Blackstone 5019 Kit ta' Konverżjoni tal-Propan għal Gass Naturali 10 pied x 3/8 Manka, Wrench ta' 7mm, 2 Orifiċi, Adapter Quick Connect Perfett għal BBQ, Grill, Forn tal-Pizza, Patio Heater (Fits Select Models), Griż

Name: Blackstone 5019 Kit ta' Konverżjoni tal-Propan għal Gass Naturali 10 pied x 3/8 Manka, Wrench ta' 7mm, 2 Orifiċi, Adapter Quick Connect Perfett għal BBQ, Grill, Forn tal-Pizza, Patio Heater (Fits Select Models), Griż
Brand: BLACKSTONE
SKU: 0717604050194
Availability: InStock

Brand:BLACKSTONE

3.8/5

€

Tista 'ssib l-affarijiet kollha meħtieġa għall-konverżjoni tal-gass f'post wieħed? Ħsejjes improbabbli, iżda dan il-kit ta 'konverżjoni tal-gass naturali minn Blackstone għandu dan kollu. Fih żewġ orifiċi tal-gass naturali għal stufi. Fih ukoll pajp twil tal-gass naturali għall-grill. Il-kit għandu wrench orifiċju 7mm. Il-wrench hija esklussivament kompatibbli mal-orifiċi. Il-wrench jagħmel l-immaniġġjar tal-orifiċi faċli. Dan l-orifiċju u l-pajp jistgħu jintużaw fuq stufi. Il-klijenti jistgħu wkoll jużaw dan l-orifiċju tal-gass naturali fuq grills. Dan il-kit ta' Blackstone fih fitting ta' konnessjoni rapida. Barra minn hekk, f'dan il-kit huwa pprovdut ukoll adapter li jgħaqqad malajr. Huwa faċli li tirritorna u tissostitwixxi dawn il-prodotti. Blackstone jipprovdi garanzija għal sena. Il-proċedura tar-ritorn hija wkoll faċli ħafna. Il-klijenti jgawdu ritorni faċli għal perjodu esklussiv. Ħu l-inkarigu tal-barbecues tiegħek. Ikseb dan il-kit ta 'konverżjoni tal-mejda Blackstone illum!

Ammont

Żid mal-CART Ixtri issa

EAN: 0717604050194

Kategoriji Patio, Lawn u Ġnien, Gradilji u Tisjir ta' Barra, Partijiet ta 'sostituzzjoni tat-tisjir ta' barra, Konnetturi tal-Grill u Manek,

Perjodu ta 'garanzija eċċellenti: Blackstone joffri garanzija ta' sena għall-prodotti kollha tagħhom. Il-garanzija tkopri anke l-pajp tal-gass naturali. Il-klijenti huma liberi li jagħmlu użu mill-benefiċċji tal-garanzija għal sena. Il-kumpanija tipprovdi wkoll prospetti mingħajr fuss. Il-faċilità tar-ritorn hija valida għal perjodu esklussiv. Fih wrench u adapter: Dan is-sett ta’ orifiċju tal-gass naturali fih żewġ wrenches. Fih ukoll żewġ fittings u adapters ta' konnessjoni mgħaġġla. Il-kit kollu huwa estremament utli u effiċjenti. Disinn sleek u materjali ħfief huma bonus. Multipurpose: Il-kit jista 'jintuża għal stufi u grills. Tista 'wkoll tuża dan l-orifiċju tal-gass naturali għall-heater tal-patio. Madankollu, dan il-pajp tal-gass u l-orifiċju huwa inkompatibbli mal-mudell Blackstone 1891. Dan il-pajp tal-gass huwa tajjeb għall-gass naturali bi pressjoni tal-kolonna tal-ilma ta '7 pulzieri. Jiġi b'żewġ orifiċi: Il-kit ta 'l-orifiċji tal-gass naturali ta' Blackstone fih żewġ orifiċi. Dawn l-orifiċi jistgħu jgħinu fil-konverżjoni faċli. L-orifiċi huma kompatibbli mal-biċċa l-kbira tal-griddles jew stufi. Iż-żewġ orifiċi huma żgħar u sleek fid-disinn. Tul żejjed biex taqbel mal-iskop tiegħek: Dan il-kit ta 'konverżjoni tal-orifiċju tal-gass naturali għandu pajp żejjed. Il-pajp huwa twil 10 pied. Dan il-pajp twil jista 'jintuża faċilment barra. Huwa kompatibbli mal-gass naturali. Dan il-pajp Blackstone huwa magħmul minn materjali extra b'saħħithom.

Country of Origin	China
Customer Reviews	4.8 4.8 out of 5 stars 23 ratings 4.8 out of 5 stars
Item model number	5019
Item Weight	2.88 pounds
Manufacturer	Blackstone
Product Dimensions	10.24 x 2.36 x 10.24 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Ikteb ir-reviżjoni tiegħek

L-email tiegħek mhux se tiġi ppubblikata. L-oqsma obbligatorji kollha huma mmarkati bi^*

Il-klassifikazzjoni tiegħek

Scritto da: Harry S. Rex

Does the job

Does what it's made for.

Scritto da: JL

Works With 22" Adventure Ready With some tweaks.

So if you are looking to convert your 22" Blackstone Adventure Ready portable griddle with Hood and Stand, this will work with some modifications. After trying to remove the H tube out of the griddle forever, there was no way of getting it past the top lip they added to the back of the griddle where the hood would meet, no matter how you angle it, it will not come out. I did not want to cut any parts of the griddle as to not damage the protective paint. SO to gain access to the orfice that is placed inside the front of the H tube.... You will have to drill out a couple rivets on one side of the front face cover where the gas components and control knobs are. I opted for the right side where the propane tube connection is. Use a drill bit about the size of the rivet head hole, make sure the bit isn't as big as the hole the rivet goes through so you dont damage the cover paint. It should be quick, drill enough so you can use a plier or flat head to seperate the rivet head from the stem on either side. You will now be able to move the cover forward at an angle enough so you can drop the fuel nozzle down, in order to undo the smaller propane orifice and replace it with the two larger Natural Gas orifice provided. There are three screws behind each knob that holds the ignitor and fuel control orfice in place on the front face cover. BECAREFUL when tightening the NG orfice, triple check with hand before lightly hand tightening with tool. First one sat nicely and screwed in pretty hand tight. However my 2nd one did not seat right and somehow stripped the screw hole before it even got all the way in. I was not able to hand tighten in before it spun around and start catching a little again. There was some gas leak because of it. I was able to add extra layers of PFTE tape made for NG to help it seal completely and be able to tighten a little more. There were also issues with people stripping the orifice threads so it can go both ways. I feel like the largee cheaper set made for larger griddles with extra orfices would work also with this griddle; but I'm not positive if there are differences in sizes of the orfice screw or even tube connection size. DO NOT FORGET to use sealant or PFTE tape to seal the new orfices and tube connections. For me, I needed a 3/8 FL (Flare) male to 1/2 MIP (Male Iron Pipe) reducing adapter you can get at Home Depot or Lowes to connect the provided quick disconnect adapter to the 1/2" Gas line outside the house. You can get some screws and nuts also at the hardware store to tighten the front face cover back on where the rivets used to be. Look at the screws they use on the H tube if you want something that matches. I just temporarily used an insulated copper wire and looped it through the two holes to hold it in place. The NG needs to be first filled in the H tubes for several seconds when first turning on. Then turn it off and turn the knob to ignite and light the griddle. This is the only way I could light the griddle and has something to do with the design of the H tube and natural gas. Happy grilling, hopes this helps at least one person!

Scritto da: chris adams

Works good

Nice kit and works as should, only problem was a connector leaked and had to be resealed, third time was the charm and no leaks

Scritto da: Annie L Poole

Easy install

After changing the orifice, the flame looks good. The only concern I have , it may work too good. The flame is too high when the control knob is on high. The cooking serface overheats fairly easy.