Enbrighten, White & Light Lewż, GE Z-Wave Plus Smart Motion Light Dimmer, Jaħdem ma' Alexa, Google Assistant, SmartThings, Wink, Zwave Hub Meħtieġa, Ripetitur/Range Extender, Kompatibbli 3-Way, 26933

Name: Enbrighten, White & Light Lewż, GE Z-Wave Plus Smart Motion Light Dimmer, Jaħdem ma' Alexa, Google Assistant, SmartThings, Wink, Zwave Hub Meħtieġa, Ripetitur/Range Extender, Kompatibbli 3-Way, 26933
Brand: Enbrighten
SKU: 0030878269339
Availability: InStock

Brand:Enbrighten

3.2/5

€

Poġġi l-awtomazzjoni tad-dar f'moviment bl-Enbrighten Z-Wave In-Wall Smart Motion Dimmer. Meta mqabbad ma 'hub kompatibbli, id-dimmer intelliġenti bil-wajer iħaddem dwal tas-saqaf, attrezzaturi tal-ħajt u aktar permezz ta' kmandi individwali u settings programmati. Ikkontrolla u skeda bla fili attrezzaturi ta 'ġewwa jew ta' barra għal ġestjoni mingħajr sforz tad-dar tiegħek. Il-possibbiltajiet ta 'awtomazzjoni tiegħek huma apparentement infiniti meta konnessi ma' hubs minn Wink, SmartThings, Home Seer, Vera, Nexia u aktar.

Ammont

Żid mal-CART Ixtri issa

EAN: 0030878269339

Kategoriji Għodda u Titjib tad-Dar, Elettriku, Swiċċijiet u Dimmers, Swiċċijiet tal-ħajt, Swiċċijiet Dimmer,

INSTALLAZZJONI FAĊLI - Teħtieġ installazzjoni ta 'ġewwa fil-ħajt b'konnessjonijiet bil-wajer. WIRE NEWTRALI MEĦTIEĠ. Jinkludi buttuni bojod u ħfief għall-kopertura tal-lewż (pjanċa tal-ħajt mhux inkluża). Kapaċità ta 'dim ta' firxa sħiħa għall-użu ma 'LEDs u CFLs dimmable kif ukoll bozoz inkandexxenti u aloġeni. Wattage appoġġjat - 600W inkandexxenti; 150W LED/CFL. Vultaġġ appoġġjat - 120VAC. Firxa tat-temperatura operattiva 32-104 grad Fahrenheit. KOPERTURA SĦIĦA TAD-DAR - Z-Wave Plus jaħdem mal-ġenerazzjonijiet Z-Wave kollha preċedenti biex jippermetti espansjoni kontinwa tan-netwerk ta 'awtomazzjoni tad-dar tiegħek. Id-dimmer huwa kapaċi jikkontrolla attrezzaturi ta 'ġewwa jew ta' barra għall-awtomazzjoni tad-dar kollha u jirrepeti s-sinjal Z-Wave tiegħek mill-hub tiegħek jew apparat ieħor biex jestendi l-firxa tiegħek sa 150ft. Firxa estiża tas-sinjali żżid il-kopertura tal-awtomazzjoni tad-dar tiegħek biex ittejjeb il-kontroll tiegħek. 3-WAY READY - L-apparat intelliġenti jaħdem perfettament waħdu jew jintegra bla xkiel f'setups b'ħafna swiċċijiet bi swiċċijiet add-on meħtieġa - mudelli 12723 jew 46199. Sa erba 'swiċċijiet add-on jistgħu jiġu konnessi mal-istess apparat. AGĦŻEL KONTROLL TAL-MOZZJONI - Id-dimmer jaġġusta l-livelli ta 'luminożità ta' dwal LED, CFL, inkandexxenti u aloġeni li jistgħu jitbaxxew minn 0-100 fil-mija biex inaqqas l-ispejjeż tal-enerġija u jtejjeb il-ħajja tal-bozza. Ippersonalizza d-dimmer bi tliet għażliet ta’ skoperta ta’ moviment – okkupanza, post battal u manwal. Il-mod ta 'okkupanza jixgħel/itfi d-dwal awtomatikament, filwaqt li d-dwal jinxtegħlu manwalment u jintfew awtomatikament fl-issettjar tal-post battal. Biex tiddiżattiva s-sensorju tal-moviment, agħżel it-tħaddim manwali. B'ħames għażliet ta 'żmien ta' time-out li jvarjaw minn ħames sekondi sa 30 minuta u kopertura ta 'skoperta sa 180 grad, id-dimmer jakkomoda kwalunkwe kamra b'ammonti varji ta' attività. Barra minn hekk, igawdu xeni personalizzati, skedar versatili u twissijiet konvenjenti b'operazzjoni remota u kontroll tal-vuċi meta tkun imqabbda ma 'hub kompatibbli. KONTROLL TAL-VUĊI - KOMPATIBBLI TA' ALEXA U GOOGLE ASSISTANT (jeħtieġ hub ċċertifikat Z-Wave). Jaħdem maċ-ċentri ċertifikati Z-Wave li ġejjin: SmartThings, Ring Alarm, Wink, ADT Pulse, ADT Command, Trane, Vivint, Nexia, Honeywell, Home Seer, Harmony Home Hub Extender, Vera u aktar.

Actuator Type	Push Button
Actuator Type	‎Push Button
Batteries Included?	‎No
Batteries Required?	‎No
Brand	Enbrighten
Brand	‎Enbrighten
Circuit Type	3-way
Circuit Type	‎3-way
Color	‎White & Light Almond
Connectivity Protocol	‎Wi-Fi, Z-Wave
Control Method	‎Voice
Controller Type	‎Nexia, Vera, Google Assistant, Amazon Alexa, SmartThings
Country of Origin	‎China
Customer Reviews	4.1 4.1 out of 5 stars 178 ratings 4.1 out of 5 stars
Included Components	‎1 In-Wall Sensor
International Protection Rating	IP00
International Protection Rating	‎IP00
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	1.5 x 1.5 x 3 inches
Item Dimensions LxWxH	‎1.5 x 1.5 x 3 inches
Item model number	‎26933
Item Package Quantity	‎1
Item Weight	‎7 ounces
Manufacturer	‎Jasco Products Company, LLC
Mechanical Life Expectancy	‎2 years
Mounting Type	Wall Mount
Mounting Type	‎Wall Mount
Number of Items	‎1
Operating Voltage	120 Volts
Operating Voltage	‎120 Volts
Operation Mode	ON-OFF
Operation Mode	‎ON-OFF
Part Number	‎26933
Product Dimensions	‎1.5 x 1.5 x 3 inches
Size	‎Dimmer
Style	‎Motion Dimmer
Switch Style	Motion Dimmer
Switch Style	‎Motion Dimmer
Terminal	Spdt
Terminal	‎Spdt
Unit Count	‎1.0 Count
Upper Temperature Rating	‎40 Degrees Celsius
Warranty Description	‎2-Year Limited Warranty
Wattage	‎600 watts

5 Star

4 Star

3 Star

2 Star

1 Star

Ikteb ir-reviżjoni tiegħek

L-email tiegħek mhux se tiġi ppubblikata. L-oqsma obbligatorji kollha huma mmarkati bi^*

Il-klassifikazzjoni tiegħek

Scritto da: Corey

Works well, a bit pricey

The product itself works great. I am using one for my guest bathroom and laundry room. I think the price is a bit high for what you get but there are not a lot of comparable zwave in wall switch/motion sensors. Having the motion sensor built into the switch eliminates the need for a battery or usb cable. Of course, your switch has to be located such that the field of view will detect the traffic like you want. I did have a slight issue getting the switch plate to fit over the switch. The buttons wouldn’t move freely. I just used some sandpaper to make the opening slightly larger and I was in good shape.

Scritto da: Scott Reston

Great switch for half-bath, good Home Assistant support

Installed this in my half-bath and have it connected to Home Assistant via Zwave-JS. It's working great so far. You can configure the light to stay on up to 30 minutes after motion. The motion sensor in Home Assistant reports "OFF" in about 25 seconds. I put a contact sensor on the bathroom door and set up a template sensor that's "on" when there's motion from the switch sensor or the door is closed. I have Home Assistant turn off the light when that sensor goes "off". So in practice, if you close the door, the light will stay on for you whether you move around enough to keep the motion sensor happy. But if the door is open, the light'll turn off after about 25 seconds with no motion. This works great for us as you can see the reflection of the bath light on our living room TV.

Scritto da: RAF

Got to know what you are doing :)

I have about a dozen of these in my new home and they are working great. But unlike more most reviewers I use Hubitat and not Wink or Smartthings. Hubitat allows controlling the advance features of this device and also does not use an internet connection to a remote Wink or Smartthings server. I have my switches setup in "Automatic" mode and when the light turns on Hubitat switches the mode to manual. This allows me to control the switch in a more sophisticated way. For example, in our master bathroom with the switch in automatic mode you walk into the room and the lights turn on immediately. But leaving the switch in automatic mode is a problem when we go into our walk in shower and are out of view, after X number of minutes the lights would turn off. The solution was to put a motion sensor in the shower (it has a high ceiling and stays dry). By creating a Hubitat rule and switching the dimmer to manual mode once the lights are turned on and using motion seen by either motion sensor, the shower or GE dimmer, Hubitat keeps the lights on in the bathroom. The shower motion sensor has another rule to turn on the shower lights and fan (another GE Z-Wave Switch).. The combination of Automatic and Manual modes and the Hubitat controller has been a very useful technique in automating my home lighting. Hubitat also controls the dimmer settings used throughout the day and night and I've seen no issues. It's nice to walk into the bathroom late at night or early morning and now be blinded with very bright lights!

Scritto da: Pierce Thomas

Works well, would recomend if a motion switch is needed.

I recently took the leap into starting my smart home. I purchased a few switches and thought I would leave a review that other might find helpful as a first-time setup. Below are a few details about my current configuration with the GE 26933 Motion Switch. Setup: I am using 4 of the Cree 9.5W Dimmable LEDs Cree 65W Equivalent Soft White (2700K) 9.5W BR30 9W Dimmable LED Flood Light Bulb (4-Pack) For a total load of about 47.5w on the switch. One note about the bulbs (not necessarily about the switch) is the fact that there is a slight buzzing noise, but only while in a dimmed state. PRO: • Smooth Dimming • Silent operation (no noise turning on or off) • 4x configurable associations • Motion sensing • Never worry about turn off (if you have the motion sensing activated, you never have to worry about shutting the switch off.) CONS: • Very large body (This switch takes up a lot of space in the junction box, make sure you have enough room) • No settable minimum brightness (some of the Lutron switches have a configurable minimum for LEDs) • Minimum brightness is not the same as other GE Z-Wave switches such as the GE 14294. Minimum on the GE 26933 is roughly what 30% would be on the GE 14294. The GE 14294 will go completely dark if dimmed all the way and will appear “off”. • If the switch is turned on by motion, it never appears to turn off in the Hub. It is as if the switch “dims” to 0% (not a big deal, but it does show the Hub that it is on) • I had difficulties trying to change the motion settings using the buttons as the manual describes. • No supplied cover. The Lutron screw less cover “White” matches the switch perfectly.Lutron Claro Single-gang Wallplate - Parent All in all I do really enjoy this switch, there are a few quarks to get around, but the motion sensing works very well. I have this switch installed next to stairs and it lets me know when someone is coming up. It has an automatic time out that is “configurable”, but I have yet to get it to change from the default of 5min. The color of this switch and other