Chicago Pneumatic CP789HR - Drill tal-Enerġija tal-Ajru, Għodod tal-Enerġija u Titjib tad-Dar, 1/2 In.(13mm), Riversibbli, Chuck b'ċavetta, Djar Alu, Manku tal-Pistola, 0.43HP/320W, Torque ta' Stall 15.6 ft. lbf/21.1Nm - 500RPM

Name: Chicago Pneumatic CP789HR - Drill tal-Enerġija tal-Ajru, Għodod tal-Enerġija u Titjib tad-Dar, 1/2 In.(13mm), Riversibbli, Chuck b'ċavetta, Djar Alu, Manku tal-Pistola, 0.43HP/320W, Torque ta' Stall 15.6 ft. lbf/21.1Nm - 500RPM
Brand: Chicago Pneumatic
SKU: 0015451519889
Availability: InStock

Brand:Chicago Pneumatic

3.8/5

€

DESKRIZZJONI TAL-PRODOTT Din hija Parti Ġenwina ta' Sostituzzjoni, In-Numru tal-Mudell u l-Isem għall-Oġġett Li ġej: Frigidaire (FRIGB) 316443901 Relay Board MILL-MANIFATTUR Din hija Parti Ġenwina ta' Sostituzzjoni, In-Numru tal-Mudell u l-Isem għall-Oġġett Li ġej: Frigidaire (FRIGB) 316443901 Relay Board

Ammont

Żid mal-CART Ixtri issa

EAN: 0015451519889

Kategoriji Għodda u Titjib tad-Dar, Għodda tal-Enerġija u tal-Idejn, Għodda tal-Enerġija, Drills, Drills & Imrietel tat-Twaqqigħ, Drills tal-martell,

Operazzjoni mingħajr żejt. Gearing li jġorr il-labra għal durabilità mtejba. L-exhaust tal-manku jnaqqas il-ħoss u jidderieġi l-arja 'l bogħod mill-operatur u l-post tax-xogħol. Teasing throttle għal kontroll preċiż. Għodda perfetta għat-tħaffir, ir-reaming, is-serrar tat-toqob u xogħlijiet li jeħtieġu torque għoli.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Chicago Pneumatic
Brand	‎Chicago Pneumatic
Country of Origin	‎Japan
Customer Reviews	4.8 4.8 out of 5 stars 13 ratings 4.8 out of 5 stars
Finish	‎Clear
Included Components	Bare-tool
Included Components	‎Bare-tool
Is Discontinued By Manufacturer	‎No
Item model number	‎CP789HR
Item Package Quantity	‎1
Item Torque	‎15.6 Foot Pounds
Item Weight	‎0.1 Pounds
Item Weight	‎1.6 ounces
Manufacturer	‎Chicago Pneumatic
Material	‎Metal
Maximum Chuck Size	0.5 Inches
Maximum Chuck Size	‎0.5 Inches
Maximum Power	‎0.43 Horsepower
Part Number	‎CP789HR
Power Source	Air Powered
Power Source	‎Air Powered
Product Dimensions	‎8.1 x 7 x 2.5 inches
Size	‎0.5-Inch
Speed	‎500 RPM
Voltage	0.01 Volts
Voltage	‎0.01 Volts
Warranty Description	‎2 year limited warranty

5 Star

4 Star

3 Star

2 Star

1 Star

Ikteb ir-reviżjoni tiegħek

L-email tiegħek mhux se tiġi ppubblikata. L-oqsma obbligatorji kollha huma mmarkati bi^*

Il-klassifikazzjoni tiegħek

Scritto da: Max the ax

High torque. Teasing throttle. Great for driving large screws.

This is a high quality, high torque drill, with a teasing throttle. This allows you to start slowly, then increase the speed. This drill is great for driving 4" stainless deck screws, without needing to worry about overheating the motor, like on the electric drills / drivers I used before. Need to drive 1000 screws, no need to worry, just drive away. Way more expensive than it's Chinese counter part, but this will definitely last, unlike the discount tool store counterpart, which died after one week. There are also spare parts available for this drill if ever needed.

Scritto da: James W

Powerful industrial-grade drill

First impressions of this drill are very good. As a welder/fabricator, I've been using it for drilling through mild and hardened steel with twist bits and hole saws. I originally purchased the CP 9789 and found that it didn't have enough torque for many steel drilling applications. Furthermore, the trigger on that drill was pretty much on/off, and on is 800 RPM. This one is made in Japan, has a decent keyed Jacobs chuck, good trigger, and is comfortable to use. It's much more robust and resistant to stalling out during standard drilling operations. My only complaint so far is the side handle. It requires an allen key to tighten and it seems like you have to remove the chuck to get the collar off. Note: the drill shipped with the chuck detached. You will need a torx T25 for the LH retaining screw. Spindle thread is 3/8-24.

Scritto da: Logan D.

Five Stars

Loads of torque perfect for high power needs. Definitely built to last