Freud 77-204: 3/8 (Dia.) Bit ta 'Kompressjoni Doppja b'3/8 Shank 3/8-Inch Dijametru b'1-1/8-Inch Għoli Bit ta' Kompressjoni Doppja b'1/4-Inch Shank

Name: Freud 77-204: 3/8 (Dia.) Bit ta 'Kompressjoni Doppja b'3/8 Shank 3/8-Inch Dijametru b'1-1/8-Inch Għoli Bit ta' Kompressjoni Doppja b'1/4-Inch Shank
Brand: Freud
SKU: 0008925059813
Availability: InStock

Brand:Freud

3.4/5

€

Il-Decora Companion Switch huwa ddisinjat għal applikazzjoni f’diversi postijiet u għandu jintuża biss meta jkun imqabbad ma’ Leviton Decora Smart jew Decora Digital swiċċ li jippermetti li d-dawl jiġi kkontrollat minn aktar minn post wieħed. Id-dawl tal-lokalizzatur LED jagħmilha faċli li wieħed isib fid-dlam u d-dehra stylish tiegħu hija kompatibbli ma 'apparati Decora u wallplates oħra ta' Leviton (mibjugħa separatament). Wiċċ abjad immuntat fuq apparat bi pjanċi tal-wiċċ tal-avorju u lewż ħafif inklużi. Ibdel il-kulur tas-swiċċ fi kwalunkwe ħin billi tordna kit ġdid għall-bidla tal-kulur tal-pjanċa tal-wiċċ (DDKIT-S). Il-kuluri tal-pjanċa tal-wiċċ jinkludu abjad, avorju, lewż ċar, griż, iswed u kannella.

Ammont

Żid mal-CART Ixtri issa

EAN: 0008925059813

Kategoriji Għodda tal-Enerġija u tal-Idejn, Power Tool Partijiet u Aċċessorji, Partijiet u Aċċessorji tar-router, Bits tar-router, Straight, Spiral & Trim Bits, Spirali,

Iswed I.C.E. + Freud TiCo Hi-Density Carbide = 2X żieda fil-ħajja u l-prestazzjoni vs. bits standard mhux miksija. Freud Premier Solid Carbide. Iswed I.C.E. kisi għat-tarf tat-tqattigħ frisk u evakwazzjoni taċ-ċippa superjuri. Għaqqad l-azzjoni ta 'qtugħ ta' shear up u down shear. Qatgħat nodfa, mingħajr ċippa f'materjali b'żewġ naħat. Specs: Numru ta 'Cutters 2, Dija Ġenerali. 3/8, Tul Ġenerali 3, Shank Dia. 3/8, Għoli tal-Karbur 1-1/8, Tul Upcut 11/32.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Freud
Color	‎Multi
Customer Reviews	4.4 4.4 out of 5 stars 38 ratings 4.4 out of 5 stars
Included Components	‎Compression Router Bit
Item model number	‎77-204
Item Package Quantity	‎1
Item Weight	0.15 Pounds
Item Weight	‎2.4 ounces
Manufacturer	‎Freud
Material	Carbide
Material	‎Carbide
Measurement System	‎Inch
Part Number	‎77-204
Product Dimensions	‎1 x 1 x 4 inches
Size	One Size
Size	‎One Size
Style	‎3/8-Inch Diameter by 1-1/8-Inch Height Double Compression Bit with 1/4-Inch Shank
Warranty Description	‎Freud Limited Tooling Warranty. Contact Freud customer service for more details. 800-334-4246

5 Star

4 Star

3 Star

2 Star

1 Star

Ikteb ir-reviżjoni tiegħek

L-email tiegħek mhux se tiġi ppubblikata. L-oqsma obbligatorji kollha huma mmarkati bi^*

Il-klassifikazzjoni tiegħek

Scritto da: crushed

Fantastic Bit

What a wonderful piece of equipment. Cuts absolutely clean edges and bottoms effortlessly. Unfortunately, I broke it after one week of use, purely out of my own improper handling. I have read many people saying not to push carbide bits too hard. Tried making a half inch plunge through 3/4" piece of plywood and there it went. Ruined the bit, the plank and my expensive jig. But I would buy again and this time take much shallower cuts. Lesson learnt the expensive way. But I am glad no major mishap occurred.

Scritto da: J. Gadling

... it for - cuts cleanly through plywood with 99% perfect edges and no surface marring

This bit does exactly what I bought it for - cuts cleanly through plywood with 99% perfect edges and no surface marring. We used it to cut 1/2" and 3/4" finished maple plywood on a ShopBot and saw a small amount of surface tearout with a nearly new bit - went back and checked the settings, and we'd accidentally made the first pass 1/4" deep - if cutting in multiple passes, the first pass needs to be >1/4" deep (we went with 3/8) so you're cutting the top surface with the "DOWN" part of the bit. The first 1/4" is the UP part. After taking care of that everything went smoothly.

Scritto da: Matthew Holcombe

Great Bit but be Aware

I purchased two of these bits for use in my small home shop. They cut through 3/4 double sided melamine like butter with no chipping. One word of caution though. As opposed to other similar bits I've used, these leave small grooves in the material they cut through. The teeth are offset from one side to the other so I'm not sure why the groove is left. It is a recessed groove so if you are taping the edge or mating it with another piece of wood it would never show, and it may provide a channel for glue to settle into. However, if you are planning on leaving the edge raw for some reason, the grooves will show.

Scritto da: Shawn G.

Cuts super clean but breaks very easy

I love the way this cuts, it cuts super clean, quiet and it produces small chips and instead of fine dust. The bad is its really weak and breaks very easy. I used it for nesting and I cut 8 sheets and a small part moved which broke the cutter my other cutters I use would have just kept going. I cut another 5 sheets and the same thing happened so I was pretty disappointed since I use a lot of Freud blades and bits I had high expectations for this bit.

Scritto da: Dovetail

Great bit and I don't have to make such a ...

Great bit and I don't have to make such a deep initial plunge. Many compression up/cut buts have such a large up cut portion on the bottom of the bit an initial plunge of more than a 1/4" is needed or it will burn the wood. With this bit you barley need more than an 1/8" initial plunge and no burning!

Scritto da: Steve S

Does what it should

Works great no problems. Cuts 3/4” plywood in one pass for cabinet parts.

Scritto da: jesse

On shallow mortises (1/4") this leaves some tearout on the surface.

On shallow mortises (1/4") this leaves some tearout on the surface. I've had to plane the boards down ~1/16th of an inch to get back to a clean surface.

Scritto da: Thomas W. Disanto

First time I have used the "double compression" bit. ...

First time I have used the "double compression" bit. Since using it I will probably not go back to using any other type of bit. It is "perfect."

Scritto da: wackocrash5150

Not bad, but not super.

Bought this bit for my CNC router so I didn't have to change bits from downcut to upcut when cutting through sheet goods. It does an excellent job on the top and bottom surface cut and does exactly what it's supposed to with pretty much no tear-out once you get the depth set up. The problem is the edge surface; it leaves a small ridge where the bit transitions from upcut to downcut. Nothing that a flush trim router bit on my router table can't handle but that more than negates the time saved from one less bit change. I love Freud bits and will continue to buy them, just maybe not their compression bits; especially for the price.

Scritto da: Richard P.

Grande qualité de coupe

Très bonne performance de coupe de plywood et Mélanie. Fini parfait des deux côtés