Freeman P2PFFK Kit Pnewmatiku Professjonali tal-Fooring Nailer (2 biċċa), Iswed

Name: Freeman P2PFFK Kit Pnewmatiku Professjonali tal-Fooring Nailer (2 biċċa), Iswed
Brand: Freeman
SKU: 0816376011553
Availability: InStock

Brand:Freeman

3.5/5

€

Il-Kit tal-Freeman P2PFFK Professional Pneumatic Flooring Nailer Kit (2 biċċa) huwa ideali għall-kuntratturi tal-kostruzzjoni fuq il-post tax-xogħol kif ukoll DIYers fid-dar. Dan il-kit must have fih 3-in-1 15.5-Gauge u 16-Gauge 2 Flooring Nailer u Stejpler (PFL618C), u 4-in-1 18-Gauge 1-5/8 Mini Flooring Nailer u Stejpler (PFBC940 ). Il-Fooring Nailer u Stapler 3-in-1 jispara 16 gauge T-cleats u L-Cleats flimkien ma '15.5 gauge 1/2 crown staples, u huwa ddisinjat speċifikament għall-installazzjoni ta' 1/2 sa 3/4 injam iebes tal-ilsien u tal-kanal solidi art. Ix-xafra tas-sewqan ta 'biċċa waħda hija magħmula minn azzar imwebbes għal durabilità, filwaqt li l-korp huwa mibni minn aluminju fondut die ħafif. Żewġ pjanċi bażi interkambjabbli no mar jipprovdu stabbiltà għal dan il-nailer u l-stepler tal-art li jaħdmu bl-arja u jiżguraw riżultati professjonali billi jipprevjenu ħsara lill-uċuħ tal-art lesti. Il-Mini Flooring Nailer u Stapler 4-in-1 jispara dwiefer brad ta '18-il gauge u stejpils tal-kuruna dojoq, u l-bażi ta' 45 grad tagħmilha perfetta għall-installazzjoni ta '1/4 sa 1/2 art solida jew inġinerija. Neħħi faċilment is-sieq ta 'l-art, u din l-għodda b'ħafna għanijiet taħdem ukoll bħala brad nailer u stejpler għal xogħol ta' trim u finitura. Il-Kit Pneumatic Flooring Nailer Professjonali jinkludi mallet tal-fibreglass li jilħaq fit-tul b'qabda ikkuttunata, żejt tal-għodda tal-arja, u għodod ta 'aġġustament, u huwa kopert mill-Garanzija Limitata ta' 7 Snin u Garanzija tal-Partijiet li jintlibsu ta '90 Jum ta' Freeman.

Ammont

Żid mal-CART Ixtri issa

EAN: 0816376011553

Kategoriji Għodda u Titjib tad-Dar, Għodda tal-Enerġija u tal-Idejn, Għodda tal-Enerġija, Kits Combo,

Il-kit jinkludi mallet tal-fibreglass li jilħaq fit-tul b'qabda kkuttunata, (2) pjanċi tal-bażi interkambjabbli, żejt tal-għodda tal-arja, u għodod ta 'aġġustament. 4-in-1 Mini Flooring Nailer u Stapler: Aġġusta fond mingħajr għodda; Ċilindru u magazin ta 'l-aluminju anodizzat; Xafra tas-sewqan ta 'biċċa waħda ta' azzar imwebbes; Disinn ħieles miż-żejt; Korp inġinerija ergonomikament; Manku tal-qabda tal-kumdità; exhaust aġġustabbli 360 grad; Filtru tal-arja/għatu kontra t-trab. 4-in-1 Mini Flooring Nailer u Stejpler: Kompatibbli ma '18 gauge kolla kollated brad imsiemer minn 5/8 sa 1-5/8, u 18 gauge kolla kollated staples kuruna dejqa 1/4 minn 3/8 sa 1-5/ 8. 4-in-1 Mini Flooring Nailer u Stapler: Ideali għall-installazzjoni ta 'art solida jew inġinerija 1/4 sa 1/2 bit-twaħħil tal-bażi ta' l-art ta '45 grad, jew ittrimmja u temm ix-xogħol bil-kopertura regolari ta' l-imnieħer. 3-in-1 Flooring Nailer u Stapler: Kostruzzjoni durabbli; Ċilindru u magazin ta 'l-aluminju anodizzat; Xafra tas-sewqan ta 'biċċa waħda ta' azzar imwebbes; Manku ddisinjat ergonomikament; Ebda pjanċi bażi mar. 3-in-1 Flooring Nailer u Stejpler: Kompatibbli ma '15.5 gauge kolla kollated 1/2 kuruna staples, 16 gauge kolla kollated T-cleats, u 16 gauge kolla kollated L-cleats minn 1-1/2 sa 2 għat-3 tipi kollha ta' qfieli. 3-in-1 Flooring Nailer u Stapler: Ideali għall-installazzjoni ta '1/2 sa 3/4 art ta' l-injam iebes ta 'l-ilsien u l-kanal solidi.

Batteries Required?	‎No
Color	‎Black
Country of Origin	‎China
Customer Reviews	4.5 4.5 out of 5 stars 95 ratings 4.5 out of 5 stars
Included Components	‎
Item model number	‎P2PFFK
Item Package Quantity	‎1
Item Weight	‎20.9 pounds
Manufacturer	‎Prime Global Products
Material	‎Aluminum body with heat-treated steel parts
Measurement System	‎Imperial
Part Number	‎P2PFFK
Power Source	‎Air Powered
Product Dimensions	‎16.75 x 3.5 x 22.75 inches
Warranty Description	‎Covered by Freeman's 7 Year Limited Warranty and 90 Day Wearable Parts Warranty

5 Star

4 Star

3 Star

2 Star

1 Star

Ikteb ir-reviżjoni tiegħek

L-email tiegħek mhux se tiġi ppubblikata. L-oqsma obbligatorji kollha huma mmarkati bi^*

Il-klassifikazzjoni tiegħek

Scritto da: Florin Hoxha

Solid Performance at a Fraction of the Price!

Let me just start by saying that I was not expecting how amazing these two nailers work. Beacuse of the price, I was expecting an average to above average set of flooring nailers, however they performed like champs. I used this set to install two different types of flooring- 3/4" Hardwood and 3/8" Strand Bamboo. My compressor used was a Bostich 135psi. The bigger gun, Freeman PFL618C, works best for hardwood flooring. I installed 1200 sq ft of 3/4" of hardwood without a single hickup. I used powernails 2" L-cleats and only rarely would it crack the tongue of the hardwood pieces. I mostly used a PSI or 90-100. It is a bit hard to when you get to the corners of the room so for that I used 1-5/8" brad nails on the smaller gun, PFBC940, to get the corners and the floor had no movement. It came out great. I had used the Bostich Flooring Nailer before and this Freeman was of the same build quality and performance at a fraction of the price. Make sure you lube it with the oil provided in the beginning of the project. Just 2-3 drops should do it when put in the. The smaller gun, PFBC940 is a multi use gun. It can be used as finish nailer or flooring nailer. (Side note: I have not tried the gun with staples). I used Powernails 1-5/8" brad nails for trim, moulding and bamboo flooring. I used it to install about 2800 sq ft of 3/8" strand bamboo, which is very strong. I nailed about 4-5 bards on each plank (about 6-8" apart). There was no issues in this project either. The small size of the nails and the high performance of the Freeman gun, made the project a breeze. Don't forget to lube the gun before starting the project. I recommend 2-3 drops of oil for each full day of use. I mostly used a PSI of 80-90 on the compressor. The small gun, PFBC940, also transformed easily to use as a straight nailer to install trim and moulding. I finished most of the house with this gun but then used a 2.5" nailer for some door trim that needed longer nails. I wish this gun would take longer brads for moulding and trim. Again, for this price as a set, its about 50% cheaper than buying them seperate. PFL618C is around 1/3 of the price of the Bostich, the most common among contractors. For the same price as renting a gun from Home depot for a few days, its worth buying this and using it again and again. It comes with a 7 year warranty so I feel confident this will last. I highly recommend this set.

Scritto da: JNJ Construction

Works beautifully

Usually use bosch but needed another spare set and figured to give it a try and I was surprised as this set actually worked a little better than my other nailers. We laid 500 sq ft of red oak flooring and every nail and piece sunk and was drawn in beautifully.

Scritto da: David Goplin

Commercial Contractor use rating

I’m a remodeling contractor for 28 years, my Bostich flooring staplers (which I really liked) were stolen so I needed to replace them. This product seemed to have good reviews plus for the same comparable cost this package included the smaller stapler which I also needed replacement. Though I have yet to use the small stapler, the larger stapler has been funtioning great! I like it

Scritto da: Tony

The best!

I can't say enough about this product. Made my job so easy.

Scritto da: Sawdustmaker

... used these on a job already and am really pleased with the quality of the guns and hammer

Have used these on a job already and am really pleased with the quality of the guns and hammer. I've been in the business of woodworking for over 40 years....so when I say they are good and worth the money....it comes with experience with the work as well as the tools. Can't go wrong with what they cost. Actually got rid of guns that cost as much as these do for the pair because I prefer them to the others.

Scritto da: Tony S.

Freeman combo

Great set for the price. I installed about 300' of Hickory which is quite hard and the cleat nailer never miss fired one time. Easy to load and use. Comes set up for 3/4" flooring with a 1/2" shoe included. The 18 gauge staples would not go through the Hickory. They bent and twisted instead. The gun works fine but the wood was too hard for the light gauge staples. Good purchase...

Scritto da: 1hot56chevy

Great for DYI

Easy to use great product. Great quality

Scritto da: C. Graves

Works Well

Works well but the extender handle broke when I finger tightened it. I used it with the extender handle and it did the job but put a lot of strain on the lower back. Other than the pore design on the extender handle I was happy with the nail gun.

Scritto da: Richard

I really like the flooring nailer works very well,

I really like the flooring nailer works very well, I've used it with "L" nails and the staples 1-3/4" and 2" works well. the brad nailer wont work at all for me tried nails and staples just wont send them . I may have it set up wrong as there are no directions for it but I don't think that's the problem.