar. Tee Nuts huma ddisinjati biex iħallu wiċċ flushing kemm f'injam iebes kif ukoll artab. Il-ġewż joffru bażi ċatta bi projezzjonijiet tal-prong li jimxu paralleli mal-kanna.

Ammont

Żid mal-CART Ixtri issa

EAN: 0008236020175

Kategoriji Industrijali u Xjentifiċi, Imsiemer, Viti u Qafliet, T-Ġewż,

Finitura miksija biż-żingu. Reżistenti għall-korrużjoni. 1/4-20 ħjut.Uża f'injam iebes u artab biex tħalli wiċċ flushing. Finitura taż-żingu għal reżistenza għall-korrużjoni mtejba. Dawn il-ġewż tat-tee tat-toqba tal-brad għandhom ħajt oħxon 1/4-20 u jkejlu 5/16 wiesgħa x 3/4 għoli.13 biċċiet għal kull pakkett bl-imnut. Varjanti inklużi jvarjaw minn 9/16 sa 1 fl-għoli. Il-varjanti inklużi jvarjaw minn #6-32 sa 3/8-16 f'daqsijiet ta 'ħajt fin u oħxon. L-assortiment sħiħ jinkludi tipi ta 'ġewż ta' prong, toqba brad, u rettangolu tee biex jaqdu l-aktar applikazzjonijiet meħtieġa. Uża f'injam iebes u/jew artab biex iżżomm wiċċ fluxx.

Accessory Connection Type	‎Flange
Assembled Diameter	‎0.31 Inches
Batteries Included?	‎No
Batteries Required?	‎No
Brand	‎Hillman
Certification	‎An
Color	Zinc
Color	‎Zinc
Country of Origin	‎China
Customer Reviews	4.2 4.2 out of 5 stars 112 ratings 4.2 out of 5 stars
Cutting Diameter	‎0.31 Inches
Domestic Shipping	Item can be shipped within U.S.
Exterior Finish	Zinc
Exterior Finish	‎Zinc
Fastener Type	Screw Mount
Fastener Type	‎Screw Mount
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Item Dimensions LxWxH	‎2.5 x 1.2 x 1.5 inches
Item model number	‎2511
Item Package Quantity	‎1
Item Weight	‎0.22 Pounds
Item Weight	‎3.52 ounces
Manufacturer	‎The Hillman Group
Material	Steel
Material	‎Steel
Measurement System	‎Inch
Metal Type	‎Zinc
Part Number	‎2511
Product Dimensions	‎2.5 x 1.2 x 1.5 inches
Size	‎1/4"-20 x 5/16" x 3/4"
Special Features	‎Assortment
Thread Coverage	‎Fully Threaded
Thread Size	1/4"-20
Thread Size	‎1/4"-20
Thread Style	‎Right Hand
Usage	‎Wood

5 Star

4 Star

3 Star

2 Star

1 Star

Ikteb ir-reviżjoni tiegħek

L-email tiegħek mhux se tiġi ppubblikata. L-oqsma obbligatorji kollha huma mmarkati bi^*

Il-klassifikazzjoni tiegħek

Scritto da: Amazon Customer

Thank you so much!

Thanks to who ever corrected my order. I did a lot of reasearch and measuring to learn that these T-Nuts were the answer to getting my project just right. Amazon delivered my order to someone elses house and, I needed these T-Nuts really bad. All is forgiven because these nuts are perfect. The other choice I was looking at before I found these nuts were going to cost me $7.85 each and, I needed 24 of them. I almost paid $188.40, plus Taxes and shipping for those nuts and that would have made me a real NUT.

Scritto da: T. Macy

Item received does not match picture.

These are just standard Zinc Tee Nuts that are available at almost any hardware store, and not the Oiled Brass item in the picture.

Scritto da: Tin Nguyen

Can mount anywhere . Too small

Very light duty. I think I can’t handle anything more than 2 pounds

Scritto da: Vintner Don

They are tiny, but are as designed.

These did not fit the application where I wanted to use them. Not that the parts are bad. They are fine as designed, but I had misunderstood the dimensions and thought it was larger base. I would be concerned about the small surface and just brad holes to secure this in place. The legs should be short and not be dragged or this could break out of the mounting.

Scritto da: Wilber

Great for casters on a trundle bed.

I used nine of these for mounting casters on the trundle bed I built. I was a little surprised at how small they were, because the image makes them look so much bigger, the brad holes especially. But they mounted fine and the casters screwed into them fine and they seem to be holding up fine. So I have no problem with them at all. I ended up using screw nails for mounting them to the frame. Hopefully they never come out. I feel pretty confident they'll last at least as long as the bed will.

Scritto da: Lars F

Does what its supposed to do...

Amazing what you can use to get a job done. I used this to restore a rear automotive wing from the 80's

Scritto da: Dave

Four Stars

Prompt delivery and well made.

Scritto da: Frankie

A little confusing

The third number is the screw diameter. I bought the wrong ones. I intend to rebuy the right size. They seem like good quality fasteners