AAA 90036 Kit tal-Pompa tal-Washer tal-Pressjoni ta' Sostituzzjoni tal-Plunger Triplex Orizzontali, 3200 PSI, 2.8 GPM, 3/4 Shaft, Jinkludi Hardware u Tubu Sifun, għal Magni Industrijali li jaħdmu bil-Gass, Iswed 9.6GA12 3200PSI @ 2.8GPM

Name: AAA 90036 Kit tal-Pompa tal-Washer tal-Pressjoni ta' Sostituzzjoni tal-Plunger Triplex Orizzontali, 3200 PSI, 2.8 GPM, 3/4 Shaft, Jinkludi Hardware u Tubu Sifun, għal Magni Industrijali li jaħdmu bil-Gass, Iswed 9.6GA12 3200PSI @ 2.8GPM
Brand: SIMPSON
SKU: 0879399002069
Availability: InStock

Brand:SIMPSON

3.5/5

€

Inġinerija biex taqbeż l-aspettattivi, il-Pompa Triplex Professjonali 90036 AAA® hija effiċjenti ħafna u timminimizza t-tagħbija tal-magna filwaqt li tagħti prestazzjoni mill-aqwa. Dan il-kit ta 'sostituzzjoni tal-pompa faċli biex jiġi installat huwa għal washers tal-pressjoni tal-gass* b'magna orizzontali u xaft ta' dijametru 3/4, bħall-Honda GX200. Din il-pompa tista 'tipproduċi sa 3200 PSI f'2.8 GPM. Id-90036 huwa ddisinjat b'ball bearings doppji ta 'daqs kbir biex inaqqsu l-frizzjoni u jippermettu prestazzjoni fit-tul fl-ambjenti tat-tindif l-aktar ħorox. Id-90036 għandu magna tal-ħatt integrat tal-istainless steel li fiha s-sistema ta 'bidu faċli tagħna. (*Iċċekkja l-orjentazzjoni tad-daħla u tal-ħruġ tal-washer tal-pressjoni tiegħek biex tiżgura l-kompatibilità)

Ebda unitajiet disponibbli

EAN: 0879399002069

Kategoriji Patio, Lawn u Ġnien, Għodda ta' l-Enerġija ta' Barra, Partijiet ta 'sostituzzjoni u Aċċessorji, Pressure Washer Partijiet u Aċċessorji, Aċċessorji,

Konnessjonijiet Standard: Din il-pompa ta 'sostituzzjoni għandha daħla tal-pajp tal-ġnien u ħruġ tal-pajp ta' pressjoni għolja ta 'konnessjoni M22 bil-kamin; Użaha ma 'ħafna pajpijiet tal-washer tal-pressjoni, inklużi l-mudelli Simpson MorFlex 40224, 40225, 40226 u l-mudell Santoprene 41182. Kun af meta tbiddel iż-żejt tiegħek: Il-ħġieġa tal-vista u t-teknoloġija avvanzata tas-siġill taż-żejt telimina l-ħtieġa għal dipstick. B'viżibilità għal-livell taż-żejt u ż-żejt innifsu, tista 'tara faċilment meta l-livelli taż-żejt huma baxxi jew jekk l-ilma ċċajpar iż-żejt. Qawwa aġġustabbli: Il-pompa tinkludi Teknoloġija PowerBoost li tagħti pressjoni ogħla fiż-żennuna għal esperjenza ta 'tindif aktar effiċjenti; Hemm ukoll pum li jdur bl-idejn li jippermettilek tnaqqas il-qawwa fil-konvenjenza tiegħek għal ħidmiet li jeħtieġu pressjoni aktar baxxa. Kompatibbiltà: Il-mudell tal-bolt standard SAE joqgħod ħafna washers tal-pressjoni tal-gass b'magni orizzontali. Biex tiżgura l-kompatibilità, kun żgur li tqabbel l-orjentazzjoni tal-magna, PSI, GPM, dijametru tax-xaft tal-magna, u l-konnessjoni tad-daħla u l-ħruġ tal-pompa kurrenti. Estendi l-ħajja tal-washer tal-pressjoni tiegħek: Iffranka l-flus billi tissostitwixxi l-pompa tiegħek minflok tixtri power washer ġdid. Dan il-kit faċli biex jiġi installat huwa kbir għal power woxers li jistgħu jappoġġjaw 3200 PSI f'2.8 GPM biex jaħslu ħitan, bankini, vetturi, u aktar.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	SIMPSON
Brand	‎SIMPSON
Color	Black
Color	‎Black
Country of Origin	‎China
Customer Reviews	4.5 4.5 out of 5 stars 177 ratings 4.5 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Included Components	‎Pump
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Item Dimensions LxWxH	12 x 9 x 4 inches
Item Dimensions LxWxH	‎12 x 9 x 4 inches
Item model number	‎90036
Item Package Quantity	‎1
Item Weight	9 Pounds
Item Weight	‎9 Pounds
Manufacturer	‎simpson
Material	Stainless Steel
Material	‎Stainless Steel
Maximum Flow Rate	2.8 Gallons Per Minute
Maximum Flow Rate	‎2.8 Gallons Per Minute
Measurement System	‎US
Part Number	‎90030
Power Source	Gas Powered
Power Source	‎Gas Powered
Product Dimensions	‎12 x 9 x 4 inches
Size	‎3/4" Shaft
Style	9.6GA12 3200PSI @ 2.8GPM
Style	‎9.6GA12 3200PSI @ 2.8GPM
Thickness	‎N/A Inches
Warranty Description	‎5 year warranty

5 Star

4 Star

3 Star

2 Star

1 Star

Ikteb ir-reviżjoni tiegħek

L-email tiegħek mhux se tiġi ppubblikata. L-oqsma obbligatorji kollha huma mmarkati bi^*

Il-klassifikazzjoni tiegħek

Scritto da: AMoran

Easy fix for an amateur!

This was so easy to install on my pressure washer- especially with the short how to video. Save yourself a ton of repair up charges and do it yourself- even a novice, like myself, could handle this. It too me a little longer than the video because my original pump was rusted onto the shaft- but I saved $300 doing it myself vs taking it to my small engine repair guy.

Scritto da: Dani

Correct Application

Arrived as promised

Scritto da: Redbird567

It works

I bought this to replace a AAA Pressure Washer Pump 8.7GA12 that came on my Simpson Aluminum ALH3225 Pressure washer. Install was super easy, four bolts off, four bolts back on. Works fine. I hope Simpson is reading as my original pump was/is still under warrantee and I was approved for a replacement back in October of 2020, it is June of 2021 and it is still not in. No amount of calling customer service helps because , well, it's not there fault or problem. All warrantee is handled by a third party. Remember that the next time you want to buy anything made by Simpson.

Scritto da: R. English

Exact fit and easy peasy

It was nearly six months after I purchased this before I got around to changing it out. My Simpson Power Washer was new and I had used it only one time in fall. I tried to clear out the water in the pump when I was done and put it away, but I did not use the antifreeze kit that is small pressure can and that cost me the pump. The next time I went to use it, the winter cold had frozen remaining water in the pump and that made it totally ineffective and lost all pressure. I was pleased to find this and ordered it. The repair shop wanted close to $250 to examine the unit and I had to drive an hour just to drop it off so this replacement part was a much more desireable option. I didn't know what to expect until I replaced it. It took me less than 10 minutes to put the new pump on. Four bolts and the original slid off the keyed shaft, I then slid the new pump on the shaft with attention to aligning it to the key and tightened up the bolts and done! Totally repaired and very happy with this part and ease of repair.

Scritto da: Paul A. Skinner

OEM Replacement Pump

After lots of research, I bought/installed this pump, which is a perfect OEM replacement for the original AAA pump on my Simpson pressure washer. It bolted up to the engine without any problems. The three-star rating for longevity is based on my research that revealed that this pump is not worth rebuilding. One upgrade: this pump includes an adjustable pressure regulator that was not adjustable on the original.

Scritto da: Uncledavemann

Horrible customer service

I bought this to replace a pump that would not allow water to flow through my pressure washer pump when connected to a water source prior to starting the engine. My old unit was in storage for about a year or so. This pump arrived in bomb proof packaging and I had high hopes that it would suit my needs. It did not, so I called the customer service number included with the pump to figure out what could be the issue. As I told the customer service rep from AAA when she informed me that she had no way of knowing what shape my new pump was in when I received it as I didn’t buy it from them directly, “ this could have been delivered to me by dropping it out of an airplane and it would have been just fine”. Unfortunately, it had the exact same issue as my old unit ; when connected to the hose, prior to starting the pressure washer, no water would flow through the pump. So I called the customer service number included with the replacement pump to find out if there was any possibilities that I was some how doing something wrong. The rep asked me if I had installed the pump already. My reply was that I couldn’t know it was defective unless I installed it. She told me that immediately voided the warranty! ??? I explained that I was only looking for technical info as to why a brand new pump would fail in the same manner as the old seized pump, again thinking the problem would some how be something I was doing in error. The rep refused to offer any suggestions other than to pay out of pocket at one of their service centers as I had voided the warranty by actually installing it myself. Why sell to the public if they can’t do the install? Never found out what the issue was with the new pump as I was able to fix the old one with a few careful taps from a hammer. Thank goodness for amazons generous return policy as this is not a cheap item.

Scritto da: Dave

The pump will fail with out water.

I purchased this to replace the original pump on my Simpson pressure washer which was almost new. The pump works great and is the same as on the original pressure washer. I would caution that the pump works great as long as the water is turned on. The pump is of a very good quality but has plastic valves - if the water stops the pump heats up very quickly and the plastic valves just melt and the pump no longer functions. This was my experience - the water stopped and the valves melted. I purchased the entire pump since just the valve portion was not available.

Scritto da: Francisco Ponce

Súper buena y potente

Facilísimo de instalar y súper buena inversión

Scritto da: Gatorzz

Perfect

Perfect

Scritto da: Gerard l.

Très performant merci

Va surpaire bien