Highcraft PXBND12-10 PEX Appoġġ tal-liwja 1/2 pulzieri, Hanger tal-pajpijiet tat-tubi tal-ħajt 90 Grad bi pjanċa tad-dwiefer, Polyethylene (10 Pack), Iswed 1/2 pulzieri.

Name: Highcraft PXBND12-10 PEX Appoġġ tal-liwja 1/2 pulzieri, Hanger tal-pajpijiet tat-tubi tal-ħajt 90 Grad bi pjanċa tad-dwiefer, Polyethylene (10 Pack), Iswed 1/2 pulzieri.
Brand: Highcraft
SKU: 0804595354797
Availability: InStock

Brand:Highcraft

3.5/5

€

✔IR-RIVOLUZZJONI PEX: PEX Huwa L-Għażla Preferuta Għall-Provvista ta 'Ilma U Applikazzjonijiet ta' Tisħin Idronic, Jidhru Spejjeż Mnaqqsa, Installazzjoni Aktar Mgħaġġla, Flessibilità, Durabilità, Reżistenza għall-Ffriżar U Reżistenza għall-Korrużjoni! !. ✔DIMENSJONIJIET: 5 pulzieri Twil, Taqbel 1/2 pulzieri PEX Pajp, bi Pjanċa tad-dwiefer b'2 Toqob imtaqqbin minn qabel (Imsiemer Mhux Inklużi). ✔KOSTRUZZJONI TAL-PLASTIK LIXX: Tnaqqas il-Ħsejjes, Vibrazzjoni, Kinks, Liwi Żejjed u Restrizzjoni tal-Fluss tal-Ilma. ✔INSTALLAZZJONI FAĊLI: Naqqas l-Ispejjeż tax-Xogħol b'mod sinifikanti b'dan l-appoġġ ta 'l-angolu PEX ta' Prestazzjoni Għolja. Ebda Għodda, Saldjar, Jew Crimping Meħtieġa. Dwiefer Eżatt Il-Pjanċa tal-Immuntar Mal-wiċċ (Toqob Mtaqqbin minn qabel Għal Konvenjenza Miżjuda), U Ikklikkja It-Tubi PEX Fit-Fitting. Huwa Faċli daqshekk! Jistgħu jitneħħew u jerġgħu jintużaw Ħinijiet multipli. ✔ HANGER PEX FIT ULTRA SIGUR: Jipprovdi Appoġġ tal-Liwja Riġidu ta '90° għal Tubi PEX li jimxu Ħdejn Ħajt jew Raġġ.

Ammont

Żid mal-CART Ixtri issa

EAN: 0804595354797

Kategoriji Għodda u Titjib tad-Dar, Plumbing mhux maħdum, Pajpijiet, Fittings tal-pajpijiet u Aċċessorji, Appoġġ tal-pajpijiet,

Batteries Required?	‎No
Color	‎Black
Country of Origin	‎China
Customer Reviews	4.5 4.5 out of 5 stars 278 ratings 4.5 out of 5 stars
Item model number	‎PXBND12-10
Item Package Quantity	‎1
Item Weight	‎6.7 ounces
Manufacturer	‎Highcraft
Part Number	‎PXBND12-10
Product Dimensions	‎5 x 0.5 x 0.5 inches
Size	‎1/2 in.

5 Star

4 Star

3 Star

2 Star

1 Star

Ikteb ir-reviżjoni tiegħek

L-email tiegħek mhux se tiġi ppubblikata. L-oqsma obbligatorji kollha huma mmarkati bi^*

Il-klassifikazzjoni tiegħek

Scritto da: Xerocool

perfect

no fails or issues. works as it should

Scritto da: Stephen P. Berzins

Not as pictured. What I received was like most of the her ones, attachment inside the bend.

Worked fine, but ordered this 10 pack instead of just two I needed only because I wanted the different attachment point, on top, not under the the bend. But, in the end they worked just fine

Scritto da: DustStorm

3/4 inch PEX is very, very, very, very, very, very, very hard to bend 90 degrees!

Obviously, most important part of using these supports is to be able to bend the PEX piping. It seems that everyone who deals with PEX espouses the virtues of its flexibility, which of course is true. But, working by myself, I found the reality of bending ¾” PEX to a 90° angle virtually impossible. I gave up, found that I could make due with less sharp turns. (I give 5 stars because I couldn’t use the supports! Returned.)

Scritto da: Bugs

Considering how easy this break, you may want to be sure you order some extras

Maybe its that were a little bit stronger than they are, but it did surprise me when the second one snapped. Get extras so you’re not stuck without finishing your work.

Scritto da: Michael Maddux

These are needed

These work well for molding pex into a turn. The pex is flexible but it has a memory and try to return to its original shape. These hold it into shape even if you need to make a turn without needing to secure it.

Scritto da: WilliamB

Good if you add a little heat and aren't rough.

Broke the first one trying to make a bend on pex at about 68F. I used a heat gun to gently warm the pex and was able to get 4 on without much issue. It was critical to hold the pipe at the 90° angle until it cooled a little or it would extend to around 110°. Not bad, but not at strong as the metal ones from sharkbite. The mounting holes worked well.

Scritto da: PigPen4x4

Not rigid...

Whether these are good or not depends on your expectations. I needed a pretty tight bend and the metal style would hold this very well. These being plastic, have some give so the bend is more like 75-80 degrees (I dunno, didn't measure) rather than 90. Many places these will be OK, others not so much.

Scritto da: Wayne Richardson

Weak plastics

I purchased 1 pack of 10 and started to install them. The first two installed properly, the next two snapped when I was trying to insert the pipe. These plastic supports don't give much support, and snap too easily. I will not purchase again.

Scritto da: Robert Marin

Light and snap well

I had a few break on me

Scritto da: KM Purcell

They seem to make a bit too small of a circle. But I am sure it will work fine.

It is very sharp on the edges. I have to learn how to use properly. It can mark up or scratch the pex very easily. But I have never used this type. So, I'm a newbie..