Drill America DWT54455 1/4-20 UNC Vit tal-Qiegħ tal-Azzar ta' Veloċità Għolja, (Pakkett ta' 1) Tap tal-qiegħ 1/4-20

Name: Drill America DWT54455 1/4-20 UNC Vit tal-Qiegħ tal-Azzar ta' Veloċità Għolja, (Pakkett ta' 1) Tap tal-qiegħ 1/4-20
Brand: Drill America
SKU: 0887861070980
Availability: InStock

Brand:Drill America

3.5/5

€

Drill America DWT Series High Speed Steel viti tal-idejn huma l-viti l-aktar versatili għall-użu tal-idejn, jew għat-tapping taħt il-qawwa. Il-viti tal-idejn huma popolari għall-użu fit-tapping ġenerali tal-magni jew it-tapping CNC. Għal ħjut mill-ġdid u jagħmlu ħjut ġodda. Il-Viti tal-Idejn tal-Azzar b'Veloċità Għolja jidħlu fi tliet stili: Stil Taper: Jibda l-kwadru tal-ħajta mal-biċċa tax-xogħol. Plug Style: Ġeneralment użat fit-toqob. Stil tal-qiegħ: Iġġenera l-ħajta fil-qiegħ tat-toqba. Sett tal-vit fih 1 taper, 1 plug u 1 vit tal-qiegħ.

Ammont

Żid mal-CART Ixtri issa

EAN: 0887861070980

Kategoriji Industrijali u Xjentifiċi, Għodod tal-Qtugħ, Viti, Idejn Threading Viti,

Għodod mhux miksija għandhom biss is-sottostrat bażi mingħajr ebda trattament jew kisjiet addizzjonali u huma adattati għal firxa wiesgħa ta 'applikazzjonijiet. Il-viti tal-idejn huma popolari għall-użu fit-tapping ġenerali tal-magni jew it-tapping CNC. Viti ta 'l-idejn ta' l-azzar b'veloċità għolja huma l-viti l-aktar versatili għall-użu ta 'l-idejn, jew għat-tapping taħt il-qawwa. Il-Viti tal-Idejn tal-Azzar b'Veloċità Għolja jidħlu fi tliet stili: Stil Taper: Jibda l-kwadru tal-ħajta mal-biċċa tax-xogħol. Plug Style: Ġeneralment użat fit-toqob. Stil tal-qiegħ: Iġġenera l-ħajta fil-qiegħ tat-toqba. Użati biex isiru ħjut ġodda jew jerġgħu jdaħħlu ħjut bil-ħsara u/jew iġġammjati.

Country of Origin	China
Is Discontinued By Manufacturer	No
Item model number	DWT54455
Manufacturer	Drill America
Package Dimensions	2.83 x 0.55 x 0.55 inches; 0.63 Ounces
size	1/4"-20

5 Star

4 Star

3 Star

2 Star

1 Star

Ikteb ir-reviżjoni tiegħek

L-email tiegħek mhux se tiġi ppubblikata. L-oqsma obbligatorji kollha huma mmarkati bi^*

Il-klassifikazzjoni tiegħek

Scritto da: Kindle Customer

Quality

Great product, fair price love it.

Scritto da: TheShaww

Used it on the left pedal of my kid's bike. Worked perfectly.

The pedal on my daughter's bike got boogered up, and when trying to take it off, the threads were damaged. I didn't have any other way of fixing, so I was going to replace her bike. This little purchase saved me 100 bucks. Worked great.

Scritto da: steve allen

Good value

Worked great

Scritto da: T.H.

Awesome Tap. Chased Cast Iron

I had an antique made of cast iron and had several crusted shut or heavily rusted bolt holes. I bought this tap in the 1/2-12 size. It opened, chased and rethreaded all the holes without skipping a beat. I locked the tap in a pair of Vise Grip pliers and turned slowly. It cut right through the rust first pass and brought those 80 year old bolt holes back to life. I was really impressed with the quality of the tap for the price.

Scritto da: J Osborne

Decent but these vary a lot - caution

I've gotten a few of these from Drill America as well as some other brands...some are clearly the same manufacturer and some are different. The ones from Drill America are quite inconsistent in varying aspects. The steel is a decent hss, not the cruddy low quality M50 type, so that's good. For this tiny M2 bottoming tap the teeth are ground well and the tip looks good. About 11mm of depth with a taper up to the shank. The square flats are a little rough but once again they flubbed the heel. It's chamfered but not to a point, nor is there an indent on the flat. This makes it hard to use a follower and with very small taps like this, you really should use a follower/guide to ensure that you are plumb with the hole. Failure to do so almost guarantees tap breakage (true for large taps as well but you have a lot more room for error there, generally). I'd say if you need standard quality, pay the difference and get a good tap. These are not terrible, though, and they are a LOT better than the junk that comes from many vendors or in those watchmaker tap kits (stay away from those unless you're spending big bucks on a set). I got the 3pc M2.5 set on this order as well, and that was a small disappointment but again, they're ok.

Scritto da: bovalle86

Did the job.

Only used once so far, used to clean up a thread for my snowblower.

Scritto da: Scott K.

Just what I needed

Needed a bottoming tap for a hole that needed to be fairly shallow. After running the regular tap in and out, I followed up with this one and all was perfect. Arrived quickly and works great. May not need again for a while but I know its there when I do.

Scritto da: Lost-One

First bad experience with DA tap.

I have bought and used a lot of DA HSS taps and have had good luck with them and I am hoping this is a one off on the one I just got. I was tapping a blind hole in a piece of brass and had already tapped the hole with a plug tap and then planned to use the DA bottoming tap to finish it off, as soon as the tap started to get resistance to finish off the last couple of threads is snapped like a dry twig, this was in a lathe and using a spring guide to keep it straight so there was no side load and all done by hand power. I'm giving it a three star rating just because of my past experiences with DA taps and hoping that I don't run into this again.

Scritto da: jamie fagan

This is not what it says

So I bought this thinking the description was right and the picture is wrong. Nope. Make no doubt, this is not a 3 inch round 1-1/2 x 8 threading die, but a tiny little tap. Repeated emails to amazon didn't solve the problem so now you know.

Scritto da: J. B

Meh

Not great

Scritto da: Christoph Lamberty

Very good quality

Fast shipping, extremely good quality for a hard to find item

Scritto da: Yafim S.

Excelllent!!!

Excelllent!!!

Scritto da: Ryan Edwards

It worked.

It did want I wanted it to do.