BOSCH 85680MC 1/2 In. x 1 In. Bit-Router Straight Trim Bit-Top-Bearing Double-Flute bit-tarf tal-karbur

Name: BOSCH 85680MC 1/2 In. x 1 In. Bit-Router Straight Trim Bit-Top-Bearing Double-Flute bit-tarf tal-karbur
Brand: BOSCH
SKU: 0000346351873
Availability: InStock

Brand:BOSCH

3.8/5

€

DESKRIZZJONI TAL-PRODOTT Bl-Adapter tal-Martell Rotary BOSCH HA1030 SDS-max għal SDS-plus, l-utent għandu l-opportunità li jestendi l-versatilità ta 'martell li jdur SDS-max mingħajr ma jkollu jġib miegħu għodda addizzjonali. L-adapter jagħmilha possibbli li jintużaw aċċessorji SDS-plus b'għodda SDS-max. L-adapter huwa kompatibbli ma 'marki oħra ta' mrietel rotanti SDS-max. Dan l-adapter imħatteb jiflaħ għat-talbiet professjonali fuq il-post tax-xogħol. MILL-MANIFATTUR Mikro grain bits b'ball bearings immuntati fuq ir-rikba ma' mudelli għar-rotot tal-mudell

Ebda unitajiet disponibbli

EAN: 0000346351873

Kategoriji Għodda tal-Enerġija u tal-Idejn, Power Tool Partijiet u Aċċessorji, Partijiet u Aċċessorji tar-router, Bits tar-router, Straight, Spiral & Trim Bits, Dritta,

L-istrixxi b'saħħtu u l-appoġġ tqil tal-qtugħ jestendu l-ħajja tal-bit. Iddisinjat għal xogħol ta' mudell u mudell. Qtugħ bilanċjat b'vibrazzjoni minima. Id-disinn tal-qtugħ tal-kontroll jgħin jimminimizza l-kickback.

Batteries Required?	‎No
Customer Reviews	4.8 4.8 out of 5 stars 56 ratings 4.8 out of 5 stars
Included Components	‎
Is Discontinued By Manufacturer	‎Yes
Item model number	‎85680MC
Item Package Quantity	‎1
Item Weight	‎3.2 ounces
Manufacturer	‎Bosch
Material	‎Carbide
Part Number	‎85680MC
Product Dimensions	‎5.37 x 3.34 x 1.02 inches
Warranty Description	‎No

5 Star

4 Star

3 Star

2 Star

1 Star

Ikteb ir-reviżjoni tiegħek

L-email tiegħek mhux se tiġi ppubblikata. L-oqsma obbligatorji kollha huma mmarkati bi^*

Il-klassifikazzjoni tiegħek

Scritto da: Sofa Kingdom

Buyer beware!!

Though this router bit works great for its intended purpose, I must warn you all about one huge problem that can occur and did to me. There is a very tiny little Allen key nut on the roller bearing. I made my first pass on my subwoofer box and it worked perfectly. But as I was making my second flush cutting pass, the roller bearing slid up the shank in mid cut causing the bit to chew a quarter inch into my cutout. I was so mad because everything was going so well. This is a mistake that can't really be fixed. I mixed up some saw dust and tite bond in hopes that it will fill in the huge gap that this bit caused. I was able to tighten the bearing down but of course it stripped being that it's so tiny. It's 1.5mm or something. I highly suggest you immediately tighten this down before using. Otherwise this worked great ????

Scritto da: Van

Good Value

It worked as advertised.

Scritto da: D. Rice

The only thing I don't like about these bits is the collet with the set ...

This Bosch router bit 1/2 x 1 was purchased to replace the 1/2 x 1 Bosch pattern bit that was part of a 3 piece pattern bit set. The orginal bit I owned failed and the carbide became chipped on the very tip. I used it quite often and I was probably trying to hog out too much material too fast. The only thing I don't like about these bits is the collet with the set screw that holds the bearing in place. I have learned over the years every time I use these bits I always check to make sure the learning is good and tight. I have had the set screw come out in the past, and with a bit spinning at 28,000 rpm good luck finding the set screw! LOL I use blue (serviceable) lock-tite on the set screws now and the problem is not a problem anymore, but I still check them from time to time.

Scritto da: Mitchell

Bosch bits are quality

Sure you can get cheaper bits, but they just won't deliver the same consistent results as Bosch router bits.

Scritto da: Jason Thornton

Worked great

no issues

Scritto da: Walter N Nichols

Bosch quality

My neighbor kept borrowing this bit so I bought him one.

Scritto da: ken lear

Worked great

Exeactly what I needed

Scritto da: hh

BOSCH ROUTER BITS

We've been using the Bosch router bits in our production operations for at least 7 years now. From our experience Bosch is the only manufacturer to builds bits that stay sharp past a single use.

Scritto da: Leonardo Navarro

Excelente !

Nueva y excelente calidad la de Bosch, muy buena broca.