HHIP 2000-0385 Steel HSS Round Tool Bit, 3/8 x 5 3/8 x 5 Round Shape

Name: HHIP 2000-0385 Steel HSS Round Tool Bit, 3/8 x 5 3/8 x 5 Round Shape
Brand: HHIP
SKU: 0769053004440
Availability: InStock

Brand:HHIP

3.6/5

€

Sunlite 4-gang Swiċċ dekorattiv u pjanċa tar-reċipjent Iffurmat fil-lewż minn plastik li ma jkissirx li se jirreżisti t-tgħawwiġ, fading u skulurazzjoni maż-żmien Wiċċ lixx u truf fit-tond jirreżistu l-ġbir tat-trab Jinkludi viti tal-metall imqabbla bil-kulur UL Listed Standard Daqs 4-gang (4 6 pulzieri għoli 8 2 pulzieri wiesgħa 0 2 pulzieri fond)

Ammont

Żid mal-CART Ixtri issa

EAN: 0769053004440

Kategoriji Industrijali u Xjentifiċi, Għodda tal-Enerġija u tal-Idejn, Power Tool Partijiet u Aċċessorji, Power Drill Partijiet u Aċċessorji, Twist Bits, Drill Bits, Jobber Drill Bits,

Piż tal-Pakkett: 0.068 kilogrammi. Pajjiż ta 'Oriġini: Iċ-Ċina. Azzar b'Veloċità Għolja. Forma: Tonda.

Country of Origin	China
Item model number	2000-0385
Manufacturer	HHIP
Product Dimensions	3 x 1 x 6 inches; 0.79 Ounces

5 Star

4 Star

3 Star

2 Star

1 Star

Ikteb ir-reviżjoni tiegħek

L-email tiegħek mhux se tiġi ppubblikata. L-oqsma obbligatorji kollha huma mmarkati bi^*

Il-klassifikazzjoni tiegħek

Scritto da: BMoore

Good HSS

Used this making custom tools for my shop and it worked great.

Scritto da: JTF

3/8 x 5 HSS Rod - Pretty Good

The 3/8 x 5 HSS rod I received is good. Finish is very good and ends were cut pretty square. Comes sealed in plastic with a lot of oil. Can't tell you how good the steel is yet. Only thing is that this rod is really 9.5mm which is only 0.3740 inches. It's okay for my use but if you need that last 0.001" it might not work for you. I base this on a sample of one.

Scritto da: Michael J

Fine for my use

I bought this to grind into a one-point tool for woodturning. I’m pleased with the quality and hardness. Tolerances are more than adequate for my application.

Scritto da: Running RN

there is a 10 degree cut in the tool on both edges. Picture is of a 90 degree edge

Perfect piece of tool steel. The 4 star is because the picture is of a 90* on the edge of the tool steel. Turns out the piece I received has a 10* cut off the end on both sides. Not the end of the world but not the picture. The description does state that there is a 10* edge so I guess I should have read the description better.

Scritto da: Robert Novak

Buyer beware - it comes pre-hardened

Nowhere in this ad does it list that the blank would come pre-hardened, but mine did. I'll say one thing, they did a damn fine job hardening it. It is easily HRC 65+ all the way through, throughout the entire length. Took quite a while to grind to the shapes I needed. Ultimately, it's ok, I used it to make a broach for cutting keyways, pretty useful actually since it is hardened it seems to last just fine even cutting through tool steel, but it still would have been nice to know that it was going to be already hard.

Scritto da: Doug Hopkins

Worked great

Worked great

Scritto da: Cloudsmoker

Meets my precision requirements.

My readings indicate deviations of about .00015” runout from diameter and less than .001” on straightness. Planning to try the bars as well

Scritto da: Rodney L.

Just what I was looking for!

It's a chunk of steel that does a chunk of steel things. lol

Scritto da: Robert Boswell

Exactly as described

Using it as a parrelle bar