Brinly DD-551-A Sleeve Hitch Aġġustabbli Irmonk Wara Disc Harrow, 39 minn 40

Name: Brinly DD-551-A Sleeve Hitch Aġġustabbli Irmonk Wara Disc Harrow, 39 minn 40
Brand: Brinly
SKU: 0081174045516
Availability: InStock

Brand:Brinly

3/5

€

Wara l-ħrit ta 'għalqa jew ġnien fil-ħarifa, A disc Harrow jintuża fir-rebbiegħa biex tkisser il-ħamrija f'biċċa iżgħar, livell Il-wiċċ u tikseb ħamrija lesta għall-pjanti. Il-Harrow tad-diska Brinly jeħel faċilment ma 'trattur tal-ġnien biex ikisser art mhux maħduma u maħtura mingħajr sforz biex tibda ġnien ġdid jew tipprepara s-sodda tat-tħawwil ta' ġnien eżistenti. Għal effiċjenza massima, għaqqad żewġ diski Harrow flimkien biex jiffurmaw unità tandem għal ħamrija uniformi lixxa. Ara l-manwal għall-istruzzjonijiet.

Ammont

Żid mal-CART Ixtri issa

EAN: 0081174045516

Kategoriji Patio, Lawn u Ġnien, Farm & Ranch, Makkinarju Agrikolu u tal-Kostruzzjoni, Partijiet u Aċċessorji, Aċċessorji bi Tliet Punti,

Magħmula fl-Istati Uniti: Fdat mill-1839, Brinly-Hardy Company ilha ddedikata biex tipprovdi prodotti tal-lawn u tal-ġnien ta' kwalità, durabbli u innovattivi mibnija fl-Istati Uniti. Manutenzjoni Faċli: Fittings tal-grass Zerk tal-hanger tad-diska standard biex jgħinu jipproteġu d-diski għal durabilità dejjiema. Waħħal Unitajiet għall-Effiċjenza Massima: Żewġ harrows tad-diska jistgħu jiġu mmuntati flimkien biex jiffurmaw unità tandem, li jippermettu li l-gang tad-diska ta 'quddiem tarmi l-ħmieġ 'il barra waqt li l-grupp tad-diska ta' wara jitfa' ġewwa. Uża mal-UTV/ATV tiegħek: Iċċekkja l-Brinly One-Point Lift (Mudelli: OPL-BH/OPL-BH-A) biex twaħħal faċilment it-tagħmir tiegħek li jinvolvi l-art mal-UTV/ATV tiegħek. Hitch tal-kmiem Meħtieġa għall-Użu mat-Trattur Tiegħek: Ix-xafra tgħaqqad faċilment ma' kwalunkwe irbit tal-kmiem. L-irbit tal-kmiem mhuwiex inkluż, iżda jista 'jinxtara permezz tal-manifattur tat-trattur tiegħek. Żid il-Piż għal Discing Ibsin: Jista 'jiżdied piż żejjed mat-trej biex tkisser biċċiet tal-ħamrija akbar u iebsin. Tliet Aġġustamenti tal-Angoli: Id-diski tal-azzar jistgħu jiġu aġġustati biex iwasslu l-forza xierqa bbażata fuq id-daqs tal-bċejjeċ u l-kundizzjonijiet tal-ħamrija. Angolu ta '15 ° huwa rakkomandat għal użu ġenerali, 10 ° għal diski inqas aggressivi, u 20 ° għal diski aktar aggressivi. Jgħodd għal Diversi Daqsijiet tal-Ġnien: Wisa 'taħdem aġġustabbli minn 29 sa 39 takkomoda ġonna kemm kbar kif ukoll żgħar. Ikseb Ħamrija Lesta għall-Pjanti: 8 diski ta 'l-azzar heavy-duty li jkejlu 11 f'dijametru jkissru ċ-ċomb u mingħajr sforz idawru art mhux maħduma u maħtura f'ħamrija uniformi lesta għat-tħawwil.

Country of Origin	USA
Customer Reviews	3.9 3.9 out of 5 stars 145 ratings 3.9 out of 5 stars
Item model number	DD-551-A
Item Weight	59.9 pounds
Manufacturer	Brinly Hardy
Product Dimensions	26 x 32 x 14 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Ikteb ir-reviżjoni tiegħek

L-email tiegħek mhux se tiġi ppubblikata. L-oqsma obbligatorji kollha huma mmarkati bi^*

Il-klassifikazzjoni tiegħek

Scritto da: Amazon Customer

Great for already tilled ground!

After looking at the reviews, I was hesitant on purchasing. I read a couple detailed positive reviews and said “what the hell!” and took the risk. This small disc is perfect for gardens with ground that Has already been tilled before. If you are trying to break up tough ground this is not the product for you. When making turns I drove right onto the grass and It did not tear it up. I chose not to buy the hitch attachment and just hooked it up and gave it a go. I have a rock solid 60lb bag of concrete mix bungee strapped on top, if I wanted it to go deeper more weight would’ve done the job. It took me about 10 minutes to put it together.

Scritto da: ARFF156

Not a bad item for the price, but has some limitations.

We bought this to use in the garden on the farm. I'm used to full sized implements, so when I first hooked this up I was a bit disappointed when it just skipped across the dirt. This unit really needs some weight on it to do anything, or the soil must already be very loose. Even with a lot of weight this doesn't quite dig in as much as it should. Aside from that, the instructions are clear and it's easy to assemble. The steel seems heavy enough to last and the paint should also stand up well over time. I pulled this behind a garden tractor and an ATV. If you just want to turn over already loose soil and keep down some small weeds, this will do great. If you plan to pull this behind an ATV and do some sod busting, then move along to something heavier and more expensive. For the price, you can't go wrong. I'll probably buy another one of these next spring to connect to the first backwards and pull them in tandem like a full sized disc. I'm also planning to make steel baskets on top that I can load with weight so they actually dig in.

Scritto da: por_que

Good, little disk harrow

Even with a considerable amount of weight on it, this harrow still has trouble digging in very far. Easy to assemble and the important parts, (disks, axles and bearings) seem heavy-duty enough, although a rock can bend a disk.

Scritto da: JoAnne Franklin

Solidly built

I haven't been able to use it yet since I am waiting on the sleeve hitch. when I use it I will update the review. Putting it together was rather easy for this 87 year old. I have harrowed large acreage and now just looking for something work with my garden tractor. I believe this wil be more than sturdy enough since it is built as solid as larger harrows I used on farm tractors.

Scritto da: Tony

and looks nice, but that's about it

Bought this to work in tandem with an Agrifab toothed cultivator. I thought it would be at least near the quality of the Brinly moldboard I had purchased a few weeks prior, but alas, it isn't. I'll give it this, it is SOLID, very heavy gauge metal, and looks nice, but that's about it. Upon inspecting the parts prior to assembly, I noticed that the welds on the spacers were very rough, with many burs, which had to be removed and smoothed before sliding onto the 16" hex bolt. Next, the disc hanger has to be assembled to make the bearing. The unplated sleeve that slides into the hanger is WAY too tight a fit. It had to be hammered (using a rubber mallet) into place. I figured it was too tight, but also figured that the Zerk might allow enough grease into it to give it enough lube. I was wrong. After assembling (which had other instructional issues), I creased the bearings, and started the drag. No motion on the hub at all, zero, ziltch, nada. And of course, it's so tightly fit now, it won't come apart. So, I have to order 2 new disc hangers, 2 new unplated sleeves, and 4 new bearing gaskets! Note to anyone who buys this, test fit all the parts, and if bearing doesn't go together easily, either return for new parts, or sand down the unplated sleeve until it does fit.

Scritto da: tyke watson

I bought two, awesome equipment

They did all I could ask of them, and then some, I hooked two together,along with a tine roller, also brinly,,, Definitely worked up and clean my garden

Scritto da: Sheryl C

My husband loved the idea. However, it did not work for us.

He like the idea. Put together easily. Hitched to lawnmower. Everything he wanted except it didn't till the garden dirt. He tried and tried. Oh, well, guess we need to buy a tiller

Scritto da: Paul Crislip

Works Great in loose soils.

Got my first one and it did good at breaking up the plowed soil. Got my second one and converted single to tandem set-up and worked great only faster. Also used one to make raised hills for planting crops ,also used one to hill up 2 80 foot long rows of corn and 2 80 foot rows of beans.,Worked super no more hand work. Thanks for another Great Product ,for small garden tractors.